ROOF RACK (10x T-Nut KIT)
$24.99 USD
NOW SHIPPING --> M8
PRE-ORDER --> M10 --> SHIPS (27 MAY 2022)
This T-Nut KIT includes (10) T-Nuts engineered for maximum performance and compatibility with the Chief Products roof rack system. We now offer them in (3) sizes (M6, M8 & M10) to accommodate any accessory you find. Designed to fit perfectly within our Planks and Tie-Down Plates. These high-tensile 10.9 Grade T-Nuts can handle anything you throw at them. Blackened to look great when installed, and coated in Black Oxide to ensure they stay that way even in the most hostile environments.
This T-Nut KIT includes (10) T-Nuts engineered for maximum performance and compatibility with the Chief Products roof rack system. We now offer them in (3) sizes (M6, M8 & M10) to accommodate any accessory you find. Designed to fit perfectly within our Planks and Tie-Down Plates. These high-tensile 10.9 Grade T-Nuts can handle anything you throw at them. Blackened to look great when installed, and coated in Black Oxide to ensure they stay that way even in the most hostile environments.
| 10 | M6 T-Nuts (Grade 10.9) (Black Oxide) |
| 10 | M8 T-Nuts (Grade 10.9) (Black Oxide) |
| 10 | M10 T-Nuts (Grade 10.9) (Black Oxide) |
ROOF RACK (2x Plank KIT -- 1146mm)
$236.99 USD
Planks are a key building block of our modular roof rack system. This KIT includes (2) Planks; measuring 1146mm (45.12") long, 156mm (6.14") wide and an amazing 25mm (0.98") thin. Our Planks are designed so they can be easily bolted to our Mounting Rails in various configurations. This allows our customers to create a ‘Roof Platform’ that best suits their needs. It also enables our customers to easily add/move/change their Planks to meet whatever future needs may arise. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to bolt/fasten to the Plank at any point along the entire length of the Plank.
Planks are a key building block of our modular roof rack system. This KIT includes (2) Planks; measuring 1146mm (45.12") long, 156mm (6.14") wide and an amazing 25mm (0.98") thin. Our Planks are designed so they can be easily bolted to our Mounting Rails in various configurations. This allows our customers to create a ‘Roof Platform’ that best suits their needs. It also enables our customers to easily add/move/change their Planks to meet whatever future needs may arise. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to bolt/fasten to the Plank at any point along the entire length of the Plank.
We utilise a proprietary Aircraft-Grade Aluminium Alloy and an advanced Extrusion Manufacturing Process that allows us to deliver Planks with an extremely high strength-to-weight ratio. As an example, one of our Planks can easily hold a 300kg person (standing directly in the middle of a 1.2M Plank) and it only weighs 2.5kg.
| 1146mm | PLANK LENGTH (45.12 inches) |
| 156mm | PLANK WIDTH (6.14 inches) |
| 25mm | PLANK THICKNESS (0.98 inches) |
| 2.56kg | INSTALLED WEIGHT (1 plank) |
ROOF RACK (2x Tie-Down Plate KIT)
$76.99 USD
Our Tie-Down Plates are engineered to provide numerous ways to secure gear and accessories to your roof rack. They clamp securely between our Planks in a way that allows them to easily move and fasten anywhere along the entire length of the Planks. Manufactured from Aircraft-Grade Aluminium Alloys and High-Strength Steel, they're extremely strong to meet the high demands they're sure to encounter. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M8 & M10) that can be used to fasten/bolt just about any accessory you can find. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your platform.
Our Tie-Down Plates are engineered to provide numerous ways to secure gear and accessories to your roof rack. They clamp securely between our Planks in a way that allows them to easily move and fasten anywhere along the entire length of the Planks. Manufactured from Aircraft-Grade Aluminium Alloys and High-Strength Steel, they're extremely strong to meet the high demands they're sure to encounter. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M8 & M10) that can be used to fasten/bolt just about any accessory you can find. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your platform.
| 115mm | TIE-DOWN PLATE LENGTH (fully assembled) |
| 110mm | TIE-DOWN PLATE WIDTH (fully assembled) |
| 0.50kg | INSTALLED WEIGHT --> 1x Tie-Down Plate |
| 2 | TIE-DOWN PLATE (Top) (Cast from Aircraft-Grade Aluminium Alloy) |
| 2 | TIE-DOWN PLATE (Bottom) (5mm High-Strength Steel) |
| 4 | M8 x 20mm BOLTS (Round Head - Socket) (316 Stainless Steel) |
| 4 | M8 WEDGE-LOCK WASHERS (Zinc Flake Coating) |
| 1 | Installation Instructions |
| TIE-DOWN STRAP HOOK on CENTRE SECTION |
| ROPE pass through CENTRE SECTION |
| (2) T-NUT SLOTS --> M8 BOLT into M8 T-NUT (upper location between plates; includes room for bolt pass through) |
| (2) T-NUT SLOTS --> M10 BOLT into M10 T-NUT (upper location between plates; includes room for bolt pass through) |
| (2) T-NUT SLOTS --> M8 BOLT into M8 T-NUT (HEAVY DUTY --> lower location below both plates; includes room for bolt pass through) |
| (2) T-NUT SLOTS --> M10 BOLT into M10 T-NUT (HEAVY DUTY --> lower location below both plates; includes room for bolt pass through) |
| (2) T-NUT SLOTS --> M12 CARRIAGE BOLT into SQUARE HOLE (Lower Plate) (HEAVY DUTY --> up through lower plate) |
| (2) T-NUT SLOTS --> M8, M10 & M12 BOLT pass through both PLATES (nut below lower plate) |
| (2) M8 MOUNTING BOLTS --> REPLACE with LONGER MOUNTING BOLT (using weld nut on lower plate) |
ROOF RACK (4x Plank End-Cap KIT -- Slotted)
$37.99 USD
Our Plank End-Caps provide a nice finish to the ends of our Planks and are great for anyone that isn't running our WK2 Roof Rack (Platform Frame KIT). This KIT includes (4) Plank End-Caps, (enough for 2x Planks). They bolt on easily and feature (7) slots (just like a traditional Jeep grille).
Our Plank End-Caps provide a nice finish to the ends of our Planks and are great for anyone that isn't running our WK2 Roof Rack (Platform Frame KIT). This KIT includes (4) Plank End-Caps, (enough for 2x Planks). They bolt on easily and feature (7) slots (just like a traditional Jeep grille).
ROOF RACK (Anchor Point)
Coming Soon $0.00 USD
Roof Rack (Anchor Point)
Roof Rack (Anchor Point)
ROOF RACK (Roof Top Tent KIT)
$50.99 USD
Our Roof Top Tent KIT is designed to make installation of your Roof Top Tent super easy. The KIT includes (4) Roof Top Tent Brackets made from 5mm steel. These brackets, along with the mounting hardware from your RTT, enable you to easily and securely clamp your Roof Top Tent onto our Planks.
Our Roof Top Tent KIT is designed to make installation of your Roof Top Tent super easy. The KIT includes (4) Roof Top Tent Brackets made from 5mm steel. These brackets, along with the mounting hardware from your RTT, enable you to easily and securely clamp your Roof Top Tent onto our Planks.
WK2 AIR SUSPENSION KIT
Pre-Order $32.99 USD
An installation KIT for the WK2 Off-Road Front Bumper and WK2 Hidden Winch Mount. It provides the required mounting bracket & hardware for the Quadra-Lift Air Suspension.
An installation KIT for the WK2 Off-Road Front Bumper and WK2 Hidden Winch Mount. It provides the required mounting bracket & hardware for the Quadra-Lift Air Suspension.
![[WK2 HIDDEN WINCH MOUNT ONLY]](http://cdn.shopify.com/s/files/1/1259/1747/products/WK2-Chassis-Mounts-Front-HERO-WEB_{width}x.jpg?v=1625206619)
![[WK2 HIDDEN WINCH MOUNT ONLY]](http://cdn.shopify.com/s/files/1/1259/1747/products/WK2-Chassis-Mounts-Front-HERO-WEB.jpg?v=1625206619)
WK2 CHASSIS MOUNTS (Front)
Pre-Order $126.99 USD
Chief Products WK2 Chassis Mounts (Front) provide a secure connection to the front of your WK2 (Jeep Grand Cherokee 2011-2020). Engineered to distribute forces to the chassis of your WK2 over multiple mounting points (for maximum strength and reliability). These Chassis Mounts play a critical role in the Engineer Certified Ratings (10,000lbs WLL) of our WK2 Off-Road Front Bumper and WK2 Hidden Winch Mount. They've been FEA tested, tested by independent 3rd parties and real-world tested in numerous scenarios; including off-axis recoveries, snatch block recoveries as well as independent crash testing for ADR Compliance. In other words, this is a product you can count on, when you're stuck in the middle of nowhere and you need it most.
Chief Products WK2 Chassis Mounts (Front) provide a secure connection to the front of your WK2 (Jeep Grand Cherokee 2011-2020). Engineered to distribute forces to the chassis of your WK2 over multiple mounting points (for maximum strength and reliability). These Chassis Mounts play a critical role in the Engineer Certified Ratings (10,000lbs WLL) of our WK2 Off-Road Front Bumper and WK2 Hidden Winch Mount. They've been FEA tested, tested by independent 3rd parties and real-world tested in numerous scenarios; including off-axis recoveries, snatch block recoveries as well as independent crash testing for ADR Compliance. In other words, this is a product you can count on, when you're stuck in the middle of nowhere and you need it most.
WK2 HIDDEN WINCH MOUNT (ACC Camera KIT)
Pre-Order $21.99 USD
An installation kit for the WK2 Hidden Winch Mount. It provides the required mounting bracket & hardware for the Adaptive Cruise Control Camera.
An installation kit for the WK2 Hidden Winch Mount. It provides the required mounting bracket & hardware for the Adaptive Cruise Control Camera.
WK2 HIDDEN WINCH MOUNT (OEM Tow Hooks KIT)
Pre-Order $59.99 USD
An installation kit for the WK2 Hidden Winch Mount. It provides the required mounting brackets & hardware for installation of OEM Tow Hooks with WK2 Hidden Winch Mount.
An installation kit for the WK2 Hidden Winch Mount. It provides the required mounting brackets & hardware for installation of OEM Tow Hooks with WK2 Hidden Winch Mount.
* Please note; this kit will not allow installation of OEM Tow Hooks with any other product. It only provides compatibility for the WK2 Hidden Winch Mount (when the WK2 Hidden Winch Mount is installed on its own).
WK2 HIDDEN WINCH MOUNT (WK2 Lower Front Guard KIT)
Pre-Order $44.99 USD
An installation kit for the WK2 Hidden Winch Mount. It provides a strengthening bracket for the WK2 Lower Front Guard. This bracket is recommended, but not required.
An installation kit for the WK2 Hidden Winch Mount. It provides a strengthening bracket for the WK2 Lower Front Guard. This bracket is recommended, but not required.
WK2 LOWER FRONT GUARD (Guard KIT)
Out of Stock $42.99 USD
An installation kit for the WK2 Lower Front Guard. It provides the appropriate centre guard for the WK2 Lower Front Guard centre section.
An installation kit for the WK2 Lower Front Guard. It provides the appropriate centre guard for the WK2 Lower Front Guard centre section.
WK2 LOWER FRONT GUARD (Upper Fascia KIT)
$114.99 USD
Chief Products WK2 Lower Front Guard (Upper Fascia KIT) delivers improved styling for all 2013-2021 Jeep Grand Cherokees with a WK2 Lower Front Guard installed. The 3-piece design ensures easy installation and a low installed weight. Best of all, we're able to deliver this improved styling without negatively effecting vehicle approach angle or any of the vehicle safety systems.
-
Chief Products WK2 Lower Front Guard (Upper Fascia KIT) delivers improved styling for all 2013-2021 Jeep Grand Cherokees with a WK2 Lower Front Guard installed. The 3-piece design ensures easy installation and a low installed weight. Best of all, we're able to deliver this improved styling without negatively effecting vehicle approach angle or any of the vehicle safety systems.
FEATURESLOW INSTALLED WEIGHTDURABLE POWDER COAT FINISH (Textured Black)E-COAT (Industry Leading Corrosion Protection)EASY INSTALLATION (Difficulty = 2/10)SPECIFICATIONS2.6kg INSTALLED WEIGHT +4.2° APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with Standard Guard) +2.2° APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with ACC Guard) +10.6° APPROACH ANGLE (Summit & SRT with Standard Guard) +8.6° APPROACH ANGLE (Summit & SRT with ACC Guard) * Approach Angle calculations represent improvement over stock (based on stock tyres, lower front fascia removed and air suspension in STD height). Raising the air suspension or installing larger tyres will increase the approach angle improvements.* REQUIRED *
WK2 LOWER FRONT GUARD (Upper Fascia KIT) cannot be installed without WK2 LOWER FRONT GUARD. The (2) products integrate seamlessly to provide robust protection for the front of your WK2. -
STYLEOur design team paid attention to every facet, so we could deliver a product that looks great from every angle and compliments the lines of your WK2 with a fully integrated appearance.MAXIMUM APPROACH ANGLESince our design doesn't extend past the front of your WK2, the maximum approach angle is retained.COMPATIBLE with ALL VEHICLE SYSTEMSFull compatibility with all vehicle systems (Air Bags, Blind Spot Monitoring, ParkSense Front & Rear Park Assist System, Adaptive Cruise Control, Full-Speed Forward Collision Warning with Active Braking, LaneSense Lane Departure Warning with Lane Keep Assist & Parallel and Perpendicular Park Assist).COMPATIBLE with FRONT RECOVERY POINTSCompatible with Chief Products WK2 Recovery Points & WK2 Recovery Hooks (engineer rated to 4,500kg) as well as OEM Tow Hooks (approximate engineer rating of 2,500kg).MAXIMUM APPROACH ANGLESince our design doesn't extend past the front of your WK2, the maximum approach angle is retained.VEHICLE INTEGRATED DESIGNEngineered from the ground up to integrate seamlessly with your WK2 (Jeep Grand Cherokee 2011-2020) and Chief Products WK2 Lower Front Guard. Providing compatibility with all vehicle safety systems, maximum approach angle, a design that doesn't impede critical air flow to the radiator core (critical for towing & off-road performance) and styling that closely matches the lines of your Jeep.LOW INSTALLED WEIGHTOnly 2.6kg when fully installed.EASY TO INSTALLWe provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can install this yourself.INDUSTRY LEADING CORROSION PROTECTIONWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. This industry-leading process (often only offered by OEMs) ensures full-coverage in hard to reach areas that are often missed by other coating processes. On top of the electrophoretic coating, we apply 80µm of an extremely durable and UV stable powder coat (advanced polyester thermosetting powder). This 2 layer approach ensures maximum corrosion protection for all steel parts.REAL WORLD TESTINGThere aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.TOP QUALITY FINISHING TOUCHESWe include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
-
Requires WK2 LOWER FRONT GUARD. Bolts to existing mounting points, no drilling or cutting required.Fitment confirmed on the following vehicles:2013 Jeep Grand Cherokee - All Models & Limited Editions2014 Jeep Grand Cherokee - All Models & Limited Editions2015 Jeep Grand Cherokee - All Models & Limited Editions2016 Jeep Grand Cherokee - All Models & Limited Editions2017 Jeep Grand Cherokee - All Models & Limited Editions2018 Jeep Grand Cherokee - All Models & Limited Editions2019 Jeep Grand Cherokee - All Models & Limited Editions2020 Jeep Grand Cherokee - All Models & Limited Editions2021 Jeep Grand Cherokee - All Models & Limited Editions* Fits USA & Export models.** Fitment on Summit & High Altitude (2013-2016) requires permanent removal of the lower front fascia.*** Fitment on Summit & High Altitude (2017-2021) and SRT (all model years) requires permanent removal of the lower front fascia and cutting of the plastic bumper.Product does NOT fit on the following vehicles:2011 Jeep Grand Cherokee - All Models & Limited Editions2012 Jeep Grand Cherokee - All Models & Limited Editions* Does not fit (and is not needed) on 2011 & 2012 Jeep Grand Cherokees (due to a different front bumper design).Fitment unconfirmed on the following vehicles:2018-2020 Jeep Grand Cherokee - TrackhawkFitment confirmed with the following products:INSTALLATION INSTRUCTIONS
WK2 NUDGE BAR (Light Bar Mount KIT)
$27.99 USD
Chief Products Light Bar Mount KIT provides an easy way to mount larger-deeper light bars on Chief Products WK2 Nudge Bar. Some light bars (with a lot of depth) need to be moved forward to avoid touching the grille, especially on 2013-2015 WK2s. Our Light Bar Mount KIT, moves the light bar forward while also providing extra mounting strength.
Chief Products Light Bar Mount KIT provides an easy way to mount larger-deeper light bars on Chief Products WK2 Nudge Bar. Some light bars (with a lot of depth) need to be moved forward to avoid touching the grille, especially on 2013-2015 WK2s. Our Light Bar Mount KIT, moves the light bar forward while also providing extra mounting strength.
| 1 | Light Bar Mount Bracket - LH (with Zinc Coated Press Studs) |
| 1 | Light Bar Mount Bracket - RH (with Zinc Coated Press Studs) |
| 2 | M6 Wedge-Lock Extended Washers (Zinc Flake Coating) |
| 2 | M8 Wedge-Lock Extended Washers (Zinc Flake Coating) |
| 2 | M6 (CL8) Flanged Nut (Zinc Plated) |
| 2 | M8 (CL8) Flanged Nut (Zinc Plated) |
WK2 NUDGE BAR (Mounting Arms Upgrade KIT)
$179.99 USD
Chief Products WK2 Nudge Bar (Mounting Arms Upgrade KIT) allows customers with an older WK2 Nudge Bar (purchased before October 2019) to upgrade to the latest Mounting Arms. These new Mounting Arms provide more adjustment, allowing customers to mount their WK2 Nudge Bar closer to (or farther from) the vehicle. Mounting closer to the vehicle can be helpful when having troubles with the parking sensor system. Mounting farther from the vehicle can be helpful when a customer needs more space to mount larger off-road lights.
Chief Products WK2 Nudge Bar (Mounting Arms Upgrade KIT) allows customers with an older WK2 Nudge Bar (purchased before October 2019) to upgrade to the latest Mounting Arms. These new Mounting Arms provide more adjustment, allowing customers to mount their WK2 Nudge Bar closer to (or farther from) the vehicle. Mounting closer to the vehicle can be helpful when having troubles with the parking sensor system. Mounting farther from the vehicle can be helpful when a customer needs more space to mount larger off-road lights.
| 2 | Chassis Mounting Arms |
| 4 | Chassis Mounting Plates |
| 2 | M10 x 60mm Heavy Duty Washers (Black EDP Coating) |
| 1 | Installation Instructions |
WK2 Nudge Bar [BAR ONLY]
$278.99 USD
Chief Products WK2 Nudge Bar [BAR ONLY] provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel and it includes a slotted accessory mounting tab that runs the entire length of the bar, making it extremely easy to mount your accessories. We provide (2) versions, so you can choose the one that best fits the style of your WK2.
Chief Products WK2 Nudge Bar [BAR ONLY] provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel and it includes a slotted accessory mounting tab that runs the entire length of the bar, making it extremely easy to mount your accessories. We provide (2) versions, so you can choose the one that best fits the style of your WK2.
| 63.5mm | BAR DIAMETER |
| 629mm | MOUNTING TAB TOTAL LENGTH (24.76 inches) |
| 599mm | MOUNTING TAB SLOT LENGTH (23.58 inches) |
| 123 | BRINELL HARDNESS (Excellent Scratch Resistance) |
| 1 | Bar Assembly (304 Stainless Steel) |
| 1 | Installation Instructions |
WK2 OFF-ROAD FRONT BUMPER (ACC KIT)
Pre-Order $83.99 USD
An installation kit for the WK2 Off-Road Front Bumper. It provides the required mounting bracketry & hardware for the Adaptive Cruise Control Camera.
An installation kit for the WK2 Off-Road Front Bumper. It provides the required mounting bracketry & hardware for the Adaptive Cruise Control Camera.
| 1.30kg | INSTALLED WEIGHT (No Winch) |
| 0.70kg | INSTALLED WEIGHT (Winch) |
WK2 OFF-ROAD FRONT BUMPER (Advanced Parking Sensor KIT)
Pre-Order $241.99 USD
WK2 OFF-ROAD FRONT BUMPER (Apex Grille)
Pre-Order $421.99 USD
WK2 OFF-ROAD FRONT BUMPER (Fusion Fairlead)
$162.99 USD
WK2 OFF-ROAD FRONT BUMPER (Mach II Aero-Bar)
Pre-Order $279.99 USD
WK2 OFF-ROAD FRONT BUMPER (Nomad Grille)
$167.99 USD
WK2 OFF-ROAD FRONT BUMPER (Number Plate Mount KIT)
$109.99 USD
WK2 REAR BUMPER GUARD (Corner Protection KIT)
$490.99 USD
Chief Products WK2 Rear Bumper Guard (Corner Protection KIT) is engineered to bolt-on to the WK2 Rear Bumper Guard and extend protection to the vulnerable rear corners of your WK2. The clean simple design hugs the lines of the rear bumper to provide maximum protection for the rear of your WK2 without ruining your Jeep’s good looks.
-
Chief Products WK2 Rear Bumper Guard (Corner Protection KIT) is engineered to bolt-on to the WK2 Rear Bumper Guard and extend protection to the vulnerable rear corners of your WK2. The clean simple design hugs the lines of the rear bumper to provide maximum protection for the rear of your WK2 without ruining your Jeep’s good looks.
To ensure the WK2 Rear Bumper Guard (Corner Protection KIT) is a top-notch product you can trust, we performed (12) months of real-world testing. Our real-world testing included 1000s of kilometers of on-road and off-road testing, including many extremely difficult off-road challenges. Those epxeriences and passionate attention-to-detail led to numerous refinements that increased ease-of-installation, lowered weight, maximised performance and increased strength.
FEATURESHIGH-STRENGTH STEEL (High Strength to Weight Ratio)DURABLE POWDER COAT FINISH (Textured Black)E-COAT (Industry Leading Corrosion Protection)RECESSED MOUNTING BOLTS (Smooth Undercarriage)EASY INSTALLATION (Difficulty = 5/10)SPECIFICATIONS10.75kg INSTALLED WEIGHT 23.9° DEPARTURE ANGLE (Standard Suspension) 25.9° DEPARTURE ANGLE (Air Suspension OR2) INCLUDES2 Corner Guards 2 Main Mounting Brackets 2 Corner Mounting Brackets 2 Exhaust Support Brackets 4 M10 x 25mm High Tensile (10.9) Bolts (Zinc Plated) 12 M8 x 25mm High Tensile (10.9) Bolts (Zinc Plated) 4 M8 x 16mm High Tensile (10.9) Bolts (Zinc Plated) 4 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 16 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 1 4g pouch Anti-Seize 1 Installation Instructions * REQURIED *
WK2 Rear Bumper Guard (Corner Protection KIT) cannot be installed without WK2 Rear Bumper Guard. The (2) products integrate seamlessly to provide robust protection for the rear of your WK2.
* ATTENTION *
This product does not fit 3.0L diesel models with a DEF Tank (North American 3.0L Models). -
High Strength Off-Road ProtectionEngineered and fully tested to provide off-road protection for the vulnerable rear corners of your WK2. Accomplished via high-strength steel braces and boxed sections to provide maximum strength.
Contoured To FitWe designed the WK2 Rear Bumper Guard to hug the lines of the rear bumper, so it provides off-road protection while remaining unobtrusive.
Perfect IntegrationEngineered to integrate seamlessly with the WK2 Rear Bumper Guard and provide robust off-road protection for the rear of your WK2.
Compatible With Rear Parking SensorsUnlike bulky off-road rear bumpers, the WK2 Rear Bumper Guard is fully compatible with the rear parking sensors and requires no alteration to the rear parking sensor system.
Compatible With Jeep/Mopar TowbarsDesigned to integrate seamlessly with Jeep-Mopar Towbars (USA & Australian models).
Recessed Mounting BoltsEngineered to deliver a smooth undercarriage and keep bolt heads protected off-road.
Industry Leading Corrosion ProtectionWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.
Real World TestingThere aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.
Top Quality Finishing TouchesWe include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great. -
Requires WK2 Rear Bumper Guard. Bolts into existing mounting points in the frame, no drilling or cutting of OEM parts needed.WK2 Rear Bumper Guard (Corner Protection Kit) fits the following vehicles:2011 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2012 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2013 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2014 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2015 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2016 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2017 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2018 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2019 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2020 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2021 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)Does NOT fit on the following vehicles:2012-2019 Jeep Grand Cherokee - 3.0L Diesel with DEF Tank (USA Models ONLY)2014-2019 Jeep Grand Cherokee - Summit & High Altitude (including all models with same lower rear bumper/fascia)2012-2019 Jeep Grand Cherokee - SRT (including all models with same lower rear bumper/fascia)Fitment confirmed with the following products:MagnaFlow Stainless MF Series Cat-Back Performance ExhaustINSTALLATION INSTRUCTIONS
WK2 REAR BUMPER GUARD (Corner Protection KIT) (Single Exhaust KIT)
$44.99 USD
An installation kit for the WK2 Rear Bumper Guard (Corner Protection KIT). It provides the required exhaust mounting bracket & hardware for single exhaust WK2s.
An installation kit for the WK2 Rear Bumper Guard (Corner Protection KIT). It provides the required exhaust mounting bracket & hardware for single exhaust WK2s.
WK2 ROCK RAILS (Tread KIT)
$269.99 USD
Chief Products Tread KIT has been specifically designed as a way to add extra styling to the WK2 Rock Rails (NO TREAD). The tread kit utilises a dual layer design that increases step traction and provides maximum visual impact. The lower plate is Aluminium with Silver Akzo powder coat, providing a highly corrosion resistant layer that looks great. The upper plate is made from high-strength steel with E-Coat corrosion protection and heavy-duty textured black powder coating. Together they provide a great looking and very durable step tread for the WK2 Rock Rails.
Chief Products Tread KIT has been specifically designed as a way to add extra styling to the WK2 Rock Rails (NO TREAD). The tread kit utilises a dual layer design that increases step traction and provides maximum visual impact. The lower plate is Aluminium with Silver Akzo powder coat, providing a highly corrosion resistant layer that looks great. The upper plate is made from high-strength steel with E-Coat corrosion protection and heavy-duty textured black powder coating. Together they provide a great looking and very durable step tread for the WK2 Rock Rails.
WK2 ROOF RACK (Hidden Air Dam)
Out of Stock $59.99 USD
Chief Products WK2 Roof Rack (Hidden Air Dam) is engineered to significantly reduce wind noise (a common problem in the roof rack industry) without ruining your Jeep's good looks. Weighing only 145 grams, it's mounted out-of-sight underneath your roof rack, and it reduces wind noise by restricting the amount of air that flows through the confined space under your rack.
Chief Products WK2 Roof Rack (Hidden Air Dam) is engineered to significantly reduce wind noise (a common problem in the roof rack industry) without ruining your Jeep's good looks. Weighing only 145 grams, it's mounted out-of-sight underneath your roof rack, and it reduces wind noise by restricting the amount of air that flows through the confined space under your rack.
To accomplish this goal, many roof rack companies offer a large wind fairing (often at an extra cost) that must be mounted to the front of their roof rack. Our engineers achieve the same (or better) performance from a product that is completely hidden. Meaning it won't change the looks of your Jeep, it won't inhibit how you use your rack, and it won't obstruct the view out of your sunroof (if you have one).
Best of all, we include our WK2 Roof Rack (Hidden Air Dam) with every WK2 Roof Rack we sell.
| 1040mm | OVERALL WIDTH (between Mounting Rails) |
| 0.58kg | INSTALLED WEIGHT |
WK2 ROOF RACK (Platform Frame KIT)
$330.99 USD
Our WK2 Roof Rack (Platform Frame KIT) is designed to provide your roof rack with a smooth outside border that looks great, adds strength and delivers the best aerodynamics possible. The corners of our Platform Frame KIT are cast from a proprietary Aircraft-Grade Aluminium Alloy and they fit tightly together with each of the Frame Rails. The Frame Rails utilise the same Aircraft-Grade Aluminium Alloy along with an advanced Extrusion Manufacturing Process, to deliver an end product that is extremely light and strong.
Our WK2 Roof Rack (Platform Frame KIT) is designed to provide your roof rack with a smooth outside border that looks great, adds strength and delivers the best aerodynamics possible. The corners of our Platform Frame KIT are cast from a proprietary Aircraft-Grade Aluminium Alloy and they fit tightly together with each of the Frame Rails. The Frame Rails utilise the same Aircraft-Grade Aluminium Alloy along with an advanced Extrusion Manufacturing Process, to deliver an end product that is extremely light and strong.
| 1490mm | PLATFORM FRAME LENGTH (fully assembled) |
| 1246mm | PLATFORM FRAME WIDTH (fully assembled) |
| 28.34mm | PLATFORM FRAME THICKNESS (fully assembled) |
| 6.03kg | INSTALLED WEIGHT --> Platform Frame KIT |
WK2 WINCH CRADLE
Pre-Order $317.99 USD
Chief Products WK2 Winch Cradle provides a high-strength place to mount your winch. It includes critical cooling and drainage holes to ensure your winch stays cool and muddy water drains away. As an added bonus, we include an access hole for users that want to 'clock' their winch. Best of all, we provide (2) versions designed to integrate perfectly with the model year of your WK2.
Chief Products WK2 Winch Cradle provides a high-strength place to mount your winch. It includes critical cooling and drainage holes to ensure your winch stays cool and muddy water drains away. As an added bonus, we include an access hole for users that want to 'clock' their winch. Best of all, we provide (2) versions designed to integrate perfectly with the model year of your WK2.
