Bolt Head Protectors (Slotted)
$12.99 USD $16.49 USD
Chief Products Bolt Head Protectors (Slotted) are specifically designed to integrate with our product line. They provide a simple and effective way to protect exposed bolt heads underneath your WK2. The angled sides protect the bolt head from rocks and other off-road obstacles that would normally cause damage. The slotted design keys into the product and locks it into place when the bolt is tightened, eliminating any chance the bolt head protector can spin or move when hit off-road.
-
Chief Products Bolt Head Protectors (Slotted) are specifically designed to integrate with our product line. They provide a simple and effective way to protect exposed bolt heads underneath your WK2. The angled sides protect the bolt head from rocks and other off-road obstacles that would normally cause damage. The slotted design keys into the product and locks it into place when the bolt is tightened, eliminating any chance the bolt head protector can spin or move when hit off-road. Each one is manufactured out of 6061 Aluminium to protect against corrosion and the harsh life they're sure to encounter under your 4x4. Best of all, they install easily like a normal washer.
PLEASE NOTE - This product is designed to work exclusively with our product line. For a Bolt Head Protector that can be used anywhere try our - Bolt Head Protector (Standard).
FEATURES6061 Aluminium (Excellent Corrosion Resistance)Easy Installation (Difficulty = 1/10)SIZESM6 - Fits M6 BoltsM8 - Fits M8 Bolts
Bolt Head Protectors (Standard)
$10.99 USD
Chief Products Bolt Head Protectors (Standard) are a simple and effective way to protect exposed bolt heads underneath your 4x4. The angled sides protect the bolt head from rocks and other off-road obstacles that would normally cause damage. The extra width and thickness of the design makes them an extremely stout washer (that can distribute clamping force over a greater area).
-
Chief Products Bolt Head Protectors (Standard) are a simple and effective way to protect exposed bolt heads underneath your 4x4. The angled sides protect the bolt head from rocks and other off-road obstacles that would normally cause damage. The extra width and thickness of the design makes them an extremely stout washer (that can distribute clamping force over a greater area). Each one is manufactured out of 6061 Aluminium to protect against corrosion and the harsh life they're sure to encounter under your 4x4. Best of all, they install easily like a normal washer.
FEATURES6061 Aluminium (Excellent Corrosion Resistance)Easy Installation (Difficulty = 1/10)SIZESM6 (38mm) - Fits M6 Bolts (38mm outside diameter)M8 (38mm) - Fits M8 Bolts (38mm outside diameter)
![[MOUNTING BRACKETS ONLY]](http://cdn.shopify.com/s/files/1/1259/1747/products/WK2-Hidden-Winch-Mount-Brackets-HERO-screen_1a68a13d-f146-403c-846c-afab77c61966.jpg?v=1544654621)
WK2 Hidden Winch Mount
$349.99 USD
Chief Products WK2 Hidden Winch Mount provides a high-strength place to mount your winch without ruining your Jeep's good looks. We've engineered a winch mounting system that can remain completely hidden while still being 100% compatible with the all of your Jeep's safety systems, (adaptive cruise control, forward collision warning, parking sensor systems, etc.). It delivers numerous industry leading features - including an engineer certified 10,000lb max rating, E-Coat Corrosion Protection and a very low 12.85kg install weight. By positioning the winch between the chassis structure (lower than our competitors) we're able to provide significantly improved cooling, better off-axis strength, as well as more space for larger winches. Best of all, we spent (12) months performing rigorous real world testing to ensure you can rely on our winch mounting system when you need it most.
-
Chief Products WK2 Hidden Winch Mount provides a high-strength place to mount your winch without ruining your Jeep's good looks. We've engineered a winch mounting system that can remain completely hidden while still being 100% compatible with the all of your Jeep's safety systems, (adaptive cruise control, forward collision warning, parking sensor systems, etc.). It delivers numerous industry leading features - including an engineer certified 10,000lb max rating, E-Coat Corrosion Protection and a very low 12.85kg install weight. By positioning the winch between the chassis structure (lower than our competitors) we're able to provide significantly improved cooling, better off-axis strength, as well as more space for larger winches. Best of all, we spent (12) months performing rigorous real world testing to ensure you can rely on our winch mounting system when you need it most.
FEATURESHigh-Strength 350 Grade SteelE-Coat (Industry Leading Corrosion Protection)Durable Powder Coat Finish (Satin Black)Drainage SlotsEasy Installation (Difficulty = 4/10)SPECIFICATIONS10,000lbs Max Rating [Engineer Certified]Fully Installed Weight = 12.85kg (approximate without winch)Approach Angle = Same As StockINCLUDES1 Winch Cradle 2 Cradle-Frame Mounts 2 Chassis Support Brackets 2 Chassis Mounting Plates 2 Bonnet Supports 6 M12 x 35mm High Tensile (10.9) Bolts (Zinc Plated) 4 M10 x 40mm High Tensile (10.9) Bolts (Zinc Plated) 4 M8 x 100mm (10.9) Bolts (Zinc Plated) 4 M8 x 25mm (10.9) Bolts (Zinc Plated) 2 M6 x 25mm (10.9) Bolts (Zinc Plated) 2 M6 x 216mm (10.9) Bolts (Zinc Plated) 6 M12 Wedge-Lock Extended Washers (Zinc Flake Coating) 4 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 8 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 4 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 1 4g pouch Anti-Seize Installation Instructions OPTIONS2011-2015 (HYDRAULIC STEER)All WK2s before 2016 with hydraulic steering.2016+ (ELECTRIC STEER)All WK2s after 2015 with electric steering.[MOUNTING BRACKETS ONLY]Only the Mounting Brackets, no cradle included.EXTRAS -
High-StrengthMade from 3mm, 5mm, 6mm & 8mm High-Strength 350 Grade Steel. Mounted to the chassis in multiple locations to ensure recovery forces are evenly distributed and don't overload the chassis mounting points. Through FEA computer modelling and 12 months of real world testing we've delivered a high-strength winch mounting system that you can rely on when you need it most.
Maintain OEM AppearanceThe WK2 Hidden Winch Mount can be installed behind your bumper and lower front fascia, maintaining the great looks of your Jeep Grand Cherokee. Then if you want to, you can easily remove the lower front fascia when heading off-road.
Low Installed WeightOnly 12.85kg when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) - 90kgs (steel).
Lower Winch PositionOur lower winch position provides numerous benefits. Ability to install taller winches, better cooling to the radiator, doesn’t interfere with license plate mounting, as well as positioning the winch directly between the frame rails for maximum strength.
Maximum Approach AngleSince our design doesn't extend past the front of your WK2, the maximum approach angle is retained.
Compatible With Adaptive Cruise ControlThrough careful engineering & testing we've delivered a winch mount that is compatible with the adaptive cruise control system on all WK2 models.
Compatible With Parking SensorsThrough careful engineering & testing we've delivered a winch mount that is compatible with parking sensors on all WK2 models.
Compatible With Our Entire Product LineAlready own our WK2 Lower Front Guard, WK2 Sump Protection Plate, WK2 Recovery Hooks, WK2 Recovery Points or WK2 Nudge Bar? We’ve designed the WK2 Hidden Winch Mount to easily work with all of our products.
Compatible With Excellent Front Recovery OptionsCan be installed with OEM Tow Hooks or Chief Products WK2 Recovery Hooks & WK2 Recovery Points, (which are engineer rated to 4,500kg [1.5 GVM]).
Industry Leading Corrosion ProtectionWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process.
Real World TestingThere aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.
Top Quality Finishing TouchesWe include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great. -
Bolts into existing mounting points in the frame, no drilling or cutting required. Installation of lower front fascia requires cutting a hole for the winch fairlead.WK2 Hidden Winch Mount fits the following vehicles:2011 Jeep Grand Cherokee - Laredo, Limited & Overland2012 Jeep Grand Cherokee - Laredo, Limited, Overland & Altitude2013 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & Trailhawk2014 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude & Blackhawk2015 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, Blackhawk & High Altitude2016 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, High Altitude & 75th Anniversary Edition2017 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude & Trailhawk2018 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, High Altitude & Trailhawk2019 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, High Altitude & Trailhawk
* Fits USA & Export models.** Fitment on all Summit & High Altitude models requires permanent removal of the lower front fascia. The lower front fascia will not reinstall on the vehicle without modification.Fitment unconfirmed on the following vehicles:2012-2018 Jeep Grand Cherokee - SRTFitment confirmed with the following products:Warn Zeon 10-S PlatinumSmittybilt Gen2 X20 Comp (10,000lb)** OEM Tow Hooks (part# 82212095)
* Fitment with Australian versions of the WK2 Lower Front Guard (purchased before March 2017), requires (2) metal tabs be cut/removed from the centre section of the WK2 Lower Front Guard. This modification is not required for USA model WK2 Lower Front Guards or any WK2 Lower Front Guards purchased after March 2017.
** You can install OEM Tow Hooks OR the WK2 Lower Front Guard with the WK2 Hidden Winch Mount. You cannot install OEM Tow Hooks AND the WK2 Lower Front Guard with the WK2 Hidden Winch Mount. For more information read our Support Article, (here).Does NOT fit with the following products:Jeep Australia Tow Hook (part# CH8220WKRH or AUSWK14HOOK)INSTALLATION INSTRUCTIONS -
![WK2 Lower Front Guard [NO CENTRE GUARD]](http://cdn.shopify.com/s/files/1/1259/1747/products/WK2-Lower-Front-Guard-NO-Centre-Guard-screen.jpg?v=1539136446)
WK2 Lower Front Guard
Out of Stock $469.99 USD $549.98 USD
Chief Products WK2 Lower Front Guard is engineered to protect the critical components at the lower front of your WK2 without ruining your Jeep's good looks. Weighing only 15kg (approx.) when fully installed, it provides off-road protection for the Lower Radiator Core, ACC Camera, Windshield Washer Bottle and Air Suspension Controller. It features a centre section made from 5mm high-strength steel for unparalleled strength, while still providing critical airflow to the lower radiator core. Bolted directly to the sub-frame it provides the very best approach angle possible, and our Slotted Bolt Head Protectors protect the front mounting bolts from off-road damage. Best of all, we've designed the WK2 Lower Front Guard so it installs behind the removable lower front fascia, providing full protection off-road while still allowing you to maintain a factory appearance on-road.
-
Chief Products WK2 Lower Front Guard is engineered to protect the critical components at the lower front of your WK2 without ruining your Jeep's good looks. Weighing only 15kg (approx.) when fully installed, it provides off-road protection for the Lower Radiator Core, ACC Camera, Windshield Washer Bottle and Air Suspension Controller. It features a centre section made from 5mm high-strength steel for unparalleled strength, while still providing critical airflow to the lower radiator core. Bolted directly to the sub-frame it provides the very best approach angle possible, and our Slotted Bolt Head Protectors protect the front mounting bolts from off-road damage. Best of all, we've designed the WK2 Lower Front Guard so it installs behind the removable lower front fascia, providing full protection off-road while still allowing you to maintain a factory appearance on-road.
We've created a modular system of protection products for the WK2, this means our WK2 Lower Front Guard will integrate perfectly with all of our other products - WK2 Hidden Winch Mount, WK2 Sump Protection Plate, WK2 Nudge Bar, WK2 Recovery Hook and WK2 Recovery Point.
FEATURESHigh-Strength SteelE-Coat (Industry Leading Corrosion Resistance)Durable Powder Coat Finish (Textured Black)Drainage SlotsAirflow SlotsEasy Installation (Difficulty = 4/10)SPECIFICATIONSStandard Guard = 14.90kg (Including Mounting Hardware)ACC Guard = 15.20kg (Including Mounting Hardware)Approach Angle = Same As StockINCLUDES1 Centre Section (5mm High-Strength Steel) 2 Chassis Mounting Brackets 2 Corner Mounting Brackets 2 Corner Guards 1 Standard Guard or ACC Guard 1 Air Dam Reinforcement Bracket 4 M6 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 2 M8 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 4 M10 x 20mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 100mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 30mm High Tensile (8.8) Bolts (Zinc Plated) 14 M8 x 25mm High Tensile (8.8) Bolts (Black Zinc Plated) 4 M6 x 40mm High Tensile (10.9) Bolts (Zinc Plated) 4 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 18 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 4 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 x 8mm Bushings (6061 Aluminium) 4 M6 Nutserts (Stainless Steel) 1 4g pouch Anti-Seize Installation Instructions OPTIONSStandard GuardFor WK2s without ACC (Adaptive Cruise Control).ACC GuardFor WK2s with ACC (Adaptive Cruise Control).[NO CENTRE GUARD]Base unit with no Centre Guard. -
Off-Road ProtectionOff-road protection for the Lower Radiator Core, ACC Camera, Windshield Washer Bottle and Air Suspension Controller. Accomplished via high-strength 350 grade steel that is 5mm thick on the main centre section.
Maintain OEM AppearanceThe lower front fascia can be easily installed over the WK2 Lower Front Guard, maintaining the great looks of the Jeep Grand Cherokee while driving around town. Then when you're heading off-road, you can easily remove the lower front fascia via (5) 1/4 turn fasteners to reveal the WK2 Lower Front Guard.
Low Installed WeightOnly 15kg (approx.) when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) - 90kgs (steel).
Maximum Approach AngleSince our design doesn't extend past the front of your WK2, the maximum approach angle is retained.
Compatible With Excellent Front Recovery OptionsCan be installed with OEM Tow Hooks (if available for your WK2) or Chief Products WK2 Recovery Hooks & WK2 Recovery Points, (which can be installed on driver & passenger sides and are engineer rated to 4,500kg [1.5 GVM]).
Easily & Inexpensively RepairedBecause we designed the WK2 Lower Front Guard as a set of components, if you damage one part, you can easily and cost effectively replace just that part.
Low CostSignificantly less expensive than a Bull Bar, especially when you include shipping and installation costs.
Easy To InstallWe provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can install this yourself.
Industry Leading Corrosion ProtectionWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process.
Bolt Head ProtectionOur Bolt Head Protectors are engineered to keep critical bolt heads protected from off-road obstacles. They feature a slotted design that keys directly into the product with no possibility of spinning or moving when hit off-road.
Real World TestingThere aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.
Top Quality Finishing TouchesWe include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great. -
Bolts into existing mounting points in the frame, no drilling or cutting needed.WK2 Lower Front Guard fits the following vehicles:2011 Jeep Grand Cherokee - Laredo, Limited, Overland & SRT2012 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & SRT2013 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude, Trailhawk & SRT2014 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, Blackhawk & SRT2015 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, Blackhawk, High Altitude & SRT2016 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, High Altitude, 75th Anniversary Edition & SRT2017 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, Trailhawk & SRT2018 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, High Altitude, Trailhawk & SRT2019 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, High Altitude, Trailhawk & SRT
* Fits USA & Export models.** Fitment on all Summit & High Altitude models requires permanent removal of the lower front fascia.*** Fitment on all SRT models required cutting of the lower front fascia.Fitment unconfirmed on the following vehicles:2012-2019 Jeep Grand Cherokee - SRTFitment confirmed with the following products:Uneek WK2 Grand Cherokee Bash PlateRocky Road Bumper Kits & Winch Mounting Kits (2011 - 2018 WK2s)OEM Tow Hooks (part# 82212095)Does NOT fit with the following products:Jeep Australia Tow Hook (part# CH8220WKRH or AUSWK14HOOK)Jeep Belly Pan (part# 68089029AC)INSTALLATION INSTRUCTIONS -
![WK2 Nudge Bar [MOUNTING ARMS ONLY]](http://cdn.shopify.com/s/files/1/1259/1747/products/WK2-Nudge-Bar-VARIANT-Mounting-Arms-Only-screen.jpg?v=1573086131)
WK2 Nudge Bar
$219.99 USD $729.99 USD
Chief Products WK2 Nudge Bar provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel and features a specially engineered mounting system that provides maximum strength without reducing your approach angle. It includes a slotted accessory mounting tab that runs the entire length of the bar, making it extremely easy to mount your accessories. Best of all, we've created a bar that is compatible with the all of your Jeep's safety systems - air bags, adaptive cruise control, forward collision warning, lane departure warning and parking sensors*.
-
Chief Products WK2 Nudge Bar provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel and features a specially engineered mounting system that provides maximum strength without reducing your approach angle. It includes a slotted accessory mounting tab that runs the entire length of the bar, making it extremely easy to mount your accessories. Best of all, we've created a bar that is compatible with the all of your Jeep's safety systems - air bags, adaptive cruise control, forward collision warning, lane departure warning and parking sensors*.
FEATURES304 Stainless Steel (Excellent Corrosion & Scratch Resistance)Bar Assembly = Mirror Polished or Durable Powder Coat FinishMounting Arms = E-Coat + Durable Powder Coat FinishEasy Installation (Difficulty = 2/10)SPECIFICATIONS10.6kg Fully Installed Weight (Including Mounting Hardware) 63.5mm Bar Diameter 629mm Mounting Tab Total Length (24.76 inches) 599mm Mounting Tab Slot Length (23.58 inches) 123 Brinell Hardness (Excellent Scratch Resistance) 29.4˚ Approach Angle (lower front fascia removed + standard suspension) 33.3˚ Approach Angle (lower front fascia removed + air suspension OR2) Same As Stock Approach Angle (lower front fascia installed) INCLUDES1 Bar Assembly (304 Stainless Steel) 2 Chassis Mounting Arms 4 Chassis Mounting Plates 2 M10 x 60mm Heavy Duty Washers (Black EDP Coating) 4 M10 x 40mm High Tensile (10.9) Bolts (Black Zinc Plated) 4 M10 x 65mm High Tensile (10.9) Bolts (Black Zinc Plated) 8 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M10 Nuts (Zinc Plated) 1 4g pouch Anti-Seize Installation Instructions OPTIONSMORE INFO*Parking Sensor Compatibility - We provide 95% compatibility (read more). -
Excellent Approach AngleSince our design doesn't extend below the mounting brackets, the approach angle (an important aspect off-road) is significantly better than other nudge bars.
Parking Sensor CompatibilityThrough careful engineering & testing we've delivered a nudge bar that is 95% compatible with the parking sensors on all WK2 models.
High StrengthOur innovative mounting system uses steel tabs on the bottom of each bar to lock the bar securely to (2) 20mm high-strength steel mounting arms. This high-strength design means there will be minimal vibrations for your accessories when you're off-road.
Highly Scratch ResistantBy using 304 Stainless Steel (which has a higher hardness rating than Aluminium) we're able to provide a nudge bar with much better scratch & wear resistance.
Low Installed WeightOnly 10.6kg when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) - 90kgs (steel).
Accommodates Numerous Lighting & Accessory OptionsThe accessory mounting tab is slotted across its entire length, allowing you to install lights or accessories however you choose.
Contoured To FitThe accessory mounting tab is contoured to match the curvature of the WK2 grille, so it integrates perfectly with the front of the WK2.
Compatible With Front Recovery PointsCan be installed with Chief Products WK2 Recovery Hooks & WK2 Recovery Points, (which can be installed on driver & passenger sides and are engineer rated to 4,500kg). Due to mounting restrictions, many nudge bars don't allow you to install any front recovery points with their bar.
Compatible With Adaptive Cruise ControlThrough careful engineering & testing we've delivered a nudge bar that is compatible with the adaptive cruise control system on all WK2 models.
Guards Against Damage During RecoveryThe mounting brackets are designed to stop recovery straps or bow shackles from hitting the bar during an off-road recovery.
Easy To InstallWe provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can easily install this yourself. We've even designed the mounting brackets so they swivel slightly during installation to make things as easy as possible.
Industry Leading Corrosion ProtectionWe utilise E-Coat (Electrophoretic Coating) on the mounting arms and bracketry to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process.
Mirror Polish That LastsOur mirror polished 304 Stainless Steel keeps looking good for longer. Polished aluminium bars tend to develop a white haze from oxidation that causes them to lose their lustre.
Top Quality Finishing TouchesWe include all the details that matter. Electrophoretic Coating on all mounting plates. High tensile bolts for maximum strength. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great. -
Bolts into existing mounting points in the frame, no drilling or cutting needed.WK2 Nudge Bar fits the following vehicles:2011 Jeep Grand Cherokee - Laredo, Limited & Overland2012 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT & Altitude2013 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude, SRT & Trailhawk2014 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, SRT & Blackhawk2015 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, Blackhawk, SRT & High Altitude2016 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, High Altitude, SRT & 75th Anniversary Edition2017 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, SRT & Trailhawk2018 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, High Altitude, SRT & Trailhawk2019 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, High Altitude, SRT & Trailhawk
* Fits USA & Export models.** Fitment on all Summit, High Altitude, SRT & Australian 2016+ models requires cutting (2) holes in the grille area of the lower front fascia for the mounting brackets. Instructions are not currently provided for this modification.Fitment confirmed with the following products:Does NOT fit with the following products:OEM Tow Hooks (part# 82212095)Jeep Australia Tow Hook (part# CH8220WKRH or AUSWK14HOOK)INSTALLATION INSTRUCTIONS
WK2 Rear Bumper Guard
$349.99 USD $419.99 USD
Chief Products WK2 Rear Bumper Guard is engineered to provide protection for the rear of your WK2 without ruining your Jeep's good looks. The clean simple design hugs the lines of the rear bumper to provide protection while remaining unobtrusive. It's made from high strength 3mm, 4mm, 5mm & 8mm steel with boxed sections to provide maximum strength. Best of all, through careful engineering and testing we've created a rear protection system that looks great and is 100% compatible with Jeep/Mopar towbars.
-
Chief Products WK2 Rear Bumper Guard is engineered to provide protection for the rear of your WK2 without ruining your Jeep's good looks. The clean simple design hugs the lines of the rear bumper to provide protection while remaining unobtrusive. It's made from high strength 3mm, 4mm, 5mm & 8mm steel with boxed sections to provide maximum strength. Best of all, through careful engineering and testing we've created a rear protection system that looks great and is 100% compatible with Jeep/Mopar towbars.
FEATURESHigh-Strength SteelE-Coat (Industry Leading Corrosion Resistance)Durable Powder Coat Finish (Textured Black)Drainage SlotsRecessed Mounting BoltsEasy Installation (Difficulty = 3/10)SPECIFICATIONS17.25kg Open Centre Guard (Including Mounting Hardware) 18.85kg Full Centre Guard (Including Mounting Hardware) 24.8˚ Departure Angle (Standard Suspension) 26.5˚ Departure Angle (Air Suspension OR2) INCLUDES1 Centre Guard (Open or Full) 2 Chassis Mounting Brackets 4 M12 x 30mm High Tensile (10.9) Bolts (Zinc Plated) 4 M12 Wedge-Lock Extended Washers (Zinc Flake Coating) 4 M16 Wedge-Lock Extended Washers (Zinc Flake Coating) 1 4g pouch Anti-Seize Installation Instructions OPTIONS* RECOMMENDED *
For maximum protection we recommend combining the WK2 Rear Bumper Guard with the WK2 Rear Bumper Guard (Corner Protection Kit). The (2) products integrate seamlessly to provide robust protection for the rear of your WK2.
* ATTENTION *
This product does not fit 3.0L diesel models with a DEF Tank (USA 3.0L Models). -
High Strength Off-Road ProtectionEngineered and fully tested to provide off-road protection for the rear of your WK2. Accomplished via high-strength 3mm, 5mm & 8mm steel with boxed sections to provide maximum strength.
Contoured To FitWe designed the WK2 Rear Bumper Guard to hug the lines of the rear bumper, so it provides off-road protection while remaining unobtrusive.
Perfect IntegrationEngineered to integrate seamlessly with the WK2 Rear Bumper Guard (Corner Protection Kit) and provide robust off-road protection for the rear of your WK2.
Compatible With Rear Parking SensorsUnlike bulky off-road rear bumpers, the WK2 Rear Bumper Guard is fully compatible with the rear parking sensors and requires no alteration to the rear parking sensor system.
Compatible With Jeep/Mopar TowbarsDesigned to integrate seamlessly with Jeep/Mopar Towbars (USA & Australian models).
Recessed Mounting BoltsEngineered to keep bolt heads protected off-road.
Easy To InstallWe provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can easily install this yourself.
Industry Leading Corrosion ProtectionWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process.
Real World TestingThere aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.
Top Quality Finishing TouchesWe include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great. -
Bolts into existing mounting points in the frame, no drilling or cutting needed.WK2 Rear Bumper Guard fits the following vehicles:2011 Jeep Grand Cherokee - Laredo, Limited, Overland & Summit2012 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & Summit2013 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude, Summit & Trailhawk2014 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & Blackhawk2015 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & Blackhawk2016 Jeep Grand Cherokee - Laredo, Limited, Overland & 75th Anniversary Edition2017 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & Trailhawk2018 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & Trailhawk2019 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & TrailhawkDoes NOT fit on the following vehicles:2012-2019 Jeep Grand Cherokee - 3.0L Diesel with DEF Tank (USA 3.0L Models)2014-2019 Jeep Grand Cherokee - Summit2015, 2016, 2018 & 2019 Jeep Grand Cherokee - High Altitude2012-2019 Jeep Grand Cherokee - SRTFitment confirmed with the following products:Mopar Towbar - USA (part# 82212180AC)Mopar Towbar - Australia (part# AUS2014WKTB)Does NOT fit with the following products:Hayman Reece TowbarLong Range Automotive Auxiliary Fuel Tank (part# JGCHWKDAMY14 & JGCHWKPAMY14)INSTALLATION INSTRUCTIONS
-
WK2 Rear Bumper Guard (Corner Protection Kit)
Out of Stock $449.99 USD $499.99 USD
Chief Products WK2 Rear Bumper Guard (Corner Protection Kit) is engineered to bolt-on to the WK2 Rear Bumper Guard and extend protection to the vulnerable rear corners of your WK2. The clean simple design hugs the lines of the rear bumper to provide maximum protection for the rear of your WK2 without ruining your Jeep’s good looks.
-
Chief Products WK2 Rear Bumper Guard (Corner Protection Kit) is engineered to bolt-on to the WK2 Rear Bumper Guard and extend protection to the vulnerable rear corners of your WK2. The clean simple design hugs the lines of the rear bumper to provide maximum protection for the rear of your WK2 without ruining your Jeep’s good looks.
We spent more than 1 year in development getting every detail just right. We performed months of on-road and off-road testing, putting the WK2 Rear Bumper Guard (Corner Protection Kit) through numerous off-road challenges. That passionate attention-to-detail led to numerous refinements that increased ease-of-installation, lowered weight, maximised performance and increased strength.
FEATURESHigh-Strength SteelE-Coat (Industry Leading Corrosion Resistance)Durable Powder Coat Finish (Textured Black)Recessed Mounting BoltsEasy Installation (Difficulty = 4/10)SPECIFICATIONS10.75kg Fully Installed Weight (Including Mounting Hardware) 23.9˚ Departure Angle (Standard Suspension) 25.9˚ Departure Angle (Air Suspension OR2) INCLUDES2 Corner Guards 2 Main Mounting Brackets 2 Corner Mounting Brackets 2 Exhaust Support Brackets 4 M10 x 25mm High Tensile (10.9) Bolts (Zinc Plated) 12 M8 x 25mm High Tensile (10.9) Bolts (Zinc Plated) 4 M8 x 16mm High Tensile (10.9) Bolts (Zinc Plated) 4 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 16 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 1 4g pouch Anti-Seize Installation Instructions * REQURIED *
WK2 Rear Bumper Guard (Corner Protection Kit) cannot be installed without WK2 Rear Bumper Guard. The (2) products integrate seamlessly to provide robust protection for the rear of your WK2.
* ATTENTION *
This product does not fit 3.0L diesel models with a DEF Tank (USA 3.0L Models). -
High Strength Off-Road ProtectionEngineered and fully tested to provide off-road protection for the vulnerable rear corners of your WK2. Accomplished via 3mm & 5mm high-strength steel braces and boxed sections to provide maximum strength.
Contoured To FitWe designed the WK2 Rear Bumper Guard to hug the lines of the rear bumper, so it provides off-road protection while remaining unobtrusive.
Perfect IntegrationEngineered to integrate seamlessly with the WK2 Rear Bumper Guard and provide robust off-road protection for the rear of your WK2.
Compatible With Rear Parking SensorsUnlike bulky off-road rear bumpers, the WK2 Rear Bumper Guard is fully compatible with the rear parking sensors and requires no alteration to the rear parking sensor system.
Compatible With Jeep/Mopar TowbarsDesigned to integrate seamlessly with Jeep/Mopar Towbars (USA & Australian models).
Recessed Mounting BoltsEngineered to keep bolt heads protected off-road.
Industry Leading Corrosion ProtectionWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process.
Real World TestingThere aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.
Top Quality Finishing TouchesWe include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great. -
Requires WK2 Rear Bumper Guard. Bolts into existing mounting points in the frame, no drilling or cutting of OEM parts needed.WK2 Rear Bumper Guard (Corner Protection Kit) fits the following vehicles:2011 Jeep Grand Cherokee - Laredo, Limited, Overland & Summit2012 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & Summit2013 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude, Summit & Trailhawk2014 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & Blackhawk2015 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & Blackhawk2016 Jeep Grand Cherokee - Laredo, Limited, Overland & 75th Anniversary Edition2017 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & Trailhawk2018 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & Trailhawk2019 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & TrailhawkDoes NOT fit on the following vehicles:2012-2019 Jeep Grand Cherokee - 3.0L Diesel with DEF Tank (USA 3.0L Models)2014-2018 Jeep Grand Cherokee - Summit2015, 2016 & 2019 Jeep Grand Cherokee - High Altitude2012-2019 Jeep Grand Cherokee - SRTFitment confirmed with the following products:MagnaFlow Stainless MF Series Cat-Back Performance ExhaustINSTALLATION INSTRUCTIONS
-
![WK2 Rock Rails [No Tread]](http://cdn.shopify.com/s/files/1/1259/1747/products/WK2-Rock-Rails-VARIANT-No-Tread-WEB.jpg?v=1578979209)
![-- INSTALLED [No Tread] --](http://cdn.shopify.com/s/files/1/1259/1747/products/WK2-Rock-Rails-INSTALLED-No-Tread-screen.jpg?v=1578979209)
WK2 Rock Rails
$809.99 USD
Chief Products WK2 Rock Rails deliver critical off-road protection for your WK2. Our integrated design replaces the OEM plastic rocker panels to maintain off-road clearance and the flush mounted bolts ensure everything looks great when you open the doors. The steps keep obstacles away from the sides of your WK2, while also providing easy entry (or convenient access to your roof rack). To ensure you've got the best looking WK2 on the trails, we provide (2) tread plate options that allow you to stylise your WK2 Rock Rails however you choose. Best of all, we spent (8) months performing rigorous real world testing to ensure these are the strongest and most reliable rock rails available for your WK2.
-
Chief Products WK2 Rock Rails deliver critical off-road protection for your WK2 with an integrated design that compliments your Jeep’s good looks. We utilise high-strength steel and increased body connections to deliver improved rigidity and better impact force distribution than any of our competitors. The smooth ‘boat bottom’ design protects the body seam underneath the vehicle while ensuring you can easily slide over off-road obstacles. The integrated design replaces the OEM plastic rocker panels to maintain off-road clearance, and the flush mounted bolts ensure everything looks great when you open the doors. The steps have been optimised to keep obstacles away from the sides of your WK2, while also providing easy entry (or convenient access to your roof rack). To ensure you’ve got the best looking WK2 on the trails, we provide (2) tread plate options that allow you to stylise your WK2 Rock Rails however you choose. Best of all, we spent (8) months performing rigorous real world testing to ensure these are the strongest and most reliable rock rails available for your WK2.
Our Bare Bones Edition strips back features without sacrificing quality to deliver a no-nonsense version of our WK2 Rock Rails. They still provide industry leading off-road protection, easy installation and a top-notch integrated design, but at a significantly lower price point. They’re perfect for anyone looking for a purpose built protection option for their WK2.
FEATURESFully Integrated DesignSmooth 'Boat Bottom' Design(2) Tread Plate Options(2) Jack Points (Front & Rear underside of each rock rail)High-Strength SteelE-Coat (Industry Leading Corrosion Resistance)Easy Installation (Difficulty = 3/10)SPECIFICATIONS40.3kg [NO TREAD] (installed weight) 43.9kg TREK ELEVEN (installed weight) 43.8kg SAFARI THREE (installed weight) 29.8kg BARE BONES EDITION (installed weight) INCLUDES2 Rock Rails (E-Coat + Textured Black Powder Coating) 2 Clamping Rails (E-Coat) 2 Clamping Plates (E-Coat) 2 Tread Plate, Lower (6061 Aluminium + Silver Akzo Powder Coating) 2 Tread Plate, Upper (E-Coat + Textured Black Powder Coating) 4 Rear Mounting Plates (E-Coat) 12 Chief Products Body Insert Nuts (E-Coat) 22 M6 x 16mm (8.8) Counter Sunk Head Bolts (Zinc Plated) 22 M6 x 10mm (8.8) Counter Sunk Head Bolts (Black Zinc Plated) 8 M6 x 25mm (10.9) Bolts (Zinc Plated) 12 M10 x 40mm (10.9) Bolts (Zinc Plated) 12 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 8 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 8 M6 (CL8) Nuts (Zinc Plated) 1 4g pouch Anti-Seize Installation Instructions OPTIONSMORE INFOEASY TO UPGRADE - You can easily upgrade WK2 Rock Rails [NO TREAD] at any time by adding - WK2 Rock Rails (Tread KIT). -
Off-Road ProtectionProvides off-road protection for the rocker panels and lower doors of your WK2. Our design also provides protection for the body seam and wiring loom that run along the underside of your WK2.
High-StrengthMade from High-Strength Steel with a design that incorporates more body connections than our competitors to improve rigidity and provide significantly better impact force distribution. Through FEA computer modelling and (8) months of real world testing we've delivered high-strength rock rails that you can rely on when you need them most.
Great StyleOur design team paid attention to every line, so we could deliver rock rails that compliment the lines of your WK2 with a fully integrated appearance. Open the doors and you immediately notice the attention-to-detail with our streamlined design and flush mounting bolts. Best of all, we provide (2) tread plate options so you can stylise your WK2 Rock Rails however you choose. The dual layer design of the tread plates utilises a polished lower plate that looks great and provides an instant wow factor.
ConvenienceThe steps have been optimised to keep obstacles away from the sides of your WK2, while also providing easy entry (or convenient access to your roof rack). Through real-world testing we ensured you could easily step out over the steps without hitting your leg. We even tested our tread plates to ensure small feet (or paws) wouldn't have troubles with the openings in the tread plates.
Maintains Off-Road ClearanceSince our design replaces the OEM plastic rocker panels, (rather than bolting below) it maintains maximum off-road clearance.
Jack PointsWe supply (2) jack points (front & rear) on the underside of each rock rail.
Smooth 'Boat Bottom' DesignOur smooth 'Boat Bottom' design ensures that you can easily slide over off-road obstacles. There's nothing to get caught on off-road and all of the mounting bolts are tucked away and protected.
Easy To InstallMany rock rails for the WK2 are very difficult to install. Some can take up to 8 hours, while others require drilling and numerous nutsert installs. As a point of difference, our engineering team has delivered an install process that is extremely easy. We provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can install this yourself.
Industry Leading Corrosion ProtectionWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. Additionally, if you purchase one of our tread plates you'll be happy to know we anodise the polished Aluminium to protect it from oxidation and keep it looking great.
Real World TestingThere aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.
Top Quality Finishing TouchesWe include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great. -
Bolts into existing mounting points in the frame, no drilling or cutting required. Replaces OEM plastic rocker panels.WK2 Rock Rails fit the following vehicles:2011 Jeep Grand Cherokee - Laredo, Limited & Overland2012 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT & Altitude2013 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Altitude & Trailhawk2014 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, SRT, Altitude & Blackhawk2015 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Summit, Altitude, Blackhawk & High Altitude2016 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Summit, High Altitude & 75th Anniversary Edition2017 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Summit, Altitude & Trailhawk2018 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Summit, Altitude, High Altitude,Trailhawk & Trackhawk2019 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Summit, Altitude, High Altitude,Trailhawk & Trackhawk
* Fits USA & Export models.* The OEM fender flares on SRT, Summit & High Altitude extend further into the wheel wells than other WK2 models. We've chosen not to extend our WK2 Rock Rails to match these flares because it would limit the ability to install larger tyres.INSTALLATION INSTRUCTIONS