Roof Rack (2x Plank KIT -- 1146mm)
$236.99 USD
Planks are a key building block of our modular roof rack system. This KIT includes (2) Planks; measuring 1146mm (45.12") long, 156mm (6.14") wide and an amazing 25mm (0.98") thin. Our Planks are designed so they can be easily bolted to our Mounting Rails in various configurations. This allows our customers to create a ‘Roof Platform’ that best suits their needs. It also enables our customers to easily add/move/change their Planks to meet whatever future needs may arise. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to bolt/fasten to the Plank at any point along the entire length of the Plank.
Planks are a key building block of our modular roof rack system. This KIT includes (2) Planks; measuring 1146mm (45.12") long, 156mm (6.14") wide and an amazing 25mm (0.98") thin. Our Planks are designed so they can be easily bolted to our Mounting Rails in various configurations. This allows our customers to create a ‘Roof Platform’ that best suits their needs. It also enables our customers to easily add/move/change their Planks to meet whatever future needs may arise. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to bolt/fasten to the Plank at any point along the entire length of the Plank.
We utilise a proprietary Aircraft-Grade Aluminium Alloy and an advanced Extrusion Manufacturing Process that allows us to deliver Planks with an extremely high strength-to-weight ratio. As an example, one of our Planks can easily hold a 300kg person (standing directly in the middle of a 1.2M Plank) and it only weighs 2.5kg.
1146mm | PLANK LENGTH (45.12 inches) |
156mm | PLANK WIDTH (6.14 inches) |
25mm | PLANK THICKNESS (0.98 inches) |
2.56kg | INSTALLED WEIGHT (1 plank) |
Roof Rack (4x Plank End-Cap KIT -- Slotted)
$37.99 USD
Our Plank End-Caps provide a nice finish to the ends of our Planks and are great for anyone that isn't running our WK2 Roof Rack (Platform Frame KIT). This KIT includes (4) Plank End-Caps, (enough for 2x Planks). They bolt on easily and feature (7) slots (just like a traditional Jeep grille).
Our Plank End-Caps provide a nice finish to the ends of our Planks and are great for anyone that isn't running our WK2 Roof Rack (Platform Frame KIT). This KIT includes (4) Plank End-Caps, (enough for 2x Planks). They bolt on easily and feature (7) slots (just like a traditional Jeep grille).
Roof Rack (2x Tie-Down Plate KIT)
Out of Stock $76.99 USD
Our Tie-Down Plates are engineered to provide numerous ways to secure gear and accessories to your roof rack. They clamp securely between our Planks in a way that allows them to easily move and fasten anywhere along the entire length of the Planks. Manufactured from Aircraft-Grade Aluminium Alloys and High-Strength Steel, they're extremely strong to meet the high demands they're sure to encounter. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M8 & M10) that can be used to fasten/bolt just about any accessory you can find. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your platform.
Our Tie-Down Plates are engineered to provide numerous ways to secure gear and accessories to your roof rack. They clamp securely between our Planks in a way that allows them to easily move and fasten anywhere along the entire length of the Planks. Manufactured from Aircraft-Grade Aluminium Alloys and High-Strength Steel, they're extremely strong to meet the high demands they're sure to encounter. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M8 & M10) that can be used to fasten/bolt just about any accessory you can find. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your platform.
115mm | TIE-DOWN PLATE LENGTH (fully assembled) |
110mm | TIE-DOWN PLATE WIDTH (fully assembled) |
0.50kg | INSTALLED WEIGHT(1 tie-down plate) |
2 | Tie-Down Plate - Top (Cast from Aircraft-Grade Aluminium Alloy) |
2 | Tie-Down Plate - Bottom (5mm High-Strength Steel) |
4 | M8 x 20mm (Round Head, Socket) Bolts (316 Stainless Steel) |
4 | M8 Wedge-Lock Washers (Zinc Flake Coating) |
1 | M8 T-Nut (Grade 10.9) (Black Oxide) |
1 | M10 T-Nut (Grade 10.9) (Black Oxide) |
1 | Installation Instructions |
• | Tie-Down Strap Hook on Centre Section |
• | Rope Pass Through Centre Section |
• | (2) T-Nut Slots - M8 Bolt into M8 T-Nut (upper location between plates, includes room for bolt pass through) |
• | (2) T-Nut Slots - M10 Bolt into M10 T-Nut (upper location between plates, includes room for bolt pass through) |
• | (2) T-Nut Slots - M8 Bolt into M8 T-Nut (lower location below both plates, for heavy duty applications, includes room for bolt pass through) |
• | (2) T-Nut Slots - M10 Bolt into M10 T-Nut (lower location below both plates, for heavy duty applications, includes room for bolt pass through) |
• | (2) T-Nut Slots - M12 Carriage Bolt into square hole in Lower Plate (up through lower plate recommended for heavy duty applications) |
• | (2) T-Nut Slots - M8, M10 & M12 Bolt Pass Through (with nut located below lower plate) |
• | (2) M8 Mounting Bolts - Replace M8 Mounting Bolt with Longer Bolt (using weld nut on lower plate) |
Roof Rack (10x T-Nut KIT)
$24.99 USD
NOW SHIPPING --> M8
PRE-ORDER --> M10 --> SHIPS (27 MAY 2022)
This T-Nut KIT includes (10) T-Nuts engineered for maximum performance and compatibility with the Chief Products roof rack system. We now offer them in (3) sizes (M6, M8 & M10) to accommodate any accessory you find. Designed to fit perfectly within our Planks and Tie-Down Plates. These high-tensile 10.9 Grade T-Nuts can handle anything you throw at them. Blackened to look great when installed, and coated in Black Oxide to ensure they stay that way even in the most hostile environments.
This T-Nut KIT includes (10) T-Nuts engineered for maximum performance and compatibility with the Chief Products roof rack system. We now offer them in (3) sizes (M6, M8 & M10) to accommodate any accessory you find. Designed to fit perfectly within our Planks and Tie-Down Plates. These high-tensile 10.9 Grade T-Nuts can handle anything you throw at them. Blackened to look great when installed, and coated in Black Oxide to ensure they stay that way even in the most hostile environments.
10 | M6 T-Nuts (Grade 10.9) (Black Oxide) |
10 | M8 T-Nuts (Grade 10.9) (Black Oxide) |
10 | M10 T-Nuts (Grade 10.9) (Black Oxide) |
Roof Rack (Roof Top Tent KIT)
$50.99 USD
Our Roof Top Tent KIT is designed to make installation of your Roof Top Tent super easy. The KIT includes (4) Roof Top Tent Brackets made from 5mm steel. These brackets, along with the mounting hardware from your RTT, enable you to easily and securely clamp your Roof Top Tent onto our Planks.
Our Roof Top Tent KIT is designed to make installation of your Roof Top Tent super easy. The KIT includes (4) Roof Top Tent Brackets made from 5mm steel. These brackets, along with the mounting hardware from your RTT, enable you to easily and securely clamp your Roof Top Tent onto our Planks.
WK2 Roof Rack (Platform Frame KIT)
$330.99 USD
Our WK2 Roof Rack (Platform Frame KIT) is designed to provide your roof rack with a smooth outside border that looks great, adds strength and delivers the best aerodynamics possible. The corners of our Platform Frame KIT are cast from a proprietary Aircraft-Grade Aluminium Alloy and they fit tightly together with each of the Frame Rails. The Frame Rails utilise the same Aircraft-Grade Aluminium Alloy along with an advanced Extrusion Manufacturing Process, to deliver an end product that is extremely light and strong.
Our WK2 Roof Rack (Platform Frame KIT) is designed to provide your roof rack with a smooth outside border that looks great, adds strength and delivers the best aerodynamics possible. The corners of our Platform Frame KIT are cast from a proprietary Aircraft-Grade Aluminium Alloy and they fit tightly together with each of the Frame Rails. The Frame Rails utilise the same Aircraft-Grade Aluminium Alloy along with an advanced Extrusion Manufacturing Process, to deliver an end product that is extremely light and strong.
1490mm | PLATFORM FRAME LENGTH (fully assembled) |
1246mm | PLATFORM FRAME WIDTH (fully assembled) |
28.34mm | PLATFORM FRAME THICKNESS (fully assembled) |
6.03kg | INSTALLED WEIGHT --> Platform Frame KIT |
WK2 Roof Rack (Hidden Air Dam)
Out of Stock $59.99 USD
Chief Products WK2 Roof Rack (Hidden Air Dam) is engineered to significantly reduce wind noise (a common problem in the roof rack industry) without ruining your Jeep's good looks. Weighing only 145 grams, it's mounted out-of-sight underneath your roof rack, and it reduces wind noise by restricting the amount of air that flows through the confined space under your rack.
Chief Products WK2 Roof Rack (Hidden Air Dam) is engineered to significantly reduce wind noise (a common problem in the roof rack industry) without ruining your Jeep's good looks. Weighing only 145 grams, it's mounted out-of-sight underneath your roof rack, and it reduces wind noise by restricting the amount of air that flows through the confined space under your rack.
To accomplish this goal, many roof rack companies offer a large wind fairing (often at an extra cost) that must be mounted to the front of their roof rack. Our engineers achieve the same (or better) performance from a product that is completely hidden. Meaning it won't change the looks of your Jeep, it won't inhibit how you use your rack, and it won't obstruct the view out of your sunroof (if you have one).
Best of all, we include our WK2 Roof Rack (Hidden Air Dam) with every WK2 Roof Rack we sell.
1040mm | OVERALL WIDTH (between Mounting Rails) |
0.58kg | INSTALLED WEIGHT |
Roof Rack (Anchor Point)
Coming Soon $0.00 USD
Roof Rack (Anchor Point)
Roof Rack (Anchor Point)