• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 LOWER FRONT GUARD is engineered to protect the critical components at the lower front of your WK2 without ruining your Jeep's good looks. Weighing only 15kg (approx.) when fully installed, it provides off-road protection for the Lower Radiator Core, ACC Camera, Windshield Washer Bottle and Air Suspension Controller. It features a centre section made from 5mm high-strength steel for unparalleled strength, while still providing critical airflow to the lower radiator core. Bolted directly to the sub-frame it provides the very best approach angle possible, and our Bolt Head Protectors protect the front mounting bolts from off-road damage. Best of all, we've designed the WK2 LOWER FRONT GUARD so it installs behind the removable lower front fascia, providing full protection off-road while still allowing you to maintain a factory appearance on-road.

  We've created a modular system of protection products for the WK2, this means our WK2 LOWER FRONT GUARD will integrate perfectly with all of our other products --> WK2 HIDDEN WINCH MOUNT, WK2 SUMP PROTECTION PLATE, WK2 NUDGE BAR, WK2 RECOVERY HOOK and WK2 RECOVERY POINT.

  FEATURES

  HIGH-STRENGTH STEEL (High Strength to Weight Ratio)

  DURABLE POWDER COAT FINISH (Textured Black)

  E-COAT (Industry Leading Corrosion Protection)

  AIRFLOW SLOTS

  DRAINAGE SLOTS

  EASY INSTALLATION (Difficulty = 4/10)
  SPECIFICATIONS

  14.90kg	INSTALLED WEIGHT --> (BASE) + STANDARD GUARD
  15.20kg	INSTALLED WEIGHT --> (BASE) + ACC GUARD
  +4.2°	APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with STANDARD GUARD)
  +2.2°	APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with ACC GUARD)
  +10.6°	APPROACH ANGLE (Summit & SRT with STANDARD GUARD)
  +8.6°	APPROACH ANGLE (Summit & SRT with ACC GUARD)

  *  Approach Angle calculations represent improvement over stock (based on stock tyres, lower front fascia removed and air suspension in STD height). Raising the air suspension or installing larger tyres will increase the approach angle improvements.
  INCLUDES

  
  

  (BASE) + STANDARD GUARD

  1	Guard KIT (Standard)
  1	Centre Section (5mm High-Strength Steel)
  2	Chassis Mounting Brackets
  2	Corner Mounting Brackets
  2	Corner Guards
  1	Air Dam Reinforcement Bracket
  4	M6 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083)
  2	M8 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083)
  4	M10 x 25mm High Tensile (10.9) Bolts (Zinc Plated)
  2	M8 x 100mm High Tensile (10.9) Bolts (Zinc Plated)
  2	M8 x 30mm High Tensile (8.8) Bolts (Zinc Plated)
  14	M8 x 25mm High Tensile (8.8) Bolts (Black Zinc Plated)
  4	M6 x 40mm High Tensile (10.9) Bolts (Zinc Plated)
  4	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  18	M8 Wedge-Lock Extended Washers (Zinc Flake Coating)
  4	M6 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	M8 x 8mm Bushings (6061 Aluminium)
  12	M6 x 25mm Washers (Zinc Plated)
  4	M6 Nutserts (Stainless Steel)
  1	4g pouch Anti-Seize
  1	Installation Instructions

  
  

  (BASE) + ACC GUARD
  

  1	Guard KIT (ACC)
  1	Centre Section (5mm High-Strength Steel)
  2	Chassis Mounting Brackets
  2	Corner Mounting Brackets
  2	Corner Guards
  1	Air Dam Reinforcement Bracket
  4	M6 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083)
  2	M8 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083)
  4	M10 x 25mm High Tensile (10.9) Bolts (Zinc Plated)
  2	M8 x 100mm High Tensile (10.9) Bolts (Zinc Plated)
  2	M8 x 30mm High Tensile (8.8) Bolts (Zinc Plated)
  14	M8 x 25mm High Tensile (8.8) Bolts (Black Zinc Plated)
  4	M6 x 40mm High Tensile (10.9) Bolts (Zinc Plated)
  4	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  18	M8 Wedge-Lock Extended Washers (Zinc Flake Coating)
  4	M6 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	M8 x 8mm Bushings (6061 Aluminium)
  12	M6 x 25mm Washers (Zinc Plated)
  4	M6 Nutserts (Stainless Steel)
  1	4g pouch Anti-Seize
  1	Installation Instructions

  OPTIONS

  
  

  (BASE) + STANDARD GUARD
  

  For WK2s without ACC (Adaptive Cruise Control).

  
  

  (BASE) + ACC GUARD
  

  For WK2s with ACC (Adaptive Cruise Control).

  
  

  (BASE)

  Base unit with NO Centre Guard.
• OFF-ROAD PROTECTION

  Critical off-road protection for the Lower Radiator Core, ACC Camera, Windshield Washer Bottle and Air Suspension Controller. Accomplished via numerous sub-frame braces and high-strength steel that is 5mm thick on the main centre section.

  MAINTAIN OEM APPEARANCE

  The lower front fascia can be easily installed over the WK2 LOWER FRONT GUARD, maintaining the great looks of the Jeep Grand Cherokee while driving around town. Then when you're heading off-road, you can easily remove the lower front fascia via (5) 1/4 turn fasteners to reveal the WK2 LOWER FRONT GUARD.

  LOW INSTALLED WEIGHT

  Only 15kg (approx.) when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) - 90kgs (steel).

  BETTER COOLING PERFORMANCE

  Our design provides significant air flow to the lower radiator core. This is especially important if you're towing, operating in hot climates or have additional items (off-road lights, etc.) restricting airflow to the radiator core. Considering a large portion of airflow comes up from the road surface, we're often surprised how many competing lower protection products are missing this critical feature.

  MAXIMUM APPROACH ANGLE

  Since our design doesn't extend past the front of your WK2, the maximum approach angle is retained.

  CCOMPATIBLE With EXCELLENT FRONT RECOVERY OPTIONS

  Can be installed with OEM Tow Hooks (if available for your WK2) or Chief Products WK2 Recovery Points & WK2 Recovery Hooks (engineer rated to 4,500kg).

  EASILY & INEXPENSIVELY REPAIRED

  Because we designed the WK2 Lower Front Guard as a set of components, if you damage one part, you can easily and cost effectively replace just that part.

  LOW COST

  Significantly less expensive than a Bull Bar, especially when you include shipping and installation costs.

  EASY TO INSTALL

  We provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can install this yourself.

  INDUSTRY LEADING CORROSION PROTECTION

  We utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.

  BOLT HEAD PROTECTION

  Our Bolt Head Protectors are engineered to keep critical bolt heads protected from off-road obstacles. They feature a slotted design that keys directly into the product with no possibility of spinning or moving when hit off-road.

  REAL WORLD TESTING

  There aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.

  TOP QUALITY FINISHING TOUCHES

  We include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
• Bolts into existing mounting points in the frame, no drilling or cutting needed.
  Fitment confirmed on the following vehicles:

  2011 Jeep Grand Cherokee - All Models & Limited Editions

  2012 Jeep Grand Cherokee - All Models & Limited Editions

  2013 Jeep Grand Cherokee - All Models & Limited Editions

  2014 Jeep Grand Cherokee - All Models & Limited Editions

  2015 Jeep Grand Cherokee - All Models & Limited Editions

  2016 Jeep Grand Cherokee - All Models & Limited Editions

  2017 Jeep Grand Cherokee - All Models & Limited Editions

  2018 Jeep Grand Cherokee - All Models & Limited Editions

  2019 Jeep Grand Cherokee - All Models & Limited Editions

  2020 Jeep Grand Cherokee - All Models & Limited Editions

  2021 Jeep Grand Cherokee - All Models & Limited Editions

  *  Fits USA & Export models.

  **  Fitment on Summit & High Altitude (2013-2016) requires permanent removal of the lower front fascia.

  ***  Fitment on Summit & High Altitude (2017-2021) and SRT (all model years) requires permanent removal of the lower front fascia and cutting of the plastic bumper.
  Fitment unconfirmed on the following vehicles:

  2018-2020 Jeep Grand Cherokee - Trackhawk
  Fitment confirmed with the following products:

  WK2 SUMP PROTECTION PLATE

  WK2 HIDDEN WINCH MOUNT

  WK2 NUDGE BAR

  WK2 RECOVERY POINT

  WK2 RECOVERY HOOK

  Uneek WK2 Grand Cherokee Bash Plate

  Rocky Road Bumper Kits & Winch Mounting Kits (2011 - 2018 WK2s)

  OEM Tow Hooks (part# 82212095)
  Product does NOT fit with the following products:

  WK2 OFF-ROAD FRONT BUMPER

  Jeep Australia Tow Hook (part# CH8220WKRH or AUSWK14HOOK)

  Jeep Belly Pan (part# 68089029AC)
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Can I Install This Product Myself?

  Forged In Australia?

  What Warranty Do You Provide?

  How Does The WK2 Lower Front Guard Compare To A Bull Bar?

  How Do You Remove The Lower Front Fascia?

  What's The Optimum Order Of Installation For Multiple WK2 Products?

  What Products Are Compatible With Luxury Model WK2s (Summit, High Altitude, SRT, etc.)?

  [COMING SOON] How Do I Determine Which Version I Need?

  [COMING SOON] Can I Drive With The OEM Lower Front Fascia Removed?

  [COMING SOON] Do I Need New Front Springs To Accommodate The Additional Weight?

  [COMING SOON] Can I Install These Products Together; WK2 Hidden Winch Mount + WK2 Lower Front Guard + OEM Tow Hooks?

An installation kit for the WK2 LOWER FRONT GUARD. It provides the appropriate centre guard for the WK2 LOWER FRONT GUARD.

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 Recovery Point is the strongest & safest recovery attachment point available for your WK2. It features a large 55mm eyelet design that is extremely easy-to-use, while still being engineer certified to 4,500kg WLL, (8,000kg WLL when using pair with a bridle strap). The closed loop design provides the safety benefits of a 'Closed Recovery System'. The 5mm radius edges (ADR requirement) are a key feature that won't damage soft shackle recovery gear. Best of all, we include all the 'extras' (High-Tensile 10.9 Corrosion Resistant Fasteners, Heavy-Duty Strengthening Plates & Wedge-Lock Washers) needed to ensure this is a product you can trust when you need it most.

  FEATURES

  HIGH-STRENGTH STEEL (20mm)

  DURABLE POWDER COAT FINISH (Advanced Polyester Thermosetting Powder)

  E-COAT (Industry Leading Corrosion Protection)

  EASY INSTALLATION (Difficulty = 2/10)
  SPECIFICATIONS

  4,500kg	SINGULAR --> WORKING LOAD LIMIT [Engineer Certified]
  8,000kg	PAIR --> WORKING LOAD LIMIT [Engineer Certified] (using bridle strap)
  4.58kg	INSTALLED WEIGHT --> SINGULAR
  9.16kg	INSTALLED WEIGHT --> PAIR
  55mm	EYELET

  INCLUDES

  TEXTURED BLACK [SINGULAR]

  1	Recovery Point
  1	Mounting Plate (Aluminium 5083)
  1	Strengthening Plate (Aluminium 5083)
  2	M10 x 90mm High Tensile (10.9) Bolts (Zinc Plated)
  1	M10 x 65mm High Tensile (10.9) Bolt (Zinc Plated)
  4	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  1	4g pouch Anti-Seize
  1	Installation Instructions

  TEXTURED BLACK [PAIR]

  2	Recovery Points
  2	Mounting Plates (Aluminium 5083)
  2	Strengthening Plates (Aluminium 5083)
  4	M10 x 90mm High Tensile (10.9) Bolts (Zinc Plated)
  2	M10 x 65mm High Tensile (10.9) Bolts (Zinc Plated)
  8	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	4g pouches Anti-Seize
  1	Installation Instructions

  FLAME RED [SINGULAR]

  1	Recovery Point
  1	Mounting Plate (Aluminium 5083)
  1	Strengthening Plate (Aluminium 5083)
  2	M10 x 90mm High Tensile (10.9) Bolts (Zinc Plated)
  1	M10 x 65mm High Tensile (10.9) Bolt (Zinc Plated)
  4	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  1	4g pouch Anti-Seize
  1	Installation Instructions

  FLAME RED [PAIR]

  2	Recovery Points
  2	Mounting Plates (Aluminium 5083)
  2	Strengthening Plates (Aluminium 5083)
  4	M10 x 90mm High Tensile (10.9) Bolts (Zinc Plated)
  2	M10 x 65mm High Tensile (10.9) Bolts (Zinc Plated)
  8	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	4g pouches Anti-Seize
  1	Installation Instructions

  OPTIONS

  TEXTURED BLACK [SINGULAR]

  Provides (1) WK2 Recovery Point that is reversible and can be installed on either side of the vehicle (Driver or Passenger). The Textured Black Powder Powder Coating provides a rugged coating that is excellent at hiding scratches.

  TEXTURED BLACK [PAIR]

  Provides (2) WK2 Recovery Points that can be installed as a pair on both sides of the vehicle (Driver and Passenger). The Textured Black Powder Powder Coating provides a rugged coating that is excellent at hiding scratches.

  FLAME RED [SINGULAR]

  Provides (1) WK2 Recovery Point that is reversible and can be installed on either side of the vehicle (Driver or Passenger). The Flame Red Powder Powder Coating provides a rugged coating that looks great and grabs attention as a vehicle highlight.

  FLAME RED [PAIR]

  Provides (2) WK2 Recovery Points that can be installed as a pair on both sides of the vehicle (Driver and Passenger). The Flame Red Powder Powder Coating provides a rugged coating that looks great and grabs attention as a vehicle highlight.

  ---

  * WARNING *

  DO NOT EXCEED THE WORKING LOAD LIMIT OF THIS PRODUCT AT ANY TIME. The Working Load Limit of this product is significantly less for non-straight line pull forces.
  
  

  * CAUTION *

  Every recovery situation has the potential for personal injury. In order to minimise that risk, it is important to familiarise yourself with the proper operation of your recovery equipment before using it, and be constantly safety oriented.
• High Strength

  Engineer rated to 4,500kg WLL (1.5 times GVM of WK2). 1.5 times GVM is considered the engineering minimum standard for recovery points. A 3,000kg GVM vehicle stuck in deep mud/sand needs a high-strength recovery point to safely withstand the forces encountered during recovery. Our engineer rating jumps to 8,000kg when our recovery points are used as a pair with a bridle strap.

  
  

  Winch Compatibility

  If you're installing a winch (or plan to be recovered by one) you'll want a recovery attachment point that is up to the task. For a 10,000lb winch you'll want a recovery attachment point with a minimum WLL of 4,500kg.

  
  

  Safety

  In addition to the engineer rated design, our recovery point also features a 5mm radius on all exposed edges. This ensures safe use with soft shackle recovery gear, while also meeting the required government safety standards (Australian Design Rules as well as various European Pedestrian Safety Standards). The closed loop design delivers a 'Closed Recovery System' ensuring recovery gear won't fall off during recovery. Finally, while our recovery point protrudes through the opening in the lower fascia for easy attachment of recovery gear, it doesn't extend beyond the front most part of the bumper.

  
  

  Ease Of Use

  The large 55mm eyelet makes attachment of recovery gear extremely easy. The closed loop design ensures recovery gear won't fall off during recovery. The recovery point protrudes far enough beyond the lower fascia to ensure side recoveries are easily possible.

  
  

  Compatibility

  Engineered to be 100% compatible with all of our products, as well as all of your Jeep's safety systems. Designed so they can be easily installed on either side of the vehicle (Drivers or Passengers).

  
  

  Easy To Install

  We provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can easily install this yourself. We've even designed the mounting brackets so they're reversible, to make things as easy as possible.

  
  

  Industry Leading Corrosion Protection

  We utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.

  
  

  Colour

  Available in several colours, so you can choose which one looks best on your machine.

  
  

  Attention To Detail

  Machined edges, smooth surfaces and precision alignment.

  
  

  Real World Testing

  There aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.

  
  

  Top Quality Finishing Touches

  We include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
• Bolts into existing mounting points in the frame, no drilling or cutting needed. Some models require cutting holes for access to the points, (see notes below).
  WK2 Recovery Point fits DRIVER & PASSENGER sides of the following vehicles:

  2011 Jeep Grand Cherokee - All Models & Limited Editions

  2012 Jeep Grand Cherokee - All Models & Limited Editions

  2013 Jeep Grand Cherokee - All Models & Limited Editions

  2014 Jeep Grand Cherokee - All Models & Limited Editions

  2015 Jeep Grand Cherokee - All Models & Limited Editions

  2016 Jeep Grand Cherokee - All Models & Limited Editions

  2017 Jeep Grand Cherokee - All Models & Limited Editions

  2018 Jeep Grand Cherokee - All Models & Limited Editions

  2019 Jeep Grand Cherokee - All Models & Limited Editions

  2020 Jeep Grand Cherokee - All Models & Limited Editions

  2021 Jeep Grand Cherokee - All Models & Limited Editions

  
  

  * Fits USA & Export models.

  ** Fitment on most Australian 2016+ models requires cutting (2) holes in the grille area of the lower front fascia. These models no longer provide holes for access to the points.

  *** Fitment on Summit, High Altitude, SRT & Trackhawk (including all models with same lower front bumper/fascia) requires cutting (2) holes in the grille area of the lower front fascia. Instructions are not currently provided for this modification.
  Fitment confirmed with the following products:

  WK2 Sump Protection Plate

  WK2 Lower Front Guard

  WK2 Hidden Winch Mount

  WK2 Nudge Bar
  WK2 Recovery Point does NOT fit with the following products:

  ARB Bull Bar

  ECB Bull Bar

  Uneek Bull Bar

  Ironman Bull Bar

  Rocky Road Outfitters Prerunner

  Rocky Road Outfitters Bumper/Brush Bar/Winch Mount Combo
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Can I Install This Product Myself?

  Forged In Australia?

  What Warranty Do You Provide?

  Which Is Right For My Needs; WK2 Recovery Point or WK2 Recovery Hook?

  Do I Need 1 or 2 Recovery Attachment Points?

  WK2 Recovery Point --- Load Ratings Explained

  What's The Optimum Order Of Installation For Multiple WK2 Products?

  What Products Are Compatible With Luxury Model WK2s (Summit, High Altitude, SRT, etc.)?

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 Nudge Bar provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel (excellent corrosion and scratch resistance) and features a specially engineered mounting system (built from 20mm high-strength steel) that provides maximum strength without reducing your approach angle. It includes a slotted accessory mounting tab that runs the entire length of the bar (making it extremely easy to mount your accessories). Best of all, we've created a bar that is compatible with the all of your Jeep's safety systems - air bags, adaptive cruise control, forward collision warning, lane departure warning and parking sensors*.

  FEATURES

  304 Stainless Steel (Excellent Corrosion & Scratch Resistance)

  Bar = Mirror Polished or Durable Powder Coat Finish

  Mounting Arms = E-Coat + Durable Powder Coat Finish

  Easy Installation (Difficulty = 2/10)
  SPECIFICATIONS

  10.6kg	Fully Installed Weight (Including Mounting Hardware)
  63.5mm	Bar Diameter
  629mm	Mounting Tab Total Length (24.76 inches)
  599mm	Mounting Tab Slot Length (23.58 inches)
  123	Brinell Hardness (Excellent Scratch Resistance)
  29.4˚	Approach Angle (lower front fascia removed + standard suspension)
  33.3˚	Approach Angle (lower front fascia removed + air suspension OR2)
  Same As Stock	Approach Angle (lower front fascia installed)

  INCLUDES

  
  

  GLOSS BLACK

  1	Gloss Black Bar (304 Stainless Steel)
  2	Chassis Mounting Arms
  4	Chassis Mounting Plates
  2	M10 x 60mm Heavy Duty Washers (Black EDP Coating)
  4	M10 x 40mm High Tensile (10.9) Bolts (Black Zinc Plated)
  4	M10 x 65mm High Tensile (10.9) Bolts (Black Zinc Plated)
  8	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	M10 Nuts (Zinc Plated)
  1	4g pouch Anti-Seize
  1	Installation Instructions

  
  

  MIRROR POLISHED

  1	Mirror Polished Bar (304 Stainless Steel)
  2	Chassis Mounting Arms
  4	Chassis Mounting Plates
  2	M10 x 60mm Heavy Duty Washers (Black EDP Coating)
  4	M10 x 40mm High Tensile (10.9) Bolts (Black Zinc Plated)
  4	M10 x 65mm High Tensile (10.9) Bolts (Black Zinc Plated)
  8	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	M10 Nuts (Zinc Plated)
  1	4g pouch Anti-Seize
  1	Installation Instructions

  
  

  [MOUNTING ARMS ONLY]

  2	Chassis Mounting Arms
  4	Chassis Mounting Plates
  2	M10 x 60mm Heavy Duty Washers (Black EDP Coating)
  4	M10 x 40mm High Tensile (10.9) Bolts (Black Zinc Plated)
  4	M10 x 65mm High Tensile (10.9) Bolts (Black Zinc Plated)
  8	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	M10 Nuts (Zinc Plated)
  1	4g pouch Anti-Seize
  1	Installation Instructions

  OPTIONS

  
  

  GLOSS BLACK

  Gloss Black Stainless Steel (304) Bar with Mounting Arms and all required mounting hardware.

  
  

  MIRROR POLISHED

  Mirror Polished 304 Stainless Steel Bar with Mounting Arms and all required mounting hardware.

  
  

  [MOUNTING ARMS ONLY]

  Mounting Arms sold as a separate kit (no bar included).

  MORE INFO

  *Parking Sensor Compatibility - We provide 95% compatibility (read more).
• Excellent Approach Angle

  Since our design doesn't extend below the mounting brackets, the approach angle (an important aspect off-road) is significantly better than other nudge bars.

  
  

  Parking Sensor Compatibility

  Through careful engineering & testing we've delivered a nudge bar that is 95% compatible with the parking sensors on all WK2 models.

  
  

  High Strength

  Our innovative mounting system uses steel tabs on the bottom of each bar to lock the bar securely to (2) 20mm high-strength steel mounting arms. This high-strength design means there will be minimal vibrations for your accessories when you're off-road.

  
  

  Highly Scratch Resistant

  By using 304 Stainless Steel (which has a higher hardness rating than Aluminium) we're able to provide a nudge bar with much better scratch & wear resistance.

  
  

  Low Installed Weight

  Only 10.6kg when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) - 90kgs (steel).

  
  

  Accommodates Numerous Lighting & Accessory Options

  The accessory mounting tab is slotted across its entire length, allowing you to install lights or accessories however you choose.

  
  

  Contoured To Fit

  The accessory mounting tab is contoured to match the curvature of the WK2 grille, so it integrates perfectly with the front of the WK2.

  
  

  Compatible With Front Recovery Points

  Can be installed with Chief Products WK2 Recovery Hooks & WK2 Recovery Points, (which can be installed on driver & passenger sides and are engineer rated to 4,500kg). Due to mounting restrictions, many nudge bars don't allow you to install any front recovery points with their bar.

  
  

  Compatible With Adaptive Cruise Control

  Through careful engineering & testing we've delivered a nudge bar that is compatible with the adaptive cruise control system on all WK2 models.

  
  

  Guards Against Damage During Recovery

  The mounting brackets are designed to stop recovery straps or bow shackles from hitting the bar during an off-road recovery.

  
  

  Easy To Install

  We provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can easily install this yourself. We've even designed the mounting brackets so they swivel slightly during installation to make things as easy as possible.

  
  

  Industry Leading Corrosion Protection

  We utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.

  
  

  Mirror Polish That Lasts

  Our mirror polished 304 Stainless Steel keeps looking good for longer. Polished aluminium bars tend to develop a white haze from oxidation that causes them to lose their lustre.

  
  

  Top Quality Finishing Touches

  We include all the details that matter. Electrophoretic Coating on all mounting plates. High tensile bolts for maximum strength. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
• Bolts into existing mounting points in the frame, no drilling or cutting needed. Some models require cutting holes for the Mounting Brackets, (see notes below).
  WK2 Nudge Bar fits the following vehicles:

  2011 Jeep Grand Cherokee - All Models & Limited Editions

  2012 Jeep Grand Cherokee - All Models & Limited Editions

  2013 Jeep Grand Cherokee - All Models & Limited Editions

  2014 Jeep Grand Cherokee - All Models & Limited Editions

  2015 Jeep Grand Cherokee - All Models & Limited Editions

  2016 Jeep Grand Cherokee - All Models & Limited Editions

  2017 Jeep Grand Cherokee - All Models & Limited Editions

  2018 Jeep Grand Cherokee - All Models & Limited Editions

  2019 Jeep Grand Cherokee - All Models & Limited Editions

  2020 Jeep Grand Cherokee - All Models & Limited Editions

  2021 Jeep Grand Cherokee - All Models & Limited Editions

  
  

  * Fits USA & Export models.

  ** Fitment on most 2016+ Australian & European models requires cutting (2) holes in the grille area of the lower front fascia for the Mounting Brackets to pass through. Instructions are not currently provided for this modification.

  *** Fitment on Summit, High Altitude, SRT & Trackhawk (including all models with same lower front fascia) requires cutting (2) holes in the grille area of the lower front fascia for the Mounting Brackets. Instructions are not currently provided for this modification.
  Fitment confirmed with the following products:

  WK2 Recovery Point

  WK2 Recovery Hook

  WK2 Sump Protection Plate

  WK2 Lower Front Guard

  WK2 Hidden Winch Mount
  Does NOT fit with the following products:

  OEM Tow Hooks (part# 82212095)

  Jeep Australia Tow Hook (part# CH8220WKRH or AUSWK14HOOK)
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Can I install the WK2 Nudge Bar myself?

  Is the WK2 Nudge Bar compatible with the parking sensor system?

  How do you remove the lower front fascia?

  What products are compatible with Summit & High Altitude?

  WK2 Nudge Bar - Revision History

  Forged In Australia?

  What Warranty Do You Provide?

Chief Products WK2 Winch Cradle provides a high-strength place to mount your winch. It includes critical cooling and drainage holes to ensure your winch stays cool and muddy water drains away. As an added bonus, we include an access hole for users that want to 'clock' their winch. Best of all, we provide (2) versions designed to integrate perfectly with the model year of your WK2.

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 Recovery Hook is the strongest & easiest-to-use recovery attachment point available for your WK2. The open hook design allows quick attachment and recovery, while still being engineer certified to 4,500kg WLL, (8,000kg WLL when using pair with a bridle strap). The 5mm radius edges (ADR requirement) are a key feature that won't damage soft shackle recovery gear. Best of all, we include all the 'extras' (High-Tensile 10.9 Corrosion Resistant Fasteners, Heavy-Duty Strengthening Plates & Wedge-Lock Washers) needed to ensure this is a product you can trust when you need it most.

  FEATURES

  HIGH-STRENGTH STEEL (25mm)

  DURABLE POWDER COAT FINISH (Advanced Polyester Thermosetting Powder)

  E-COAT (Industry Leading Corrosion Protection)

  EASY INSTALLATION (Difficulty = 2/10)
  SPECIFICATIONS

  4,500kg	SINGULAR --> WORKING LOAD LIMIT [Engineer Certified]
  8,000kg	PAIR --> WORKING LOAD LIMIT [Engineer Certified] (using bridle strap)
  4.70kg	INSTALLED WEIGHT --> SINGULAR
  9.40kg	INSTALLED WEIGHT --> PAIR
  1	OPEN HOOK

  INCLUDES

  TEXTURED BLACK [SINGULAR]

  1	Recovery Hook
  1	Mounting Plate (Aluminium 5083)
  1	Strengthening Plate (Aluminium 5083)
  2	M10 x 90mm High Tensile (10.9) Bolts (Zinc Plated)
  1	M10 x 65mm High Tensile (10.9) Bolt (Zinc Plated)
  4	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  1	4g pouch Anti-Seize
  1	Installation Instructions

  TEXTURED BLACK [PAIR]

  2	Recovery Hooks
  2	Mounting Plates (Aluminium 5083)
  2	Strengthening Plates (Aluminium 5083)
  4	M10 x 90mm High Tensile (10.9) Bolts (Zinc Plated)
  2	M10 x 65mm High Tensile (10.9) Bolts (Zinc Plated)
  8	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	4g pouches Anti-Seize
  1	Installation Instructions

  FLAME RED [SINGULAR]

  1	Recovery Hook
  1	Mounting Plate (Aluminium 5083)
  1	Strengthening Plate (Aluminium 5083)
  2	M10 x 90mm High Tensile (10.9) Bolts (Zinc Plated)
  1	M10 x 65mm High Tensile (10.9) Bolt (Zinc Plated)
  4	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  1	4g pouch Anti-Seize
  1	Installation Instructions

  FLAME RED [PAIR]

  2	Recovery Hooks
  2	Mounting Plates (Aluminium 5083)
  2	Strengthening Plates (Aluminium 5083)
  4	M10 x 90mm High Tensile (10.9) Bolts (Zinc Plated)
  2	M10 x 65mm High Tensile (10.9) Bolts (Zinc Plated)
  8	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	4g pouches Anti-Seize
  1	Installation Instructions

  OPTIONS

  TEXTURED BLACK [SINGULAR]

  Provides (1) WK2 Recovery Hook that is reversible and can be installed on either side of the vehicle (Driver or Passenger). The Textured Black Powder Powder Coating provides a rugged coating that is excellent at hiding scratches.

  TEXTURED BLACK [PAIR]

  Provides (2) WK2 Recovery Hooks that can be installed as a pair on both sides of the vehicle (Driver and Passenger). The Textured Black Powder Powder Coating provides a rugged coating that is excellent at hiding scratches.

  FLAME RED [SINGULAR]

  Provides (1) WK2 Recovery Hook that is reversible and can be installed on either side of the vehicle (Driver or Passenger). The Flame Red Powder Powder Coating provides a rugged coating that looks great and grabs attention as a vehicle highlight.

  FLAME RED [PAIR]

  Provides (2) WK2 Recovery Hooks that can be installed as a pair on both sides of the vehicle (Driver and Passenger). The Flame Red Powder Powder Coating provides a rugged coating that looks great and grabs attention as a vehicle highlight.

  ---

  * WARNING *

  DO NOT EXCEED THE WORKING LOAD LIMIT OF THIS PRODUCT AT ANY TIME. The Working Load Limit of this product is significantly less for non-straight line pull forces.
  
  

  * CAUTION *

  Every recovery situation has the potential for personal injury. In order to minimise that risk, it is important to familiarise yourself with the proper operation of your recovery equipment before using it, and be constantly safety oriented.
• High Strength

  Engineer rated to 4,500kg WLL (1.5 times GVM of WK2). 1.5 times GVM is considered the engineering minimum standard for recovery hooks. A 3,000kg GVM vehicle stuck in deep mud/sand needs a high-strength recovery hook to safely withstand the forces encountered during recovery. Our engineer rating jumps to 8,000kg when our recovery hooks are used as a pair with a bridle strap.

  
  

  Winch Compatibility

  If you're installing a winch (or plan to be recovered by one) you'll want a recovery hook that is up to the task. For a 10,000lb winch you'll want a recovery hook with a minimum WLL of 4,500kg.

  
  

  Safety

  In addition to the engineer rated design, our recovery hooks also features a 5mm radius on all exposed edges. This ensures safe use with soft shackle recovery gear, while also meeting the required government safety standards (Australian Design Rules as well as various European Pedestrian Safety Standards). Finally, while our recovery hook protrudes through the opening in the lower fascia for easy attachment of recovery gear, it doesn't extend beyond the front most part of the bumper.

  
  

  Ease Of Use

  The open ended recovery hook makes it quick and easy to attach recovery gear (especially important when you need to be recovered quickly). The recovery hook protrudes far enough beyond the lower fascia to ensure side recoveries are easily possible.

  
  

  Compatibility

  Engineered to be 100% compatible with all of our products, as well as all of your Jeep's safety systems. Designed so they can be easily installed on either side of the vehicle (Drivers or Passengers).

  
  

  Easy To Install

  We provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can easily install this yourself. We've even designed the mounting brackets so they're reversible, to make things as easy as possible.

  
  

  Industry Leading Corrosion Protection

  We utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.

  
  

  Colour

  Available in several colours, so you can choose which one looks best on your machine.

  
  

  Attention To Detail

  Machined edges, smooth surfaces and precision alignment.

  
  

  Real World Testing

  There aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.

  
  

  Top Quality Finishing Touches

  We include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
• Bolts into existing mounting points in the frame, no drilling or cutting needed. Some models require cutting holes for access to the hooks, (see notes below).
  WK2 Recovery Hook fits DRIVER & PASSENGER sides of the following vehicles:

  2011 Jeep Grand Cherokee - All Models & Limited Editions

  2012 Jeep Grand Cherokee - All Models & Limited Editions

  2013 Jeep Grand Cherokee - All Models & Limited Editions

  2014 Jeep Grand Cherokee - All Models & Limited Editions

  2015 Jeep Grand Cherokee - All Models & Limited Editions

  2016 Jeep Grand Cherokee - All Models & Limited Editions

  2017 Jeep Grand Cherokee - All Models & Limited Editions

  2018 Jeep Grand Cherokee - All Models & Limited Editions

  2019 Jeep Grand Cherokee - All Models & Limited Editions

  2020 Jeep Grand Cherokee - All Models & Limited Editions

  2021 Jeep Grand Cherokee - All Models & Limited Editions

  
  

  * Fits USA & Export models.

  ** Fitment on most Australian 2016+ models requires cutting (2) holes in the grille area of the lower front fascia. These models no longer provide holes for access to the hooks.

  *** Fitment on Summit, High Altitude, SRT & Trackhawk (including all models with same lower front bumper-fascia) requires cutting (2) holes in the grille area of the lower front fascia. Instructions are not currently provided for this modification.
  Fitment confirmed with the following products:

  WK2 Sump Protection Plate

  WK2 Lower Front Guard

  WK2 Hidden Winch Mount

  WK2 Nudge Bar
  WK2 Recovery Hook does NOT fit with the following products:

  ARB Bull Bar

  ECB Bull Bar

  Uneek Bull Bar

  Ironman Bull Bar

  Rocky Road Outfitters Prerunner

  Rocky Road Outfitters Bumper/Brush Bar/Winch Mount Combo
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Can I Install This Product Myself?

  Forged In Australia?

  What Warranty Do You Provide?

  Which Is Right For My Needs; WK2 Recovery Point or WK2 Recovery Hook?

  Do I Need 1 or 2 Recovery Attachment Points?

  WK2 Recovery Hook --- Load Ratings Explained

  What's The Optimum Order Of Installation For Multiple WK2 Products?

  What Products Are Compatible With Luxury Model WK2s (Summit, High Altitude, SRT, etc.)?

Chief Products WK2 NUDGE BAR (BASE) provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel and it includes a slotted accessory mounting tab that runs the entire length of the bar, making it extremely easy to mount your accessories. We provide (2) versions, so you can choose the one that best fits the style of your WK2.

An installation KIT for the WK2 Off-Road Front Bumper and WK2 Hidden Winch Mount. It provides the required mounting bracket & hardware for the Quadra-Lift Air Suspension.

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 LOWER FRONT GUARD (Upper Fascia) delivers improved styling for all 2013-2021 Jeep Grand Cherokees with a WK2 LOWER FRONT GUARD installed. The 3-piece design ensures easy installation and a low installed weight. Best of all, we're able to deliver this improved styling without negatively effecting vehicle approach angle or any of the vehicle safety systems.

  FEATURES

  LOW INSTALLED WEIGHT

  DURABLE POWDER COAT FINISH (Textured Black)

  E-COAT (Industry Leading Corrosion Protection)

  EASY INSTALLATION (Difficulty = 2/10)
  SPECIFICATIONS

  2.6kg	INSTALLED WEIGHT
  +4.2°	APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with Standard Guard)
  +2.2°	APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with ACC Guard)
  +10.6°	APPROACH ANGLE (Summit & SRT with Standard Guard)
  +8.6°	APPROACH ANGLE (Summit & SRT with ACC Guard)

  *  Approach Angle calculations represent improvement over stock (based on stock tyres, lower front fascia removed and air suspension in STD height). Raising the air suspension or installing larger tyres will increase the approach angle improvements.

  ---

  * REQUIRED *

  WK2 LOWER FRONT GUARD (Upper Fascia) cannot be installed without WK2 LOWER FRONT GUARD. The (2) products integrate seamlessly to provide robust protection for the front of your WK2.
• STYLE

  Our design team paid attention to every facet, so we could deliver a product that looks great from every angle and compliments the lines of your WK2 with a fully integrated appearance.

  MAXIMUM APPROACH ANGLE

  Since our design doesn't extend past the front of your WK2, the maximum approach angle is retained.

  COMPATIBLE with ALL VEHICLE SYSTEMS

  Full compatibility with all vehicle systems (Air Bags, Blind Spot Monitoring, ParkSense Front & Rear Park Assist System, Adaptive Cruise Control, Full-Speed Forward Collision Warning with Active Braking, LaneSense Lane Departure Warning with Lane Keep Assist & Parallel and Perpendicular Park Assist).

  COMPATIBLE with FRONT RECOVERY POINTS

  Compatible with Chief Products WK2 Recovery Points & WK2 Recovery Hooks (engineer rated to 4,500kg) as well as OEM Tow Hooks (approximate engineer rating of 2,500kg).

  MAXIMUM APPROACH ANGLE

  Since our design doesn't extend past the front of your WK2, the maximum approach angle is retained.

  VEHICLE INTEGRATED DESIGN

  Engineered from the ground up to integrate seamlessly with your WK2 (Jeep Grand Cherokee 2011-2020) and Chief Products WK2 Lower Front Guard. Providing compatibility with all vehicle safety systems, maximum approach angle, a design that doesn't impede critical air flow to the radiator core (critical for towing & off-road performance) and styling that closely matches the lines of your Jeep.

  LOW INSTALLED WEIGHT

  Only 2.6kg when fully installed.

  EASY TO INSTALL

  We provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can install this yourself.

  INDUSTRY LEADING CORROSION PROTECTION

  We utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. This industry-leading process (often only offered by OEMs) ensures full-coverage in hard to reach areas that are often missed by other coating processes. On top of the electrophoretic coating, we apply 80µm of an extremely durable and UV stable powder coat (advanced polyester thermosetting powder). This 2 layer approach ensures maximum corrosion protection for all steel parts.

  REAL WORLD TESTING

  There aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.

  TOP QUALITY FINISHING TOUCHES

  We include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
• Requires WK2 LOWER FRONT GUARD. Bolts to existing mounting points, no drilling or cutting required.
  Fitment confirmed on the following vehicles:

  2013 Jeep Grand Cherokee - All Models & Limited Editions

  2014 Jeep Grand Cherokee - All Models & Limited Editions

  2015 Jeep Grand Cherokee - All Models & Limited Editions

  2016 Jeep Grand Cherokee - All Models & Limited Editions

  2017 Jeep Grand Cherokee - All Models & Limited Editions

  2018 Jeep Grand Cherokee - All Models & Limited Editions

  2019 Jeep Grand Cherokee - All Models & Limited Editions

  2020 Jeep Grand Cherokee - All Models & Limited Editions

  2021 Jeep Grand Cherokee - All Models & Limited Editions

  *  Fits USA & Export models.

  **  Fitment on Summit & High Altitude (2013-2016) requires permanent removal of the lower front fascia.

  ***  Fitment on Summit & High Altitude (2017-2021) and SRT (all model years) requires permanent removal of the lower front fascia and cutting of the plastic bumper.
  Product does NOT fit on the following vehicles:

  2011 Jeep Grand Cherokee - All Models & Limited Editions

  2012 Jeep Grand Cherokee - All Models & Limited Editions

  *  Does not fit (and is not needed) on 2011 & 2012 Jeep Grand Cherokees (due to a different front bumper design).
  Fitment unconfirmed on the following vehicles:

  2018-2020 Jeep Grand Cherokee - Trackhawk
  Fitment confirmed with the following products:

  WK2 LOWER FRONT GUARD

  WK2 NUDGE BAR

  WK2 RECOVERY POINT

  WK2 RECOVERY HOOK
  Product does NOT fit with the following products:

  WK2 OFF-ROAD FRONT BUMPER

  WK2 HIDDEN WINCH MOUNT
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Can I Install This Product Myself?

  Forged In Australia?

  What Warranty Do You Provide?

An installation kit for the WK2 Hidden Winch Mount. It provides a strengthening bracket for the WK2 Lower Front Guard. This bracket is recommended, but not required.

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 Hidden Winch Mount provides a high-strength place to mount your winch without ruining your Jeep's good looks. We've engineered a winch mounting system that can remain completely hidden while still being 100% compatible with all of your Jeep's safety systems (air bags, adaptive cruise control, forward collision warning, lane departure warning and parking sensor systems). It delivers numerous industry leading features - including an engineer certified 10,000lb max rating, E-Coat Corrosion Protection and a very low 12.85kg install weight. By positioning the winch between the chassis structure (lower than our competitors) we're able to provide significantly improved cooling, better off-axis strength, as well as more space for larger winches. Best of all, we spent (12) months performing rigorous real world testing to ensure you can rely on our winch mounting system when you need it most.

  FEATURES

  HIGH-STRENGTH STEEL (High Strength To Weight Ratio)

  DURABLE POWDER COAT FINISH (Advanced Polyester Thermosetting Powder)

  E-COAT (Industry Leading Corrosion Protection)

  Drainage Slots

  EASY INSTALLATION (Difficulty = 4/10)
  SPECIFICATIONS

  10,000lbs	WORKING LOAD LIMIT [Engineer Certified]
  12.85kg	INSTALLED WEIGHT (approximate without winch)
  Same As Stock	APPROACH ANGLE (lower front fascia installed)

  INCLUDES

  2011-2015

  1	Winch Cradle (2011-2015)
  2	WK2 Chassis Mounts (Front)
  2	Bonnet Supports
  2	Chassis Support Brackets
  2	Chassis Mounting Plates
  6	M12 x 35mm High Tensile (10.9) Bolts (Zinc Plated)
  6	M10 x 40mm High Tensile (10.9) Bolts (Zinc Plated)
  2	M8 x 25mm (10.9) Bolts (Zinc Plated)
  2	M6 x 25mm (10.9) Bolts (Zinc Plated)
  6	M12 Wedge-Lock Extended Washers (Zinc Flake Coating)
  6	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	M8 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	M6 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	M8 x 32mm Washers (Zinc Plated)
  2	M10 (CL10) Hex Nuts (Zinc Plated)
  4	XMas Tree Fasteners (Black Plastic)
  1	4g pouch Anti-Seize
  1	Installation Instructions

  2016+

  1	Winch Cradle (2016+)
  2	WK2 Chassis Mounts (Front)
  2	Bonnet Supports
  2	Chassis Support Brackets
  2	Chassis Mounting Plates
  6	M12 x 35mm High Tensile (10.9) Bolts (Zinc Plated)
  6	M10 x 40mm High Tensile (10.9) Bolts (Zinc Plated)
  2	M8 x 25mm (10.9) Bolts (Zinc Plated)
  2	M6 x 25mm (10.9) Bolts (Zinc Plated)
  6	M12 Wedge-Lock Extended Washers (Zinc Flake Coating)
  6	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	M8 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	M6 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	M8 x 32mm Washers (Zinc Plated)
  2	M10 (CL10) Hex Nuts (Zinc Plated)
  4	XMas Tree Fasteners (Black Plastic)
  1	4g pouch Anti-Seize
  1	Installation Instructions

  OPTIONS

  2011-2015

  All WK2s 2011 to 2015 (with hydraulic steering).

  2016+

  All WK2s 2016+ (with electric steering).
• High-Strength

  We've engineered our hidden winch system from the ground-up to evenly distribute recovery forces to the chassis of the WK2. This unique approach is especially important during high load pulls and off-axis recoveries that can easily twist (and sometimes even tear) the monocoque chassis of the WK2. Unlike our competitors, we mount to the chassis in multiple locations and strategically use high-strength steels to ensure recovery forces are evenly distributed and don't overload the chassis mounting points. Through FEA computer modelling and (12) months of real world testing we've delivered a high-strength winch mounting system that you can rely on when you need it most.

  
  

  Maintain OEM Appearance

  The WK2 Hidden Winch Mount can be installed behind your bumper and lower front fascia, maintaining the great looks of your Jeep Grand Cherokee. Then if needed you can still easily remove the lower front fascia when heading off-road.

  
  

  Low Installed Weight

  Only 12.85kg when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) - 90kgs (steel).

  
  

  Better Cooling

  By positioning our winch cradle lower than our competitors, we're able to achieve significantly better air flow to the radiator, which delivers much better cooling in hot weather. This is especially important if you're towing or have additional items (off-road lights, etc.) restricting airflow to the radiator core.

  
  

  Lower Winch Position

  Our lower winch position provides numerous benefits. In addition to providing significantly better cooling, it also enables installation of taller winches, doesn’t interfere with number plate mounting and positions the winch directly between the frame rails for maximum strength.

  
  

  Maximum Approach Angle

  Since our design doesn't extend past the front of your WK2, the maximum approach angle is retained.

  
  

  Compatible With Adaptive Cruise Control

  Through careful engineering & testing we've delivered a hidden winch mounting system that is compatible with the adaptive cruise control system on all WK2 models.

  
  

  Compatible With Parking Sensors

  Through careful engineering & testing we've delivered a winch mount that is compatible with parking sensors on all WK2 models.

  
  

  Compatible With Our Entire Product Line

  Already own our WK2 Lower Front Guard, WK2 Sump Protection Plate, WK2 Recovery Hooks, WK2 Recovery Points or WK2 Nudge Bar? We’ve designed the WK2 Hidden Winch Mount to integrate easily with all of our products.

  
  

  Compatible With Excellent Front Recovery Options

  Can be installed with OEM Tow Hooks or Chief Products WK2 Recovery Points & WK2 Recovery Hooks (engineer rated to 4,500kg).

  
  

  Industry Leading Corrosion Protection

  We utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.

  
  

  Real World Testing

  There aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.

  
  

  Top Quality Finishing Touches

  We include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
• Bolts into existing mounting points in the frame, no drilling or cutting required. Installation of lower front fascia requires cutting a hole for the winch fairlead.
  WK2 Hidden Winch Mount fits the following vehicles:

  2011 Jeep Grand Cherokee - All Models & Limited Editions

  2012 Jeep Grand Cherokee - All Models & Limited Editions

  2013 Jeep Grand Cherokee - All Models & Limited Editions

  2014 Jeep Grand Cherokee - All Models & Limited Editions

  2015 Jeep Grand Cherokee - All Models & Limited Editions

  2016 Jeep Grand Cherokee - All Models & Limited Editions

  2017 Jeep Grand Cherokee - All Models & Limited Editions

  2018 Jeep Grand Cherokee - All Models & Limited Editions

  2019 Jeep Grand Cherokee - All Models & Limited Editions

  2020 Jeep Grand Cherokee - All Models & Limited Editions

  2021 Jeep Grand Cherokee - All Models & Limited Editions

  
  

  * Fits USA & Export models.

  ** Fitment on Summit & High Altitude (including all models with same lower front fascia) requires permanent removal of the lower front fascia.

  *** Fitment on SRT requires cutting-modification of the lower front fascia, as well as relocation of the power steering cooler (no bracketry is provided for power steering cooler relocation).
  Fitment unconfirmed on the following vehicles:

  2018-2020 Jeep Grand Cherokee - Trackhawk
  Fitment confirmed with the following products:

  * WK2 Lower Front Guard

  WK2 Sump Protection Plate

  WK2 Nudge Bar

  WK2 Recovery Point

  WK2 Recovery Hook

  Warn Zeon 10-S Platinum

  Smittybilt Gen2 X20 Comp (10,000lb)

  ** OEM Tow Hooks (part# 82212095)

  
  

  * Fitment with Australian versions of the WK2 Lower Front Guard (purchased before March 2017), requires (2) metal tabs be cut-removed from the centre section of the WK2 Lower Front Guard. This modification is not required for USA model WK2 Lower Front Guards or any WK2 Lower Front Guards purchased after March 2017.

  
  

  ** You can install OEM Tow Hooks OR the WK2 Lower Front Guard with the WK2 Hidden Winch Mount. You cannot install OEM Tow Hooks AND the WK2 Lower Front Guard with the WK2 Hidden Winch Mount. For more information read our Support Article, (here).
  Does NOT fit with the following products:

  Jeep Australia Tow Hook (part# CH8220WKRH or AUSWK14HOOK)
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Can I Install The WK2 Hidden Winch Mount Myself?

  Forged In Australia?

  What Warranty Do You Provide?

  How Do You Remove The Lower Front Fascia?

  What's The Optimum Order Of Installation For Multiple WK2 Products?

  What Products Are Compatible With Luxury Model WK2s (Summit, High Altitude, SRT, etc.)?

  [COMING SOON] Can I Install These Products Together; WK2 Hidden Winch Mount + WK2 Lower Front Guard + OEM Tow Hooks?

  [COMING SOON] What Winches Do You Recommend?

  [COMING SOON] Do I Need A Wireless Winch?

  [COMING SOON] Will My Winch Fit?

  [COMING SOON] Will My Fairlead Fit?

Chief Products WK2 Chassis Mounts (Front) provide a secure connection to the front of your WK2 (Jeep Grand Cherokee 2011-2020). Engineered to distribute forces to the chassis of your WK2 over multiple mounting points (for maximum strength and reliability). These Chassis Mounts play a critical role in the Engineer Certified Ratings (10,000lbs WLL) of our WK2 Off-Road Front Bumper and WK2 Hidden Winch Mount. They've been FEA tested, tested by independent 3rd parties (including crash testing for ADR compliance) and real-world tested in numerous scenarios; including off-axis recoveries and snatch block recoveries. In other words, this is a product you can count on when you're stuck in the middle of nowhere and you need it most.

An installation kit for the WK2 Hidden Winch Mount. It provides the required mounting bracket & hardware for the Adaptive Cruise Control Camera.

An installation kit for the WK2 Hidden Winch Mount. It provides the required mounting brackets & hardware for installation of OEM Tow Hooks with WK2 Hidden Winch Mount.

* Please note; this kit will not allow installation of OEM Tow Hooks with any other product. It only provides compatibility for the WK2 Hidden Winch Mount (when the WK2 Hidden Winch Mount is installed on its own).

Chief Products Light Bar Mount KIT provides an easy way to mount larger-deeper light bars on Chief Products WK2 Nudge Bar. Some light bars (with a lot of depth) need to be moved forward to avoid touching the grille, especially on 2013-2015 WK2s. Our Light Bar Mount KIT, moves the light bar forward while also providing extra mounting strength.

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 Off-Road Front Bumper delivers world-class off-road protection for the front of your WK2 (Jeep Grand Cherokee, 2011-2020). Engineered to integrate fully with the styling and function of your WK2. The WK2 Off-Road Front Bumper's modular design allows you to build exactly what you need, while delivering industry-leading performance in several important categories; improved approach angle (for better off-road performance), high-volume airflow (critical for towing & off-road performance), industry leading corrosion protection (E-Coat, SS316 Fasteners & Aluminium Alloy Accessories), low installed weight (providing better fuel economy & improved suspension performance) and full compatibility with all safety systems (air bags, advanced parking sensors, adaptive cruise control, forward collision warning and lane departure warning). No matter what model WK2 you have, Chief Products WK2 Off-Road Front Bumper delivers exceptional off-road performance, and a degree of fit-and-finish you have to see in person to truly appreciate.

  We engineered the WK2 Off-Road Front Bumper from the ground up (and performed extensive real-world testing)to ensure we delivered a product you could count on when you need it most. Best of all, the modular design provides an unprecedented amount of configurability, allowing you to mix-and-match components to create the exact Off-Road Front Bumper you want. Want to install a winch? No problem. Want to install some off-road lights? No problem. Want a great place to mount your number plate? No problem (we give you 2 options). Want industry-leading recovery points? No problem. Want colour and accessory options, so the bar matches your style? No Problem. Just want to keep it super simple? No worries, we've got your back too. Build exactly what you want.

  FEATURES

  HIGH-STRENGTH

  VEHICLE INTEGRATED DESIGN (Compatible with all Vehicle Systems)

  MODULAR DESIGN (Provides Unprecedented Configurability)

  HIGH-VOLUME AIR-FLOW (Critical for Towing & Off-Road Performance)

  MAXIMUM QUALITY FASTENERS (Blackened + SS316 or High-Tensile)

  WEDGE-LOCK WASHERS (Blackened + SS316)

  DURABLE POWDER COAT FINISH (Advanced Polyester Thermosetting Powder)

  E-COAT (Industry Leading Corrosion Protection)

  EASY INSTALLATION (Difficulty = 5/10 or 6/10 for Summit)
  SPECIFICATIONS

  28.5kg	INSTALLED WEIGHT --> (BASE)
  33.3kg	INSTALLED WEIGHT --> Bare Bones Edition
  37.5kg	INSTALLED WEIGHT --> Overland Edition
  53.4kg	INSTALLED WEIGHT --> Tactical Edition (2011-2015)
  54.2kg	INSTALLED WEIGHT --> Tactical Edition (2016+)
  54.4kg	INSTALLED WEIGHT --> Stealth Edition (2011-2015) [LIMITED]
  55.2kg	INSTALLED WEIGHT --> Stealth Edition (2016+) [LIMITED]
  54.4kg	INSTALLED WEIGHT --> Apex Edition (2011-2015)
  55.2kg	INSTALLED WEIGHT --> Apex Edition (2016+)
  +0.1°	APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk)
  +6.5°	APPROACH ANGLE (Summit & SRT)

  *  Approach Angle calculations represent improvement over stock (based on stock tyres and air suspension in STD height). Raising the air suspension or installing larger tyres will increase the approach angle improvements.
  INCLUDES

  (BASE)

  1	(BASE)
  0	WK2 CHASSIS MOUNTS (Front) --> NOT INCLUDED (REQUIRED FOR INSTALL)
  1	Installation Instructions

  BARE BONES EDITION

  1	(BASE)
  1	WK2 CHASSIS MOUNTS (Front)
  1	WK2 OFF-ROAD FRONT BUMPER (Nomad Grille)
  1	Installation Instructions

  OVERLAND EDITION

  1	(BASE)
  1	WK2 CHASSIS MOUNTS (Front)
  1	WK2 OFF-ROAD FRONT BUMPER (Apex Grille) [SILVER]
  1	WK2 OFF-ROAD FRONT BUMPER (Mach II Aero-Bar) [SILVER]
  1	Installation Instructions

  TACTICAL EDITION (2011-2015)

  1	(BASE)
  1	WK2 CHASSIS MOUNTS (Front)
  1	WINCH CRADLE (2011-2015)
  1	WK2 OFF-ROAD FRONT BUMPER (Nomad Grille)
  1	WK2 OFF-ROAD FRONT BUMPER (Mach II Aero-Bar) [SILVER]
  1	WK2 OFF-ROAD FRONT BUMPER (Fusion Fairlead) [GUNMETAL]
  1	Installation Instructions

  TACTICAL EDITION (2016+)

  1	(BASE)
  1	WK2 CHASSIS MOUNTS (Front)
  1	WINCH CRADLE (2016+)
  1	WK2 OFF-ROAD FRONT BUMPER (Nomad Grille)
  1	WK2 OFF-ROAD FRONT BUMPER (Mach II Aero-Bar) [SILVER]
  1	WK2 OFF-ROAD FRONT BUMPER (Fusion Fairlead) [GUNMETAL]
  1	Installation Instructions

  STEALTH EDITION (2011-2015) [LIMITED]

  1	(BASE)
  1	WK2 CHASSIS MOUNTS (Front)
  1	WINCH CRADLE (2011-2015)
  1	WK2 OFF-ROAD FRONT BUMPER (Apex Grille) [BLACK]
  1	WK2 OFF-ROAD FRONT BUMPER (Mach II Aero-Bar) [BLACK]
  1	WK2 OFF-ROAD FRONT BUMPER (Fusion Fairlead) [BLACK]
  1	Installation Instructions

  STEALTH EDITION (2016+) [LIMITED]

  1	(BASE)
  1	WK2 CHASSIS MOUNTS (Front)
  1	WINCH CRADLE (2016+)
  1	WK2 OFF-ROAD FRONT BUMPER (Apex Grille) [BLACK]
  1	WK2 OFF-ROAD FRONT BUMPER (Mach II Aero-Bar) [BLACK]
  1	WK2 OFF-ROAD FRONT BUMPER (Fusion Fairlead) [BLACK]
  1	Installation Instructions

  APEX EDITION (2011-2015)

  1	(BASE)
  1	WK2 CHASSIS MOUNTS (Front)
  1	WINCH CRADLE (2011-2015)
  1	WK2 OFF-ROAD FRONT BUMPER (Apex Grille) [SILVER]
  1	WK2 OFF-ROAD FRONT BUMPER (Mach II Aero-Bar) [SILVER]
  1	WK2 OFF-ROAD FRONT BUMPER (Fusion Fairlead) [SILVER]
  1	Installation Instructions

  APEX EDITION (2016+)

  1	(BASE)
  1	WK2 CHASSIS MOUNTS (Front)
  1	WINCH CRADLE (2016+)
  1	WK2 OFF-ROAD FRONT BUMPER (Apex Grille) [SILVER]
  1	WK2 OFF-ROAD FRONT BUMPER (Mach II Aero-Bar) [SILVER]
  1	WK2 OFF-ROAD FRONT BUMPER (Fusion Fairlead) [SILVER]
  1	Installation Instructions

  EDITIONS

  (BASE)

  COMING SOON (more info soon).

  BARE BONES EDITION

  COMING SOON (more info soon).

  OVERLAND EDITION

  COMING SOON (more info soon).

  TACTICAL EDITION (2011-2015)

  COMING SOON (more info soon).

  TACTICAL EDITION (2016+)

  COMING SOON (more info soon).

  STEALTH EDITION (2011-2015) [LIMITED]

  COMING SOON (more info soon).

  STEALTH EDITION (2016+) [LIMITED]

  COMING SOON (more info soon).

  APEX EDITION (2011-2015)

  COMING SOON (more info soon).

  APEX EDITION (2016+)

  COMING SOON (more info soon).
• HIGH-STRENGTH OFF-ROAD PROTECTION

  EXCELLENT APPROACH ANGLE

  HIGH-FLOW COOLING PERFORMANCE

  LOW INSTALLED WEIGHT

  VEHICLE INTEGRATED DESIGN

  UNPRECEDENTED CONFIGURABILITY

  INNOVATIVE SUITE OF ACCESSORIES

  EASILY MOUNT ACCESSORIES

  VEHICLE COMPATIBILITY

  COMPATIBLE with ALL VEHICLE SYSTEMS

  COMPATIBLE with FRONT RECOVERY POINTS

  COMPATIBLE with MOST WINCHES

  STYLE

  FIT & FINISH

  EASY TO INSTALL

  INDUSTRY LEADING CORROSION PROTECTION

  MAXIMUM QUALITY FASTENERS

  REAL WORLD TESTING

  TOP QUALITY FINISHING TOUCHES
• Bolts to existing mounting points on the chassis. No drilling or cutting of metal parts required. Installation requires cutting/modification of the plastic bumper.
  Fitment confirmed on the following vehicles:

  2011 Jeep Grand Cherokee --> (All Models & Limited Editions)

  2012 Jeep Grand Cherokee --> (All Models & Limited Editions)

  2013 Jeep Grand Cherokee --> (All Models & Limited Editions)

  2014 Jeep Grand Cherokee --> (All Models & Limited Editions)

  2015 Jeep Grand Cherokee --> (All Models & Limited Editions)

  2016 Jeep Grand Cherokee --> (All Models & Limited Editions)

  2017 Jeep Grand Cherokee --> (All Models & Limited Editions)

  2018 Jeep Grand Cherokee --> (All Models & Limited Editions)

  2019 Jeep Grand Cherokee --> (All Models & Limited Editions)

  2020 Jeep Grand Cherokee --> (All Models & Limited Editions)

  2021 Jeep Grand Cherokee --> (All Models & Limited Editions)

  *  Fits USA & Export models.

  **  Fitment on Laredo, Limited, Overland & Trailhawk (including all models with same lower front fascia) requires permanent removal of the lower front fascia and minimal cutting of the plastic bumper.

  ***  Fitment on Summit, High Altitude & SRT (including all models with same lower front fascia) requires permanent removal of the lower front fascia and extensive cutting of the plastic bumper (lower portion).
  Fitment unconfirmed on the following vehicles:

  2018-2020 Jeep Grand Cherokee - Trackhawk
  Fitment confirmed with the following products:

  WK2 SUMP PROTECTION PLATE

  WK2 RECOVERY POINT

  WK2 RECOVERY HOOK

  WK2 WINCH CRADLE

  WK2 CHASSIS MOUNTS (Front)   Manufactured after MAY 2021 (SKU = CP217000-1000-00-R03)
  Product does NOT fit with the following products:

  WK2 LOWER FRONT GUARD

  WK2 NUDGE BAR

  WK2 CHASSIS MOUNTS (Front)   Manufactured before MAY 2021 (SKU = CP217000-1000-00-R02)

  WK2 HIDDEN WINCH MOUNT (Mounting Brackets)   (SKU = CP217000-1000-00-R01)

  JEEP AUSTRALIA TOW HOOK  (part# CH8220WKRH or AUSWK14HOOK)

  *  WK2 OFF-ROAD FRONT BUMPER does not fit with WK2 LOWER FRONT GUARD or WK2 NUDGE BAR. It is designed as an alternative to these products.
  INSTALLATION INSTRUCTIONS

  [DOWNLOAD]
• Can I Install The WK2 OFF-ROAD FRONT BUMPER Myself?

  Forged In Australia?

  What Warranty Do You Provide?

  How Do You Remove The Lower Front Fascia?

  What's The Optimum Order Of Installation For Multiple WK2 Products?

  What Products Are Compatible With Luxury Model WK2s (Summit, High Altitude, SRT, etc.)?

  COMPATIBILITY --> OEM TOW HOOKS

  [COMING SOON] What Winches Do You Recommend?

  [COMING SOON] Do I Need A Wireless Winch?

  [COMING SOON] Will My Winch Fit?

  [COMING SOON] Will My Fairlead Fit?

Chief Products Hawse Winch Fairlead delivers slim lines, large smooth radiuses (perfect for synthetic ropes) and a mirror polish finish. For maximum strength each fairlead is CNC machined from a solid billet of 6061 T6 Aluminium. We then perform high-speed machine polishing to ensure every surface is smooth and radiant. As a final process to protect the finish and deliver maximum protection from the elements, each fairlead receives 20µm of Type II Anodising. To truly appreciate the quality workmanship, you need to hold one in your hand. Best of all, we provide (2) colours so you can choose the style that looks best on your machine.

An installation kit for the WK2 Off-Road Front Bumper. It provides the required mounting bracketry & hardware for the Adaptive Cruise Control Camera.

Chief Products WK2 Nudge Bar (Mounting Arms Upgrade KIT) allows customers with an older WK2 Nudge Bar (purchased before October 2019) to upgrade to the latest Mounting Arms. These new Mounting Arms provide more adjustment, allowing customers to mount their WK2 Nudge Bar closer to (or farther from) the vehicle. Mounting closer to the vehicle can be helpful when having troubles with the parking sensor system. Mounting farther from the vehicle can be helpful when a customer needs more space to mount larger off-road lights.