Aurora 20" Dual Row LED Light Bar provides heaps of light in an extremely durable, IP69K, military spec package. We performed rigorous testing on numerous light bars and when the dust settled the Aurora was the hands down winner. It provides top quality durability, heaps of light and an excellent beam pattern. Submerge it, freeze it, drive over it, shoot it with high pressure water... this is one tough light bar!

• OVERVIEW
• FAQs

• Chief Products Bolt Head Protectors (Slotted) are specifically designed to integrate with our product line. They provide a simple and effective way to protect exposed bolt heads underneath your WK2. The angled sides protect the bolt head from rocks and other off-road obstacles that would normally cause damage. The slotted design keys into the product and locks it into place when the bolt is tightened, eliminating any chance the bolt head protector can spin or move when hit off-road. Each one is manufactured out of 6061 Aluminium to protect against corrosion and the harsh life they're sure to encounter under your 4x4. Best of all, they install easily like a normal washer.

  PLEASE NOTE - This product is designed to work exclusively with our product line. For a Bolt Head Protector that can be used anywhere try our - Bolt Head Protector (Standard).

  FEATURES
  6061 Aluminium (Excellent Corrosion Resistance)
  Easy Installation (Difficulty = 1/10)
  SIZES

  M6 - Fits M6 Bolts

  M8 - Fits M8 Bolts
• Forged In Australia?

  What Warranty Do You Provide?

• OVERVIEW
• FAQs

• Chief Products Bolt Head Protectors (Standard) are a simple and effective way to protect exposed bolt heads underneath your 4x4. The angled sides protect the bolt head from rocks and other off-road obstacles that would normally cause damage. The extra width and thickness of the design makes them an extremely stout washer (that can distribute clamping force over a greater area). Each one is manufactured out of 6061 Aluminium to protect against corrosion and the harsh life they're sure to encounter under your 4x4. Best of all, they install easily like a normal washer.

  FEATURES
  6061 Aluminium (Excellent Corrosion Resistance)
  Easy Installation (Difficulty = 1/10)
  SIZES

  M6 (38mm) - Fits M6 Bolts (38mm outside diameter)

  M8 (38mm) - Fits M8 Bolts (38mm outside diameter)
• Forged In Australia?

  What Warranty Do You Provide?

Chief Products Hawse Winch Fairlead is designed with slim lines and a mirror polish finish that fits perfectly on the WK2. Machined from a solid block of aluminium and then polished - it is light, durable, and with large radius edges on both sides it is perfect for synthetic ropes.

Designed and field tested by Chief Products Basecamp Team - Mudgeeraba, Australia.

Planks are a key building block of our modular roof rack system. This KIT includes (2) Planks; measuring 1146mm (45.12") long, 156mm (6.14”) wide and an amazing 25mm (0.98”) thin. Our Planks are designed so they can be easily bolted to our Mounting Rails in various configurations. This allows our customers to create a ‘Roof Platform’ that best suits their needs. It also enables our customers to easily add/move/change their Planks to meet whatever future needs may arise. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to bolt/fasten to the Plank at any point along the entire length of the Plank.

We utilise a proprietary Aircraft-Grade Aluminium Alloy and an advanced Extrusion Manufacturing Process that allows us to deliver Planks with an extremely high strength-to-weight ratio. As an example, one of our Planks can easily hold a 300kg person (standing directly in the middle of a 1.2M Plank) and it only weighs 2.5kg.

Our Tie-Down Plates are engineered to provide numerous ways to secure gear and accessories to your roof rack. They clamp securely between our Planks in a way that allows them to easily move and fasten anywhere along the entire length of the Planks. Manufactured from Aircraft-Grade Aluminium Alloys and High-Strength Steel, they're extremely strong to meet the high demands they're sure to encounter. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M8 & M10) that can be used to fasten/bolt just about any accessory you can find. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your platform.

Our Plank End-Caps provide a nice finish to the ends of our Planks and are great for anyone that isn't running our WK2 Roof Rack (Platform Frame KIT). This KIT includes (4) Plank End-Caps, (enough for 2x Planks). They bolt on easily and feature 7 slots (just like a traditional Jeep grille).

Our Roof Top Tent KIT is designed to make installation of your Roof Top Tent super easy. The KIT includes (4) Roof Top Tent Brackets made from 5mm steel. These brackets, along with the mounting hardware from your RTT, enable you to easily and securely clamp your Roof Top Tent onto our Planks.

This T-Nut KIT includes (5) M8 T-Nuts and (5) M10 T-Nuts that are specially engineered for maximum performance and compatibility with the Chief Products roof rack system. Designed to fit perfectly within our Planks and Tie-Down Plates. These high-tensile 10.9 Grade T-Nuts can handle anything you throw at them. Blackened to look great when installed, and coated in Black Oxide to ensure they stay that way even in the most hostile environments.

The classic shop rag is all about function. Perfect for wiping grease off your hands in the garage or a bit of mud off your favourite tools in the bush. We print these classic rags with a special ink that is extremely rugged and resistant to grease and oil. Stuff them in a tool bag or the back of your garage. They're simple, durable and ready to withstand the tough life they're sure to encounter.

Designed and field tested by Chief Products Basecamp Team - Mudgeeraba, Australia.

A collection of high quality stickers, providing guaranteed style on the fly. Perfect for use on internal combustion machines, windows, camping gear and small children.

Designed and field tested by Chief Products Basecamp Team - Mudgeeraba, Australia.

We designed this classic trucker for the Chief Products team and those who share our appetite for adventure. It features heavy-duty nylon mesh on the back, with Chief Products classic logo up front. Plastic snap adjuster, one size fits most.

Designed and field tested by Chief Products Basecamp Team - Mudgeeraba, Australia.

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 Hidden Winch Mount provides a high-strength place to mount your winch without ruining your Jeep's good looks. We've engineered a winch mounting system that can remain completely hidden while still being 100% compatible with the all of your Jeep's safety systems, (adaptive cruise control, forward collision warning, parking sensor systems, etc.). It delivers numerous industry leading features - including an engineer certified 10,000lb max rating, E-Coat Corrosion Protection and a very low 12.85kg install weight. By positioning the winch between the chassis structure (lower than our competitors) we're able to provide significantly improved cooling, better off-axis strength, as well as more space for larger winches. Best of all, we spent (12) months performing rigorous real world testing to ensure you can rely on our winch mounting system when you need it most.

  FEATURES

  High-Strength 350 Grade Steel

  E-Coat (Industry Leading Corrosion Protection)

  Durable Powder Coat Finish (Satin Black)

  Drainage Slots

  Easy Installation (Difficulty = 4/10)
  SPECIFICATIONS

  10,000lbs Max Rating [Engineer Certified]

  Fully Installed Weight = 12.85kg (approximate without winch)

  Approach Angle = Same As Stock
  INCLUDES

  1	Winch Cradle
  2	Cradle-Frame Mounts
  2	Chassis Support Brackets
  2	Chassis Mounting Plates
  2	Bonnet Supports
  6	M12 x 35mm High Tensile (10.9) Bolts (Zinc Plated)
  4	M10 x 40mm High Tensile (10.9) Bolts (Zinc Plated)
  4	M8 x 100mm (10.9) Bolts (Zinc Plated)
  4	M8 x 25mm (10.9) Bolts (Zinc Plated)
  2	M6 x 25mm (10.9) Bolts (Zinc Plated)
  2	M6 x 216mm (10.9) Bolts (Zinc Plated)
  6	M12 Wedge-Lock Extended Washers (Zinc Flake Coating)
  4	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  8	M8 Wedge-Lock Extended Washers (Zinc Flake Coating)
  4	M6 Wedge-Lock Extended Washers (Zinc Flake Coating)
  1	4g pouch Anti-Seize
  Installation Instructions

  OPTIONS

  2011-2015 (HYDRAULIC STEER)

  All WK2s before 2016 with hydraulic steering.

  2016+ (ELECTRIC STEER)

  All WK2s after 2015 with electric steering.

  [MOUNTING BRACKETS ONLY]

  Only the Mounting Brackets, no cradle included.
  EXTRAS

  ACC Camera Kit

  Mounting bracket & hardware for WK2s equipped with Adaptive Cruise Control.

  Air Suspension Kit

  Mounting bracket & hardware for WK2s equipped with Quadra-Lift Air Suspension.

  WK2 Lower Front Guard Kit

  Mounting bracket that provides extra strength to the WK2 Lower Front Guard, (recommended, but not required).

  OEM Tow Hooks Kit

  Mounting bracket & hardware for installation of OEM Tow Hooks with WK2 Hidden Winch Mount. Please note, this kit will not allow installation of OEM Tow Hooks with the WK2 Lower Front Guard, (see fitment tab for more information).

  Hawse Winch Fairlead

  Designed with slim lines, large radius edges and a mirror polish finish that fits perfectly on WK2s.
• High-Strength

  Made from 3mm, 5mm, 6mm & 8mm High-Strength 350 Grade Steel. Mounted to the chassis in multiple locations to ensure recovery forces are evenly distributed and don't overload the chassis mounting points. Through FEA computer modelling and 12 months of real world testing we've delivered a high-strength winch mounting system that you can rely on when you need it most.

  
  

  Maintain OEM Appearance

  The WK2 Hidden Winch Mount can be installed behind your bumper and lower front fascia, maintaining the great looks of your Jeep Grand Cherokee. Then if you want to, you can easily remove the lower front fascia when heading off-road.

  
  

  Low Installed Weight

  Only 12.85kg when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) - 90kgs (steel).

  
  

  Lower Winch Position

  Our lower winch position provides numerous benefits. Ability to install taller winches, better cooling to the radiator, doesn’t interfere with license plate mounting, as well as positioning the winch directly between the frame rails for maximum strength.

  
  

  Maximum Approach Angle

  Since our design doesn't extend past the front of your WK2, the maximum approach angle is retained.

  
  

  Compatible With Adaptive Cruise Control

  Through careful engineering & testing we've delivered a winch mount that is compatible with the adaptive cruise control system on all WK2 models.

  
  

  Compatible With Parking Sensors

  Through careful engineering & testing we've delivered a winch mount that is compatible with parking sensors on all WK2 models.

  
  

  Compatible With Our Entire Product Line

  Already own our WK2 Lower Front Guard, WK2 Sump Protection Plate, WK2 Recovery Hooks, WK2 Recovery Points or WK2 Nudge Bar? We’ve designed the WK2 Hidden Winch Mount to easily work with all of our products.

  
  

  Compatible With Excellent Front Recovery Options

  Can be installed with OEM Tow Hooks or Chief Products WK2 Recovery Hooks & WK2 Recovery Points, (which are engineer rated to 4,500kg [1.5 GVM]).

  
  

  Industry Leading Corrosion Protection

  We utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process.

  
  

  Real World Testing

  There aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.

  
  

  Top Quality Finishing Touches

  We include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
• Bolts into existing mounting points in the frame, no drilling or cutting required. Installation of lower front fascia requires cutting a hole for the winch fairlead.
  WK2 Hidden Winch Mount fits the following vehicles:

  2011 Jeep Grand Cherokee - All Models & Limited Editions

  2012 Jeep Grand Cherokee - All Models & Limited Editions

  2013 Jeep Grand Cherokee - All Models & Limited Editions

  2014 Jeep Grand Cherokee - All Models & Limited Editions

  2015 Jeep Grand Cherokee - All Models & Limited Editions

  2016 Jeep Grand Cherokee - All Models & Limited Editions

  2017 Jeep Grand Cherokee - All Models & Limited Editions

  2018 Jeep Grand Cherokee - All Models & Limited Editions

  2019 Jeep Grand Cherokee - All Models & Limited Editions

  2020 Jeep Grand Cherokee - All Models & Limited Editions

  
  

  * Fits USA & Export models.

  ** Fitment on Summit & High Altitude (including all models with same lower front fascia) requires permanent removal of the lower front fascia.

  *** Fitment on SRT requires cutting/modification of the lower front fascia, as well as relocation of the power steering cooler (no bracketry is provided for power steering cooler relocation).
  Fitment unconfirmed on the following vehicles:

  2018-2020 Jeep Grand Cherokee - Trackhawk
  Fitment confirmed with the following products:

  * WK2 Lower Front Guard

  WK2 Sump Protection Plate

  WK2 Nudge Bar

  WK2 Recovery Point

  WK2 Recovery Hook

  Warn Zeon 10-S Platinum

  Smittybilt Gen2 X20 Comp (10,000lb)

  ** OEM Tow Hooks (part# 82212095)

  
  

  * Fitment with Australian versions of the WK2 Lower Front Guard (purchased before March 2017), requires (2) metal tabs be cut/removed from the centre section of the WK2 Lower Front Guard. This modification is not required for USA model WK2 Lower Front Guards or any WK2 Lower Front Guards purchased after March 2017.

  
  

  ** You can install OEM Tow Hooks OR the WK2 Lower Front Guard with the WK2 Hidden Winch Mount. You cannot install OEM Tow Hooks AND the WK2 Lower Front Guard with the WK2 Hidden Winch Mount. For more information read our Support Article, (here).
  Does NOT fit with the following products:

  Jeep Australia Tow Hook (part# CH8220WKRH or AUSWK14HOOK)
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Can I install the WK2 Hidden Winch Mount myself?

  Can I install these products together, (WK2 Hidden Winch Mount + WK2 Lower Front Guard + OEM Tow Hooks)? [COMING SOON]

  What winches do you recommend? [COMING SOON]

  Will my winch fit? [COMING SOON]

  Will my winch fairlead fit? [COMING SOON]

  Do I need a wireless winch? [COMING SOON]

  What's the optimum order of installation for multiple products?

  How do you remove the lower front fascia?

  What products are compatible with Summit & High Altitude?

  Forged In Australia?

  What Warranty Do You Provide?

An installation kit for the WK2 Hidden Winch Mount. It provides the required mounting bracket & hardware for the Adaptive Cruise Control Camera.

An installation kit for the WK2 Hidden Winch Mount. It provides the required mounting bracket & hardware for the Quadra-Lift Air Suspension.

An installation kit for the WK2 Hidden Winch Mount. It provides a strengthening bracket for the WK2 Lower Front Guard. This bracket is recommended, but not required.

An installation kit for the WK2 Hidden Winch Mount. It provides the required mounting brackets & hardware for installation of OEM Tow Hooks with WK2 Hidden Winch Mount.

* Please note, this kit will not allow installation of OEM Tow Hooks with any other product. It only provides compatibility for the WK2 Hidden Winch Mount, when the WK2 Hidden Winch Mount is installed on its own.

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 Lower Front Guard is engineered to protect the critical components at the lower front of your WK2 without ruining your Jeep's good looks. Weighing only 15kg (approx.) when fully installed, it provides off-road protection for the Lower Radiator Core, ACC Camera, Windshield Washer Bottle and Air Suspension Controller. It features a centre section made from 5mm high-strength steel for unparalleled strength, while still providing critical airflow to the lower radiator core. Bolted directly to the sub-frame it provides the very best approach angle possible, and our Slotted Bolt Head Protectors protect the front mounting bolts from off-road damage. Best of all, we've designed the WK2 Lower Front Guard so it installs behind the removable lower front fascia, providing full protection off-road while still allowing you to maintain a factory appearance on-road.

  We've created a modular system of protection products for the WK2, this means our WK2 Lower Front Guard will integrate perfectly with all of our other products - WK2 Hidden Winch Mount, WK2 Sump Protection Plate, WK2 Nudge Bar, WK2 Recovery Hook and WK2 Recovery Point.

  FEATURES

  High-Strength Steel

  E-Coat (Industry Leading Corrosion Resistance)

  Durable Powder Coat Finish (Textured Black)

  Drainage Slots

  Airflow Slots

  Easy Installation (Difficulty = 4/10)
  SPECIFICATIONS

  Standard Guard = 14.90kg (Including Mounting Hardware)

  ACC Guard = 15.20kg (Including Mounting Hardware)

  Approach Angle = Same As Stock
  INCLUDES

  1	Centre Section (5mm High-Strength Steel)
  2	Chassis Mounting Brackets
  2	Corner Mounting Brackets
  2	Corner Guards
  1	Standard Guard or ACC Guard
  1	Air Dam Reinforcement Bracket
  4	M6 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083)
  2	M8 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083)
  4	M10 x 20mm High Tensile (10.9) Bolts (Zinc Plated)
  2	M8 x 100mm High Tensile (10.9) Bolts (Zinc Plated)
  2	M8 x 30mm High Tensile (8.8) Bolts (Zinc Plated)
  14	M8 x 25mm High Tensile (8.8) Bolts (Black Zinc Plated)
  4	M6 x 40mm High Tensile (10.9) Bolts (Zinc Plated)
  4	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  18	M8 Wedge-Lock Extended Washers (Zinc Flake Coating)
  4	M6 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	M8 x 8mm Bushings (6061 Aluminium)
  4	M6 Nutserts (Stainless Steel)
  1	4g pouch Anti-Seize
  Installation Instructions

  OPTIONS

  Standard Guard

  For WK2s without ACC (Adaptive Cruise Control).

  ACC Guard

  For WK2s with ACC (Adaptive Cruise Control).

  [NO CENTRE GUARD]

  Base unit with no Centre Guard.
• Off-Road Protection

  Off-road protection for the Lower Radiator Core, ACC Camera, Windshield Washer Bottle and Air Suspension Controller. Accomplished via high-strength 350 grade steel that is 5mm thick on the main centre section.

  
  

  Maintain OEM Appearance

  The lower front fascia can be easily installed over the WK2 Lower Front Guard, maintaining the great looks of the Jeep Grand Cherokee while driving around town. Then when you're heading off-road, you can easily remove the lower front fascia via (5) 1/4 turn fasteners to reveal the WK2 Lower Front Guard.

  
  

  Low Installed Weight

  Only 15kg (approx.) when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) - 90kgs (steel).

  
  

  Maximum Approach Angle

  Since our design doesn't extend past the front of your WK2, the maximum approach angle is retained.

  
  

  Compatible With Excellent Front Recovery Options

  Can be installed with OEM Tow Hooks (if available for your WK2) or Chief Products WK2 Recovery Hooks & WK2 Recovery Points, (which can be installed on driver & passenger sides and are engineer rated to 4,500kg [1.5 GVM]).

  
  

  Easily & Inexpensively Repaired

  Because we designed the WK2 Lower Front Guard as a set of components, if you damage one part, you can easily and cost effectively replace just that part.

  
  

  Low Cost

  Significantly less expensive than a Bull Bar, especially when you include shipping and installation costs.

  
  

  Easy To Install

  We provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can install this yourself.

  
  

  Industry Leading Corrosion Protection

  We utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process.

  
  

  Bolt Head Protection

  Our Bolt Head Protectors are engineered to keep critical bolt heads protected from off-road obstacles. They feature a slotted design that keys directly into the product with no possibility of spinning or moving when hit off-road.

  
  

  Real World Testing

  There aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.

  
  

  Top Quality Finishing Touches

  We include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
• Bolts into existing mounting points in the frame, no drilling or cutting needed.
  WK2 Lower Front Guard fits the following vehicles:

  2011 Jeep Grand Cherokee - All Models & Limited Editions

  2012 Jeep Grand Cherokee - All Models & Limited Editions

  2013 Jeep Grand Cherokee - All Models & Limited Editions

  2014 Jeep Grand Cherokee - All Models & Limited Editions

  2015 Jeep Grand Cherokee - All Models & Limited Editions

  2016 Jeep Grand Cherokee - All Models & Limited Editions

  2017 Jeep Grand Cherokee - All Models & Limited Editions

  2018 Jeep Grand Cherokee - All Models & Limited Editions

  2019 Jeep Grand Cherokee - All Models & Limited Editions

  2020 Jeep Grand Cherokee - All Models & Limited Editions

  
  

  * Fits USA & Export models.

  ** Fitment on Summit & High Altitude (including all models with same lower front fascia) requires permanent removal of the lower front fascia.

  *** Fitment on SRT requires cutting/modification of the lower front fascia.
  Fitment unconfirmed on the following vehicles:

  2018-2020 Jeep Grand Cherokee - Trackhawk
  Fitment confirmed with the following products:

  WK2 Sump Protection Plate

  WK2 Hidden Winch Mount

  WK2 Nudge Bar

  WK2 Recovery Point

  WK2 Recovery Hook

  Uneek WK2 Grand Cherokee Bash Plate

  Rocky Road Bumper Kits & Winch Mounting Kits (2011 - 2018 WK2s)

  OEM Tow Hooks (part# 82212095)
  Does NOT fit with the following products:

  Jeep Australia Tow Hook (part# CH8220WKRH or AUSWK14HOOK)

  Jeep Belly Pan (part# 68089029AC)
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Does my Jeep Grand Cherokee need a WK2 Lower Front Guard? [COMING SOON]

  How do I determine which version I need? [COMING SOON]

  Can I drive with the OEM lower plastic fascia removed? [COMING SOON]

  Do I need new front springs to accommodate the additional weight? [COMING SOON]

  Can I install the WK2 Lower Front Guard myself?

  How does the WK2 Lower Front Guard compare to a Bull Bar?

  How do you remove the lower front fascia?

  What products are compatible with Summit & High Altitude?

  WK2 Lower Front Guard - Revision History [COMING SOON]

  Forged In Australia?

  What Warranty Do You Provide?

An installation kit for the WK2 Lower Front Guard. It provides the appropriate centre guard for the WK2 Lower Front Guard centre section.

* Includes all required installation hardware.