ROOF RACK (4x Plank End-Caps)
by: Chief Products
Out of Stock Pre-Order $29.99 USD
Notify Me
Give us a few of your details and we'll notify you when this product is available.
Success!
You'll be notified when the product becomes available again.
Oops!
Something went wrong. Please try again later.
Chief Products ROOF RACK (Plank End-Caps) provide a nice finish to the ends of our Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Plank End-Caps; enough for (2) Planks. They bolt on easily and feature (7) slots.
Chief Products ROOF RACK (Plank End-Caps) provide a nice finish to the ends of our Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Plank End-Caps; enough for (2) Planks. They bolt on easily and feature (7) slots.
Share:
- SStorm S.Verified BuyerI recommend this productRated 5 out of 5 stars3 years ago7 Slots, See what they did there?
Did you ever know why the Jeep has a 7 slot grill? It's because that Jeep was the first vehicle to be on all seven continents and you can see CHIEF paid attention to this. These drastically help reduce the wind noise if you're not running the frame kit.
Was this helpful?
Related Items
ROOF RACK (2x Planks) [1146mm]
Out of Stock Pre-Order $199.99 USD
Chief Products ROOF RACK (Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to easily bolt accessories to the Plank at any point along the entire length.
Chief Products ROOF RACK (Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to easily bolt accessories to the Plank at any point along the entire length.
We provide (2) Planks; each measuring 1146mm (45.12") long, 156mm (6.14") wide, and an amazing 25mm (0.98") thin. We utilise a proprietary Aircraft-Grade Aluminium Alloy and an advanced Extrusion Manufacturing Process that allows us to deliver Planks with an extremely high strength-to-weight ratio.
1146mm | PLANK LENGTH (45.12 inches) |
156mm | PLANK WIDTH (6.14 inches) |
25mm | PLANK THICKNESS (0.98 inches) |
2.52kg | INSTALLED WEIGHT --> 1 Plank |
Keep me updated
Give us a few of your details and we'll keep you updated on this product.
Notify Me
Give us a few of your details and we'll notify you when this product is available.
ROOF RACK (2x Tie-Down Plates)
Out of Stock Pre-Order $69.99 USD $76.99 USD
Chief Products ROOF RACK (Tie-Down Plates) are engineered to provide multiple ways to secure gear and accessories to your roof rack. They clamp securely between our Planks in a way that allows them to easily locate anywhere along the entire length of the Planks.
Manufactured from Aircraft-Grade Aluminium Alloys and High-Strength Steel, they're extremely strong to meet the high demands they're sure to encounter. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to easily secure any accessories you need. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your roof rack.
Chief Products ROOF RACK (Tie-Down Plates) are engineered to provide multiple ways to secure gear and accessories to your roof rack. They clamp securely between our Planks in a way that allows them to easily locate anywhere along the entire length of the Planks.
Manufactured from Aircraft-Grade Aluminium Alloys and High-Strength Steel, they're extremely strong to meet the high demands they're sure to encounter. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to easily secure any accessories you need. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your roof rack.
115mm | TIE-DOWN PLATE LENGTH (4.53 inches) |
110mm | TIE-DOWN PLATE WIDTH (4.33 inches) |
0.50kg | INSTALLED WEIGHT |
TIE-DOWN STRAP HOOK on CENTRE SECTION |
ROPE pass through CENTRE SECTION |
(2) T-NUT SLOTS --> M8 BOLT into M8 T-NUT (upper location between plates; includes room for bolt pass through) |
(2) T-NUT SLOTS --> M10 BOLT into M10 T-NUT (upper location between plates; includes room for bolt pass through) |
(2) T-NUT SLOTS --> M8 BOLT into M8 T-NUT (HEAVY DUTY --> lower location below both plates; includes room for bolt pass through) |
(2) T-NUT SLOTS --> M10 BOLT into M10 T-NUT (HEAVY DUTY --> lower location below both plates; includes room for bolt pass through) |
(2) T-NUT SLOTS --> M12 CARRIAGE BOLT into SQUARE HOLE (Lower Plate) (HEAVY DUTY --> up through lower plate) |
(2) T-NUT SLOTS --> M8, M10 & M12 BOLT pass through both PLATES (nut below lower plate) |
(2) M8 MOUNTING BOLTS --> REPLACE with LONGER MOUNTING BOLT (using weld nut on lower plate) |
Keep me updated
Give us a few of your details and we'll keep you updated on this product.
Notify Me
Give us a few of your details and we'll notify you when this product is available.
ROOF RACK (10x T-Nuts) [BLACK]
Out of Stock Pre-Order $29.99 USD
Motor Vehicle Carrying Rack AccessoriesChief Products ROOF RACK (T-Nuts) are engineered to provide maximum performance and compatibility with our Modular Roof Rack System. We offer our (10x) pack of T-Nuts in (3) sizes (M6, M8 & M10) to ensure you have the right size, no matter what accessory you're mounting. Designed to fit perfectly within our Planks, Half-Planks, and Tie-Down Plates. Our high-tensile (10.9) T-Nuts can handle anything you throw at them. Best of all, each T-Nut is protected with a rich black heavy-duty zinc-nickel plating, to ensure it will look great when installed, and stay that way even in the most hostile environments.
Chief Products ROOF RACK (T-Nuts) are engineered to provide maximum performance and compatibility with our Modular Roof Rack System. We offer our (10x) pack of T-Nuts in (3) sizes (M6, M8 & M10) to ensure you have the right size, no matter what accessory you're mounting. Designed to fit perfectly within our Planks, Half-Planks, and Tie-Down Plates. Our high-tensile (10.9) T-Nuts can handle anything you throw at them. Best of all, each T-Nut is protected with a rich black heavy-duty zinc-nickel plating, to ensure it will look great when installed, and stay that way even in the most hostile environments.
10 | T-Nuts [BLACK] [M6] |
10 | T-Nuts [BLACK] [M8] |
10 | T-Nuts [BLACK] [M10] |
Keep me updated
Give us a few of your details and we'll keep you updated on this product.
Notify Me
Give us a few of your details and we'll notify you when this product is available.
Keep me updated
Give us a few of your details and we'll keep you updated on this product.
Notify Me
Give us a few of your details and we'll notify you when this product is available.