• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products J200 Roof Rack provides the pinnacle of performance for roof rack systems on the J200 (Toyota LandCruiser 200, 2008-2021). It delivers industry-leading load ratings (150kg dynamic & 460kg static) and vehicle specific styling in a light-weight, low-profile design. Our Modular Roof Rack System provides an unrivalled amount of configurability. Customers can build the roof rack they want, and easily reconfigure it whenever their needs change. One configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). One roof rack; that can easily adapt to your needs.

  We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to keep the overall installed weight low and accomplish a degree of fit-and-finish you have to see in person to truly appreciate. The smooth top surface, low profile design and hidden fasteners have enabled us to deliver an extremely aerodynamic roof rack. Amazingly, even after thousands of kilometres of off-road driving, you won't hear any creaking or rattling. Best of all, we made it extremely easy to mount accessories - whether you're using t-nuts that slide the entire length of the Planks; or our industry-leading Tie-Down Plates that easily slide and clamp between the Planks. If you're looking for a top-quality place to carry extra gear on your next adventure, there's no doubt we've got you covered.

  FEATURES

  MODULAR DESIGN (Mix-And-Match Components)

  GROUNDBREAKING CONFIGURABILITY (Easily Move & Change Components)

  HIGH-STRENGTH (Industry-Leading Load Ratings)

  TOP-QUALITY MATERIALS (Aircraft-Grade Aluminium Alloys + High-Strength Steel)

  INDUSTRY-LEADING DURABILITY (High-Strength + Corrosion Protection + UV Stable Coatings)

  INDUSTRY-LEADING CORROSION PROTECTION (Special Coatings, Materials & Hardware)

  EASILY MOUNT ACCESSORIES (Adjustable Planks, T-Nuts & Tie-Down Plates)

  PREMIUM ACCESSORIES (Top-Quality, Innovative & 3rd Party Compatibility)

  VEHICLE SPECIFIC STYLING (Mounting Rails & Aero)

  STEALTH (Low Wind Noise + No Creaking/Rattling + Unobstructed Sunroof + Stealth Air Dam)

  TOP QUALITY FASTENERS (Blackened Stainless or High-Tensile + Wedge-Lock Washers)

  FIT & FINISH (Precision Manufacturing + Unrivalled QC Processes)

  EASY INSTALLATION (Difficulty = 2/10)
  SPECIFICATIONS

  100kg	DYNAMIC LOAD RATING (with 2x Half-Planks)
  300kg	STATIC LOAD RATING (with 2x Half-Planks)
  150kg	DYNAMIC LOAD RATING (with 2+ Planks)
  460kg	STATIC LOAD RATING (with 2+ Planks)
  86mm	OVERALL HEIGHT (above roof line)
  25mm	PLANK THICKNESS
  28.34mm	PLATFORM THICKNESS (fully assembled)
  2160mm	FULL PLATFORM LENGTH (fully assembled)
  1246mm	FULL PLATFORM WIDTH (fully assembled)
  14.4kg	INSTALLED WEIGHT --> Bare Bones
  14.4kg	INSTALLED WEIGHT --> Roof Top Tent [100-300kg]
  18.3kg	INSTALLED WEIGHT --> Roof Top Tent [150-460kg]
  22.2kg	INSTALLED WEIGHT --> Overland
  34.5kg	INSTALLED WEIGHT --> Safari
  42.7kg	INSTALLED WEIGHT --> Apex
  11.1kg	INSTALLED WEIGHT --> ((Build Your Own))

  INCLUDES

  
  

  BARE BONES
  

  1	J200 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (4x Half-Plank End-Caps)
  1	Installation Instructions

  
  

  ROOF TOP TENT [100-300kg]

  1	J200 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (4x Half-Plank End-Caps)
  1	Installation Instructions

  
  

  ROOF TOP TENT [150-460kg]

  1	J200 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Planks) [1146mm]
  1	ROOF RACK (4x Plank End-Caps)
  1	ROOF RACK (Roof Top Tent KIT)
  1	Installation Instructions

  
  

  OVERLAND

  1	J200 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Planks) [1146mm]
  1	ROOF RACK (4x Plank End-Caps)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (4x Half-Plank End-Caps)
  2	ROOF RACK (2x Tie-Down Plates)
  1	Installation Instructions

  
  

  SAFARI

  1	J200 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  4	ROOF RACK (2x Planks) [1146mm]
  4	ROOF RACK (4x Plank End-Caps)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (4x Half-Plank End-Caps)
  1	Installation Instructions

  
  

  APEX

  1	J200 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  4	ROOF RACK (2x Planks) [1146mm]
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (Platform Frame) [8.5 Plank]
  1	Installation Instructions

  
  

  ((BUILD YOUR OWN))

  1	J200 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	Installation Instructions

  EDITIONS

  
  

  BARE BONES
  

  We start with our Mounting Rails, then we add (2) Half-Planks and (4) Half-Plank End Caps. Super simple. Super strong (industry-leading load ratings for such a simple setup - 100kg dynamic & 300kg static). No non-sense. Want to upgrade to a Safari, Roof Top Tent, Overland or Apex edition? No Problem. Want to run with a simple setup that looks awesome, and works as advertised. This is it!

  
  

  ROOF TOP TENT [100-300kg]

  We've developed (2) editions of our J200 ROOF RACK for roof top tents. Our 100-300kg edition is the simplest and lightest version. Designed for customers that want a simple and easy setup for their roof top tent, and industry-leading load ratings (100kg dynamic & 300kg static). We start with our Mounting Rails, then we add (2) Half-Planks and (4) Half-Plank End-Caps. By using Half-Planks, we're able to keep the installed weight low, and make RTT installation super simple (most RTTs can easily clamp around our Half-Planks). Best of all, it's extremely easy to modify, upgrade or configure (just like every edition).

  
  

  ROOF TOP TENT [150-460kg]

  We've developed (2) editions of our J200 ROOF RACK for roof top tents. Our 150-460kg edition is the strongest version. Designed for customers that want the strongest setup for their roof top tent. We start with our Mounting Rails, then we add (2) Planks and (4) Plank End-Caps. Then we add our Roof Top Tent KIT, to make your RTT installation super easy. By using our standard Planks, we're able to provide industry-leading load ratings (150kg dynamic & 460kg static) in a package that looks great and is super easy to install. Best of all, it's extremely easy to modify, upgrade or configure (just like every edition).

  
  

  OVERLAND

  Our Overland edition is designed to provide maximum functionality when Overlanding. We start with our Mounting Rails, then add (2) Planks, (4) Plank End-Caps, (2) Half-Planks, (4) Half-Plank End-Caps, and finish with (4) Tie-Down Plates. The modular design, allows you to easily configure your roof rack components (Planks, Half-Planks, etc.) to suit the needs of your current adventure. The Tie-Down Plates are designed to be multi-functional. They can accommodate numerous accessories and tie-down strap configurations. This edition delivers industry leading load ratings (150kg dynamic & 460kg static) and a nearly unlimited amount of mounting locations for accessories.

  
  

  SAFARI

  Our Safari edition is all about delivering maximum functionality. We start with our Mounting Rails, then add (8) Planks, (16) End-Caps, (2) Half-Planks, and (4) Half-Plank End-Caps. The modular design, allows you to easily configure your roof rack components (Planks, Half-Planks, etc.) to suit the needs of your current adventure. This edition delivers industry-leading load ratings (150kg dynamic & 460kg static) and a nearly unlimited amount of mounting locations for accessories.

  
  

  APEX

  The pinnacle of roof rack performance for the J200. We start with our Mounting Rails, then add (8) Planks, (2) Half-Planks, and finish with our Platform Frame (smooth outside border that looks great, adds strength, and delivers the best aerodynamics possible). This edition delivers industry leading-load ratings (150kg dynamic & 460kg static) along with a nearly unlimited amount of mounting locations for accessories. Best of all, the Apex edition delivers industry-leading features with style (vehicle specific styling, smooth border, smooth top surface, amazing fit-n-finish, and fully hidden fasteners).

  
  

  ((BUILD YOUR OWN))

  Our Modular Roof Rack System allows customers to mix-and-match components to create the exact roof rack system they want. This edition starts with our Mounting Rails, and leaves the rest to you. You can add/change components to any of our roof rack editions, but if you want to build your roof rack from the ground up, this is the place to start.

  ---

  * WARNING *

  FOR MAXIMUM SAFETY DO NOT EXCEED MANUFACTURERS ROOF WEIGHT LIMITS. Our load ratings represent the maximum mechanical forces our roof rack system can withstand before failure. Our load ratings do not address vehicle safety during high-speed manoeuvres, or changes to vehicle dynamics caused by a higher centre of gravity.
  
  

  * CAUTION *

  For maximum safety, loads should be evenly distributed and properly secured to avoid shifting during transport. Before using your roof rack, it is important to familiarise yourself with the proper load securing techniques and be constantly safety oriented. Please note, all of our load ratings are based on an evenly distributed load.
• UNPRECEDENTED CONFIGURABILITY

  Choose how many Planks you want. Position your Planks wherever you want. Move your Planks easily, whenever you want. Choose if you want a frame around the outside. Choose how many Tie-Down Plates you want, and where you want them located. Configure your rack however you want. Numerous options. Numerous configurations.

  
  

  MODULAR DESIGN

  Our modular engineering approach allow us to deliver a roof rack system that can be easily adapted to any situation. It also means you can upgrade-downgrade your roof rack any time your needs require.

  
  

  HIGH-STRENGTH

  All versions deliver industry leading load ratings. These ratings were independently tested and the test results are certified to comply with Australian Standard (AS 1235-2000) as well as international standards (ISO / PAS 11154 : 2009:2006) and (DIN 75302/02: 1991). During independent testing, our roof rack system successfully withstood 330kg of upward force, 600kg of forward force (including a special 20° off-axis test). To achieve our certification we needed to have less than 10mm of movement in our structure at the tested loads, we had 0.17mm!
  
  One of the keys to our industry leading load ratings is our Mounting Rails. Not only do they transfer forces to the strongest points on the vehicle roof, they also utilise a boxed design that resists deformation at any singular point. This unique design element creates a 'mounting system’ that is much stronger than any of our competitors.

  
  

  LOW WEIGHT

  We utilise the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a roof rack system with an extremely high strength-to-weight ratio. This means our roof rack has an extremely low weight, while still being the very strongest on the market.

  
  

  STEALTH

  Chief Products roof racks are engineered to be extremely aerodynamic (smooth top surface, low profile design and hidden fasteners). These unique aerodynamic features make our roof racks extremely quiet for the majority of our customers. However, the more wind you have the more wind noise will increase. For customers that live in high-wind areas or regularly drive at high-speeds (120kmh+) we've developed a Stealth Air Dam (included with every set of Mounting Rails) that significantly reduces the noise caused by high-velocity air flows. Best of all, this wind noise performance improvement is accomplished utilising a product that mounts out-of-sight (ensuring it doesn't inhibit use of your rack, or obscure views out of your sunroof).
  
  Our roof racks deliver an experience with no creaking, no rattling, and very low wind noise. We accomplish these amazing feats through a series of technologically advanced aerodynamic methods, along with some proven old school tech (rubber isolators).

  
  

  LOW PROFILE

  Our roof racks are engineered to sit incredibly low at only 86mm above the roofline. We looked at mounting even closer to the vehicle, but during our real-world testing we found it was helpful to have a slight gap between the roof and the rack, so you can slip a hand underneath the rack to wash your roof.

  
  

  UNOBSTRUCTED VIEWS

  If your vehicle has a Sunroof, our roof rack won’t block your view (position your Planks wherever you want) so you can see and experience the beauty of the nature around you.

  
  

  STYLE

  We poured over every design detail to ensure the J200 Roof Rack would look great from every angle. Function was our primary aim, but we also studied every line and every proportion, paying close attention to how they integrate with the lines of the J200.

  
  

  FIT & FINISH

  We utilise advanced manufacturing techniques to achieve a degree of fit-and-finish you have to see in-person to truly appreciate.

  
  

  SMOOTH TOP SURFACE

  The top of our platform is completely smooth. No bolt heads sticking up, tie-down plates that sit completely flush and fasteners that are hidden from view.

  
  

  EASILY MOUNT ACCESSORIES

  We make it extremely easy to mount your accessories and bring your gear with you. We provide (2) full-length channels in each plank, enabling you to use T-Nuts that slide the entire length of the Planks. Even better, is our industry leading Tie-Down Plates and Anchor Points. They provide numerous mounting options and easily slide and clamp between the Planks.

  
  

  TIE-DOWN PLATES

  One of the primary usability goals for our roof racks, was that you could easily bolt/fasten/tie-down to the rack at almost any location. Our custom engineered Tie-Down Plates deliver on that goal. They clamp securely between the Planks in a way that allows them to easily move and fasten anywhere along the entire length of the Planks. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to fasten/bolt just about any accessory you can find. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your platform.

  
  

  NEARLY UNLIMITED ACCESSORY MOUNTING LOCATIONS

  We provide heaps of mounting locations so you can easily mount accessories anywhere. To achieve that goal, we've engineered Planks you can move wherever you need them. Then we've provided two full-length channels in each Plank for captive T-Nuts, allowing you to bolt/fasten to the Plank at any point along the entire length of the Plank. Finally, for maximum flexibility we've delivered Tie-Down Plates that can easily move and fasten anywhere along the entire length of the Planks.

  
  

  COMPATIBLE WITH MOST ACCESSORIES

  If the accessory uses M6, M8 or M10 bolts for mounting, it will probably work with our roof rack system. If not, one of our upcoming adapter kits should take care of business.

  
  

  INNOVATIVE SUITE OF ACCESSORIES

  Chief Products engineering team has already started work on several innovative accessories to further expand the functionality of our roof rack system. Taking advantage of our ground-up approach and modular design is allowing us to develop roof rack accessories that no one has ever seen before.

  
  

  INDUSTRY LEADING CORROSION PROTECTION

  We utilise aircraft-grade aluminium alloys (highly corrosion resistant) for all of the major components of our roof rack system (with a layer of UV stable highly durable powder coat to provide additional protection). For all of our steel parts we utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts, then we add a layer of UV stable powder coat on top for additional protection. All of the included fasteners are protected as well - black zinc plating, zinc flake coatings, black oxide coatings or sometimes we just choose to use stainless steel fasteners. Our aim is to keep your roof rack looking great for many years to come.

  
  

  EASY TO INSTALL

  Easy bolt-on installation with no drilling. In addition, our bracketry is fully adjustable so it adapts to your roof.

  
  

  TOP QUALITY FINISHING TOUCHES

  We include all the details that matter. High tensile bolts for maximum strength. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening (critical to combat loosening from off-roading vibrations). Anti-Seize for bolted joints that are resistant to seizing (important for a product that sits on your roof fully exposed to the elements). A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
  
  We even include a few details you might not appreciate right away. For instance, if you’re installing lights, we provide channels in our mounting rails to run your wiring, (we even provide small holes for your zip ties, so you can hold your wiring up out of sight).
• No drilling or cutting required. Bolts to the roof using the existing roof nutserts provided by Toyota.
  Fitment confirmed on the following vehicles:

  2008 Toyota LandCruiser 200

  2009 Toyota LandCruiser 200

  2010 Toyota LandCruiser 200

  2010 Toyota LandCruiser 200

  2011 Toyota LandCruiser 200

  2012 Toyota LandCruiser 200

  2013 Toyota LandCruiser 200

  2014 Toyota LandCruiser 200

  2015 Toyota LandCruiser 200

  2016 Toyota LandCruiser 200

  2017 Toyota LandCruiser 200

  2018 Toyota LandCruiser 200

  2019 Toyota LandCruiser 200

  2020 Toyota LandCruiser 200

  2021 Toyota LandCruiser 200
  Compatible with the following products:

  This list is based on customer reports, Chief Products has not confirmed fitment of these products. This list will be updated regularly as customers report their experiences.
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Can I Install This Product Myself?

  Forged In Australia?

  What Warranty Do You Provide?

  Will My Roof Rack Develop Creaks and Rattles?

  WIND NOISE --- Understanding & Addressing Common Causes

  ROOF RACK --- Load Ratings Explained

Chief Products J200 ROOF RACK (Mounting Rails) act as the framework for our Modular Roof Rack System. Our unique modular approach, enables customers to build the roof rack they want, and easily reconfigure it whenever their needs change. Customers can have one configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). Customers get one roof rack, that can easily adapt to their needs.

Engineering our Mounting Rails as a key roof rack component, provides another important advantage; industry-leading load ratings (150kg dynamic & 460kg static). Our unique engineering approach, utilises a boxed design that resists deformation at any singular point, which helps transfer forces to the strongest points on the vehicle roof. When our Mounting Rails are combined with our Planks and Half-Planks, we're able to deliver a Modular Roof Rack System that provides customers with an unrivalled combination of modularity and strength.

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products N280 Roof Rack provides the pinnacle of performance for roof rack systems on the N280 (Toyota 4Runner, 2010-2024). It delivers industry-leading load ratings (150kg dynamic & 460kg static) and vehicle specific styling in a light-weight, low-profile design. Our Modular Roof Rack System provides an unrivalled amount of configurability. Customers can build the roof rack they want, and easily reconfigure it whenever their needs change. One configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). One roof rack; that can easily adapt to your needs.

  We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to keep the overall installed weight low and accomplish a degree of fit-and-finish you have to see in person to truly appreciate. The smooth top surface, low profile design and hidden fasteners have enabled us to deliver an extremely aerodynamic roof rack. Amazingly, even after thousands of kilometres of off-road driving, you won't hear any creaking or rattling. Best of all, we made it extremely easy to mount accessories - whether you're using t-nuts that slide the entire length of the Planks; or our industry-leading Tie-Down Plates that easily slide and clamp between the Planks. If you're looking for a top-quality place to carry extra gear on your next adventure, there's no doubt we've got you covered.

  FEATURES

  MODULAR DESIGN (Mix-And-Match Components)

  GROUNDBREAKING CONFIGURABILITY (Easily Move & Change Components)

  HIGH-STRENGTH (Industry-Leading Load Ratings)

  TOP-QUALITY MATERIALS (Aircraft-Grade Aluminium Alloys + High-Strength Steel)

  INDUSTRY-LEADING DURABILITY (High-Strength + Corrosion Protection + UV Stable Coatings)

  INDUSTRY-LEADING CORROSION PROTECTION (Special Coatings, Materials & Hardware)

  EASILY MOUNT ACCESSORIES (Adjustable Planks, T-Nuts & Tie-Down Plates)

  PREMIUM ACCESSORIES (Top-Quality, Innovative & 3rd Party Compatibility)

  VEHICLE SPECIFIC STYLING (Mounting Rails & Aero)

  STEALTH (Low Wind Noise + No Creaking/Rattling + Unobstructed Sunroof + Stealth Air Dam)

  TOP QUALITY FASTENERS (Blackened Stainless or High-Tensile + Wedge-Lock Washers)

  FIT & FINISH (Precision Manufacturing + Unrivalled QC Processes)

  EASY INSTALLATION (Difficulty = 2/10)
  SPECIFICATIONS

  100kg	DYNAMIC LOAD RATING (with 2x Half-Planks)
  300kg	STATIC LOAD RATING (with 2x Half-Planks)
  150kg	DYNAMIC LOAD RATING (with 2+ Planks)
  460kg	STATIC LOAD RATING (with 2+ Planks)
  86mm	OVERALL HEIGHT (above roof line)
  25mm	PLANK THICKNESS
  28.34mm	PLATFORM THICKNESS (fully assembled)
  2160mm	FULL PLATFORM LENGTH (fully assembled)
  1246mm	FULL PLATFORM WIDTH (fully assembled)
  11.4kg	INSTALLED WEIGHT --> Bare Bones
  11.4kg	INSTALLED WEIGHT --> Roof Top Tent [100-300kg]
  15.3kg	INSTALLED WEIGHT --> Roof Top Tent [150-460kg]
  19.2kg	INSTALLED WEIGHT --> Overland
  31.5kg	INSTALLED WEIGHT --> Safari
  39.7kg	INSTALLED WEIGHT --> Apex
  8.1kg	INSTALLED WEIGHT --> ((Build Your Own))

  INCLUDES

  
  

  BARE BONES
  

  1	N280 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (4x Half-Plank End-Caps)
  1	Installation Instructions

  
  

  ROOF TOP TENT [100-300kg]

  1	N280 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (4x Half-Plank End-Caps)
  1	Installation Instructions

  
  

  ROOF TOP TENT [150-460kg]

  1	N280 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Planks) [1146mm]
  1	ROOF RACK (4x Plank End-Caps)
  1	ROOF RACK (Roof Top Tent KIT)
  1	Installation Instructions

  
  

  OVERLAND

  1	N280 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Planks) [1146mm]
  1	ROOF RACK (4x Plank End-Caps)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (4x Half-Plank End-Caps)
  2	ROOF RACK (2x Tie-Down Plates)
  1	Installation Instructions

  
  

  SAFARI

  1	N280 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  4	ROOF RACK (2x Planks) [1146mm]
  4	ROOF RACK (4x Plank End-Caps)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (4x Half-Plank End-Caps)
  1	Installation Instructions

  
  

  APEX

  1	N280 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  4	ROOF RACK (2x Planks) [1146mm]
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (Platform Frame) [8.5 Plank]
  1	Installation Instructions

  
  

  ((BUILD YOUR OWN))

  1	N280 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	Installation Instructions

  EDITIONS

  
  

  BARE BONES
  

  We start with our Mounting Rails, then we add (2) Half-Planks and (4) Half-Plank End Caps. Super simple. Super strong (industry-leading load ratings for such a simple setup - 100kg dynamic & 300kg static). No non-sense. Want to upgrade to a Safari, Roof Top Tent, Overland or Apex edition? No Problem. Want to run with a simple setup that looks awesome, and works as advertised. This is it!

  
  

  ROOF TOP TENT [100-300kg]

  We've developed (2) editions of our N280 ROOF RACK for roof top tents. Our 100-300kg edition is the simplest and lightest version. Designed for customers that want a simple and easy setup for their roof top tent, and industry-leading load ratings (100kg dynamic & 300kg static). We start with our Mounting Rails, then we add (2) Half-Planks and (4) Half-Plank End-Caps. By using Half-Planks, we're able to keep the installed weight low, and make RTT installation super simple (most RTTs can easily clamp around our Half-Planks). Best of all, it's extremely easy to modify, upgrade or configure (just like every edition).

  
  

  ROOF TOP TENT [150-460kg]

  We've developed (2) editions of our N280 ROOF RACK for roof top tents. Our 150-460kg edition is the strongest version. Designed for customers that want the strongest setup for their roof top tent. We start with our Mounting Rails, then we add (2) Planks and (4) Plank End-Caps. Then we add our Roof Top Tent KIT, to make your RTT installation super easy. By using our standard Planks, we're able to provide industry-leading load ratings (150kg dynamic & 460kg static) in a package that looks great and is super easy to install. Best of all, it's extremely easy to modify, upgrade or configure (just like every edition).

  
  

  OVERLAND

  Our Overland edition is designed to provide maximum functionality when Overlanding. We start with our Mounting Rails, then add (2) Planks, (4) Plank End-Caps, (2) Half-Planks, (4) Half-Plank End-Caps, and finish with (4) Tie-Down Plates. The modular design, allows you to easily configure your roof rack components (Planks, Half-Planks, etc.) to suit the needs of your current adventure. The Tie-Down Plates are designed to be multi-functional. They can accommodate numerous accessories and tie-down strap configurations. This edition delivers industry leading load ratings (150kg dynamic & 460kg static) and a nearly unlimited amount of mounting locations for accessories.

  
  

  SAFARI

  Our Safari edition is all about delivering maximum functionality. We start with our Mounting Rails, then add (8) Planks, (16) End-Caps, (2) Half-Planks, and (4) Half-Plank End-Caps. The modular design, allows you to easily configure your roof rack components (Planks, Half-Planks, etc.) to suit the needs of your current adventure. This edition delivers industry-leading load ratings (150kg dynamic & 460kg static) and a nearly unlimited amount of mounting locations for accessories.

  
  

  APEX

  The pinnacle of roof rack performance for the N280. We start with our Mounting Rails, then add (8) Planks, (2) Half-Planks, and finish with our Platform Frame (smooth outside border that looks great, adds strength, and delivers the best aerodynamics possible). This edition delivers industry leading-load ratings (150kg dynamic & 460kg static) along with a nearly unlimited amount of mounting locations for accessories. Best of all, the Apex edition delivers industry-leading features with style (vehicle specific styling, smooth border, smooth top surface, amazing fit-n-finish, and fully hidden fasteners).

  
  

  ((BUILD YOUR OWN))

  Our Modular Roof Rack System allows customers to mix-and-match components to create the exact roof rack system they want. This edition starts with our Mounting Rails, and leaves the rest to you. You can add/change components to any of our roof rack editions, but if you want to build your roof rack from the ground up, this is the place to start.

  ---

  * WARNING *

  FOR MAXIMUM SAFETY DO NOT EXCEED MANUFACTURERS ROOF WEIGHT LIMITS. Our load ratings represent the maximum mechanical forces our roof rack system can withstand before failure. Our load ratings do not address vehicle safety during high-speed manoeuvres, or changes to vehicle dynamics caused by a higher centre of gravity.
  
  

  * CAUTION *

  For maximum safety, loads should be evenly distributed and properly secured to avoid shifting during transport. Before using your roof rack, it is important to familiarise yourself with the proper load securing techniques and be constantly safety oriented. Please note, all of our load ratings are based on an evenly distributed load.
• UNPRECEDENTED CONFIGURABILITY

  Choose how many Planks you want. Position your Planks wherever you want. Move your Planks easily, whenever you want. Choose if you want a frame around the outside. Choose how many Tie-Down Plates you want, and where you want them located. Configure your rack however you want. Numerous options. Numerous configurations.

  
  

  MODULAR DESIGN

  Our modular engineering approach allow us to deliver a roof rack system that can be easily adapted to any situation. It also means you can upgrade-downgrade your roof rack any time your needs require.

  
  

  HIGH-STRENGTH

  All versions deliver industry leading load ratings. These ratings were independently tested and the test results are certified to comply with Australian Standard (AS 1235-2000) as well as international standards (ISO / PAS 11154 : 2009:2006) and (DIN 75302/02: 1991). During independent testing, our roof rack system successfully withstood 330kg of upward force, 600kg of forward force (including a special 20° off-axis test). To achieve our certification we needed to have less than 10mm of movement in our structure at the tested loads, we had 0.17mm!
  
  One of the keys to our industry leading load ratings is our Mounting Rails. Not only do they transfer forces to the strongest points on the vehicle roof, they also utilise a boxed design that resists deformation at any singular point. This unique design element creates a 'mounting system’ that is much stronger than any of our competitors.

  
  

  LOW WEIGHT

  We utilise the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a roof rack system with an extremely high strength-to-weight ratio. This means our roof rack has an extremely low weight, while still being the very strongest on the market.

  
  

  STEALTH

  Chief Products roof racks are engineered to be extremely aerodynamic (smooth top surface, low profile design and hidden fasteners). These unique aerodynamic features make our roof racks extremely quiet for the majority of our customers. However, the more wind you have the more wind noise will increase. For customers that live in high-wind areas or regularly drive at high-speeds (120kmh+) we've developed a Stealth Air Dam (included with every set of Mounting Rails) that significantly reduces the noise caused by high-velocity air flows. Best of all, this wind noise performance improvement is accomplished utilising a product that mounts out-of-sight (ensuring it doesn't inhibit use of your rack, or obscure views out of your sunroof).
  
  Our roof racks deliver an experience with no creaking, no rattling, and very low wind noise. We accomplish these amazing feats through a series of technologically advanced aerodynamic methods, along with some proven old school tech (rubber isolators).

  
  

  LOW PROFILE

  Our roof racks are engineered to sit incredibly low at only 86mm above the roofline. We looked at mounting even closer to the vehicle, but during our real-world testing we found it was helpful to have a slight gap between the roof and the rack, so you can slip a hand underneath the rack to wash your roof.

  
  

  UNOBSTRUCTED VIEWS

  If your vehicle has a Sunroof, our roof rack won’t block your view (position your Planks wherever you want) so you can see and experience the beauty of the nature around you.

  
  

  STYLE

  We poured over every design detail to ensure the N280 Roof Rack would look great from every angle. Function was our primary aim, but we also studied every line and every proportion, paying close attention to how they integrate with the lines of the N280.

  
  

  FIT & FINISH

  We utilise advanced manufacturing techniques to achieve a degree of fit-and-finish you have to see in-person to truly appreciate.

  
  

  SMOOTH TOP SURFACE

  The top of our platform is completely smooth. No bolt heads sticking up, tie-down plates that sit completely flush and fasteners that are hidden from view.

  
  

  EASILY MOUNT ACCESSORIES

  We make it extremely easy to mount your accessories and bring your gear with you. We provide (2) full-length channels in each plank, enabling you to use T-Nuts that slide the entire length of the Planks. Even better, is our industry leading Tie-Down Plates and Anchor Points. They provide numerous mounting options and easily slide and clamp between the Planks.

  
  

  TIE-DOWN PLATES

  One of the primary usability goals for our roof racks, was that you could easily bolt/fasten/tie-down to the rack at almost any location. Our custom engineered Tie-Down Plates deliver on that goal. They clamp securely between the Planks in a way that allows them to easily move and fasten anywhere along the entire length of the Planks. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to fasten/bolt just about any accessory you can find. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your platform.

  
  

  NEARLY UNLIMITED ACCESSORY MOUNTING LOCATIONS

  We provide heaps of mounting locations so you can easily mount accessories anywhere. To achieve that goal, we've engineered Planks you can move wherever you need them. Then we've provided two full-length channels in each Plank for captive T-Nuts, allowing you to bolt/fasten to the Plank at any point along the entire length of the Plank. Finally, for maximum flexibility we've delivered Tie-Down Plates that can easily move and fasten anywhere along the entire length of the Planks.

  
  

  COMPATIBLE WITH MOST ACCESSORIES

  If the accessory uses M6, M8 or M10 bolts for mounting, it will probably work with our roof rack system. If not, one of our upcoming adapter kits should take care of business.

  
  

  INNOVATIVE SUITE OF ACCESSORIES

  Chief Products engineering team has already started work on several innovative accessories to further expand the functionality of our roof rack system. Taking advantage of our ground-up approach and modular design is allowing us to develop roof rack accessories that no one has ever seen before.

  
  

  INDUSTRY LEADING CORROSION PROTECTION

  We utilise aircraft-grade aluminium alloys (highly corrosion resistant) for all of the major components of our roof rack system (with a layer of UV stable highly durable powder coat to provide additional protection). For all of our steel parts we utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts, then we add a layer of UV stable powder coat on top for additional protection. All of the included fasteners are protected as well - black zinc plating, zinc flake coatings, black oxide coatings or sometimes we just choose to use stainless steel fasteners. Our aim is to keep your roof rack looking great for many years to come.

  
  

  EASY TO INSTALL

  Easy bolt-on installation with no drilling. In addition, our bracketry is fully adjustable so it adapts to your roof.

  
  

  TOP QUALITY FINISHING TOUCHES

  We include all the details that matter. High tensile bolts for maximum strength. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening (critical to combat loosening from off-roading vibrations). Anti-Seize for bolted joints that are resistant to seizing (important for a product that sits on your roof fully exposed to the elements). A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
  
  We even include a few details you might not appreciate right away. For instance, if you’re installing lights, we provide channels in our mounting rails to run your wiring, (we even provide small holes for your zip ties, so you can hold your wiring up out of sight).
• Bolts to the roof using (8) existing roof nutserts provided by Toyota. Requires drilling (2) holes in the roof gutter for installation of (2) stainless steel nutserts.
  Fitment confirmed on the following vehicles:

  2010 Toyota 4Runner

  2011 Toyota 4Runner

  2012 Toyota 4Runner

  2013 Toyota 4Runner

  2014 Toyota 4Runner

  2015 Toyota 4Runner

  2016 Toyota 4Runner

  2017 Toyota 4Runner

  2018 Toyota 4Runner

  2019 Toyota 4Runner

  2020 Toyota 4Runner

  2021 Toyota 4Runner

  2022 Toyota 4Runner

  2023 Toyota 4Runner

  2024 Toyota 4Runner
  Compatible with the following products:

  This list is based on customer reports, Chief Products has not confirmed fitment of these products. This list will be updated regularly as customers report their experiences.
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Can I Install This Product Myself?

  Forged In Australia?

  What Warranty Do You Provide?

  Will My Roof Rack Develop Creaks and Rattles?

  WIND NOISE --- Understanding & Addressing Common Causes

  ROOF RACK --- Load Ratings Explained

Chief Products N280 ROOF RACK (Mounting Rails) act as the framework for our Modular Roof Rack System. Our unique modular approach, enables customers to build the roof rack they want, and easily reconfigure it whenever their needs change. Customers can have one configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). Customers get one roof rack, that can easily adapt to their needs.

Engineering our Mounting Rails as a key roof rack component, provides another important advantage; industry-leading load ratings (150kg dynamic & 460kg static). Our unique engineering approach, utilises a boxed design that resists deformation at any singular point, which helps transfer forces to the strongest points on the vehicle roof. When our Mounting Rails are combined with our Planks and Half-Planks, we're able to deliver a Modular Roof Rack System that provides customers with an unrivalled combination of modularity and strength.

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products P375 Roof Rack provides the pinnacle of performance for roof rack systems on the P375 (Ford Ranger, 2011-2021). It delivers industry-leading load ratings (150kg dynamic & 460kg static) and vehicle specific styling in a light-weight, low-profile design. Our Modular Roof Rack System provides an unrivalled amount of configurability. Customers can build the roof rack they want, and easily reconfigure it whenever their needs change. One configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). One roof rack; that can easily adapt to your needs.

  We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to keep the overall installed weight low and accomplish a degree of fit-and-finish you have to see in person to truly appreciate. The smooth top surface, low profile design and hidden fasteners have enabled us to deliver an extremely aerodynamic roof rack. Amazingly, even after thousands of kilometres of off-road driving, you won't hear any creaking or rattling. Best of all, we made it extremely easy to mount accessories - whether you're using t-nuts that slide the entire length of the Planks; or our industry-leading Tie-Down Plates that easily slide and clamp between the Planks. If you're looking for a top-quality place to carry extra gear on your next adventure, there's no doubt we've got you covered.

  FEATURES

  MODULAR DESIGN (Mix-And-Match Components)

  GROUNDBREAKING CONFIGURABILITY (Easily Move & Change Components)

  HIGH-STRENGTH (Industry-Leading Load Ratings)

  TOP-QUALITY MATERIALS (Aircraft-Grade Aluminium Alloys + High-Strength Steel)

  INDUSTRY-LEADING DURABILITY (High-Strength + Corrosion Protection + UV Stable Coatings)

  INDUSTRY-LEADING CORROSION PROTECTION (Special Coatings, Materials & Hardware)

  EASILY MOUNT ACCESSORIES (Adjustable Planks, T-Nuts & Tie-Down Plates)

  PREMIUM ACCESSORIES (Top-Quality, Innovative & 3rd Party Compatibility)

  VEHICLE SPECIFIC STYLING (Mounting Rails & Aero)

  STEALTH (Low Wind Noise + No Creaking/Rattling + Unobstructed Sunroof + Stealth Air Dam)

  TOP QUALITY FASTENERS (Blackened Stainless or High-Tensile + Wedge-Lock Washers)

  FIT & FINISH (Precision Manufacturing + Unrivalled QC Processes)

  EASY INSTALLATION (Difficulty = 2/10)
  SPECIFICATIONS

  100kg	DYNAMIC LOAD RATING (with 2x Half-Planks)
  300kg	STATIC LOAD RATING (with 2x Half-Planks)
  150kg	DYNAMIC LOAD RATING (with 2+ Planks)
  460kg	STATIC LOAD RATING (with 2+ Planks)
  86mm	OVERALL HEIGHT (above roof line)
  25mm	PLANK THICKNESS
  28.34mm	PLATFORM THICKNESS (fully assembled)
  1490mm	FULL PLATFORM LENGTH (fully assembled)
  1246mm	FULL PLATFORM WIDTH (fully assembled)
  10.4kg	INSTALLED WEIGHT --> Bare Bones
  10.4kg	INSTALLED WEIGHT --> Roof Top Text [100-300kg]
  14.3kg	INSTALLED WEIGHT --> Roof Top Text [150-460kg]
  18.2kg	INSTALLED WEIGHT --> Overland
  24.6kg	INSTALLED WEIGHT --> Safari
  29.0kg	INSTALLED WEIGHT --> Apex
  7.1kg	INSTALLED WEIGHT --> ((Build Your Own))

  INCLUDES

  
  

  BARE BONES
  

  1	P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (4x Half-Plank End-Caps)
  1	Installation Instructions

  
  

  ROOF TOP TENT [100-300kg]

  1	P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (4x Half-Plank End-Caps)
  1	Installation Instructions

  
  

  ROOF TOP TENT [150-460kg]

  1	P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Planks) [1146mm]
  1	ROOF RACK (4x Plank End-Caps)
  1	ROOF RACK (Roof Top Tent KIT)
  1	Installation Instructions

  
  

  OVERLAND

  1	P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Planks) [1146mm]
  1	ROOF RACK (4x Plank End-Caps)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (4x Half-Plank End-Caps)
  2	ROOF RACK (2x Tie-Down Plates)
  1	Installation Instructions

  
  

  SAFARI

  1	P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  3	ROOF RACK (2x Planks) [1146mm]
  3	ROOF RACK (4x Plank End-Caps)
  1	Installation Instructions

  
  

  APEX

  1	P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  3	ROOF RACK (2x Planks) [1146mm]
  1	ROOF RACK (Platform Frame) [6 Plank]
  1	Installation Instructions

  
  

  ((BUILD YOUR OWN))

  1	P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	Installation Instructions

  EDITIONS

  
  

  BARE BONES
  

  We start with our Mounting Rails, then we add (2) Half-Planks and (4) Half-Plank End Caps. Super simple. Super strong (industry-leading load ratings for such a simple setup - 100kg dynamic & 300kg static). No non-sense. Want to upgrade to a Safari, Roof Top Tent, Overland or Apex edition? No Problem. Want to run with a simple setup that looks awesome, and works as advertised. This is it!

  
  

  ROOF TOP TENT [100-300kg]

  We've developed (2) editions of our P375 ROOF RACK for roof top tents. Our 100-300kg edition is the simplest and lightest version. Designed for customers that want a simple and easy setup for their roof top tent, and industry-leading load ratings (100kg dynamic & 300kg static). We start with our Mounting Rails, then we add (2) Half-Planks and (4) Half-Plank End-Caps. By using Half-Planks, we're able to keep the installed weight low, and make RTT installation super simple (most RTTs can easily clamp around our Half-Planks). Best of all, it's extremely easy to modify, upgrade or configure (just like every edition).

  
  

  ROOF TOP TENT [150-460kg]

  We've developed (2) editions of our P375 ROOF RACK for roof top tents. Our 150-460kg edition is the strongest version. Designed for customers that want the strongest setup for their roof top tent. We start with our Mounting Rails, then we add (2) Planks and (4) Plank End-Caps. Then we add our Roof Top Tent KIT, to make your RTT installation super easy. By using our standard Planks, we're able to provide industry-leading load ratings (150kg dynamic & 460kg static) in a package that looks great and is super easy to install. Best of all, it's extremely easy to modify, upgrade or configure (just like every edition).

  
  

  OVERLAND

  Our Overland edition is designed to provide maximum functionality when Overlanding. We start with our Mounting Rails, then add (2) Planks, (4) Plank End-Caps, (2) Half-Planks, (4) Half-Plank End-Caps, and finish with (4) Tie-Down Plates. The modular design, allows you to easily configure your roof rack components (Planks, Half-Planks, etc.) to suit the needs of your current adventure. The Tie-Down Plates are designed to be multi-functional. They can accommodate numerous accessories and tie-down strap configurations. This edition delivers industry leading load ratings (150kg dynamic & 460kg static) and a nearly unlimited amount of mounting locations for accessories.

  
  

  SAFARI

  Our Safari edition is all about delivering maximum functionality. We start with our Mounting Rails, then add (6) Planks and (12) End-Caps. The modular design, allows you to easily configure your roof rack components (Planks, Half-Planks, etc.) to suit the needs of your current adventure. This edition delivers industry-leading load ratings (150kg dynamic & 460kg static) and a nearly unlimited amount of mounting locations for accessories.

  
  

  APEX

  The pinnacle of roof rack performance for the P375. We start with our Mounting Rails, then add (6) Planks and our Platform Frame (smooth outside border that looks great, adds strength, and delivers the best aerodynamics possible). This edition delivers industry leading-load ratings (150kg dynamic & 460kg static) along with a nearly unlimited amount of mounting locations for accessories. Best of all, the Apex edition delivers industry-leading features with style (vehicle specific styling, smooth border, smooth top surface, amazing fit-n-finish, and fully hidden fasteners).

  
  

  ((BUILD YOUR OWN))

  Our Modular Roof Rack System allows customers to mix-and-match components to create the exact roof rack system they want. This edition starts with our Mounting Rails, and leaves the rest to you. You can add/change components to any of our roof rack editions, but if you want to build your roof rack from the ground up, this is the place to start.

  ---

  * WARNING *

  FOR MAXIMUM SAFETY DO NOT EXCEED MANUFACTURERS ROOF WEIGHT LIMITS. Our load ratings represent the maximum mechanical forces our roof rack system can withstand before failure. Our load ratings do not address vehicle safety during high-speed manoeuvres, or changes to vehicle dynamics caused by a higher centre of gravity.
  
  

  * CAUTION *

  For maximum safety, loads should be evenly distributed and properly secured to avoid shifting during transport. Before using your roof rack, it is important to familiarise yourself with the proper load securing techniques and be constantly safety oriented. Please note, all of our load ratings are based on an evenly distributed load.
• UNPRECEDENTED CONFIGURABILITY

  Choose how many Planks you want. Position your Planks wherever you want. Move your Planks easily, whenever you want. Choose if you want a frame around the outside. Choose how many Tie-Down Plates you want, and where you want them located. Configure your rack however you want. Numerous options. Numerous configurations.

  
  

  MODULAR DESIGN

  Our modular engineering approach allow us to deliver a roof rack system that can be easily adapted to any situation. It also means you can upgrade-downgrade your roof rack any time your needs require.

  
  

  HIGH-STRENGTH

  All versions deliver industry leading load ratings. These ratings were independently tested and the test results are certified to comply with Australian Standard (AS 1235-2000) as well as international standards (ISO / PAS 11154 : 2009:2006) and (DIN 75302/02: 1991). During independent testing, our roof rack system successfully withstood 330kg of upward force, 600kg of forward force (including a special 20° off-axis test). To achieve our certification we needed to have less than 10mm of movement in our structure at the tested loads, we had 0.17mm!
  
  One of the keys to our industry leading load ratings is our Mounting Rails. Not only do they transfer forces to the strongest points on the vehicle roof, they also utilise a boxed design that resists deformation at any singular point. This unique design element creates a 'mounting system’ that is much stronger than any of our competitors.

  
  

  LOW WEIGHT

  We utilise the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a roof rack system with an extremely high strength-to-weight ratio. This means our roof rack has an extremely low weight, while still being the very strongest on the market.

  
  

  STEALTH

  Chief Products roof racks are engineered to be extremely aerodynamic (smooth top surface, low profile design and hidden fasteners). These unique aerodynamic features make our roof racks extremely quiet for the majority of our customers. However, the more wind you have the more wind noise will increase. For customers that live in high-wind areas or regularly drive at high-speeds (120kmh+) we've developed a Stealth Air Dam (included with every set of Mounting Rails) that significantly reduces the noise caused by high-velocity air flows. Best of all, this wind noise performance improvement is accomplished utilising a product that mounts out-of-sight (ensuring it doesn't inhibit use of your rack, or obscure views out of your sunroof).
  
  Our roof racks deliver an experience with no creaking, no rattling, and very low wind noise. We accomplish these amazing feats through a series of technologically advanced aerodynamic methods, along with some proven old school tech (rubber isolators).

  
  

  LOW PROFILE

  Our roof racks are engineered to sit incredibly low at only 86mm above the roofline. We looked at mounting even closer to the vehicle, but during our real-world testing we found it was helpful to have a slight gap between the roof and the rack, so you can slip a hand underneath the rack to wash your roof.

  
  

  UNOBSTRUCTED VIEWS

  If your vehicle has a Sunroof, our roof rack won’t block your view (position your Planks wherever you want) so you can see and experience the beauty of the nature around you.

  
  

  STYLE

  We poured over every design detail to ensure the P375 Roof Rack would look great from every angle. Function was our primary aim, but we also studied every line and every proportion, paying close attention to how they integrate with the lines of the P375.

  
  

  FIT & FINISH

  We utilise advanced manufacturing techniques to achieve a degree of fit-and-finish you have to see in-person to truly appreciate.

  
  

  SMOOTH TOP SURFACE

  The top of our platform is completely smooth. No bolt heads sticking up, tie-down plates that sit completely flush and fasteners that are hidden from view.

  
  

  EASILY MOUNT ACCESSORIES

  We make it extremely easy to mount your accessories and bring your gear with you. We provide (2) full-length channels in each plank, enabling you to use T-Nuts that slide the entire length of the Planks. Even better, is our industry leading Tie-Down Plates and Anchor Points. They provide numerous mounting options and easily slide and clamp between the Planks.

  
  

  TIE-DOWN PLATES

  One of the primary usability goals for our roof racks, was that you could easily bolt/fasten/tie-down to the rack at almost any location. Our custom engineered Tie-Down Plates deliver on that goal. They clamp securely between the Planks in a way that allows them to easily move and fasten anywhere along the entire length of the Planks. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to fasten/bolt just about any accessory you can find. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your platform.

  
  

  NEARLY UNLIMITED ACCESSORY MOUNTING LOCATIONS

  We provide heaps of mounting locations so you can easily mount accessories anywhere. To achieve that goal, we've engineered Planks you can move wherever you need them. Then we've provided two full-length channels in each Plank for captive T-Nuts, allowing you to bolt/fasten to the Plank at any point along the entire length of the Plank. Finally, for maximum flexibility we've delivered Tie-Down Plates that can easily move and fasten anywhere along the entire length of the Planks.

  
  

  COMPATIBLE WITH MOST ACCESSORIES

  If the accessory uses M6, M8 or M10 bolts for mounting, it will probably work with our roof rack system. If not, one of our upcoming adapter kits should take care of business.

  
  

  INNOVATIVE SUITE OF ACCESSORIES

  Chief Products engineering team has already started work on several innovative accessories to further expand the functionality of our roof rack system. Taking advantage of our ground-up approach and modular design is allowing us to develop roof rack accessories that no one has ever seen before.

  
  

  INDUSTRY LEADING CORROSION PROTECTION

  We utilise aircraft-grade aluminium alloys (highly corrosion resistant) for all of the major components of our roof rack system (with a layer of UV stable highly durable powder coat to provide additional protection). For all of our steel parts we utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts, then we add a layer of UV stable powder coat on top for additional protection. All of the included fasteners are protected as well - black zinc plating, zinc flake coatings, black oxide coatings or sometimes we just choose to use stainless steel fasteners. Our aim is to keep your roof rack looking great for many years to come.

  
  

  EASY TO INSTALL

  Easy bolt-on installation with no drilling. In addition, our bracketry is fully adjustable so it adapts to your roof.

  
  

  TOP QUALITY FINISHING TOUCHES

  We include all the details that matter. High tensile bolts for maximum strength. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening (critical to combat loosening from off-roading vibrations). Anti-Seize for bolted joints that are resistant to seizing (important for a product that sits on your roof fully exposed to the elements). A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
  
  We even include a few details you might not appreciate right away. For instance, if you’re installing lights, we provide channels in our mounting rails to run your wiring, (we even provide small holes for your zip ties, so you can hold your wiring up out of sight).
• Requires drilling (8) holes in the roof gutter to install stainless steel nutserts.
  Fitment confirmed on the following vehicles:

  2011 Ford Ranger

  2012 Ford Ranger

  2013 Ford Ranger

  2014 Ford Ranger

  2015 Ford Ranger

  2016 Ford Ranger

  2017 Ford Ranger

  2018 Ford Ranger

  2019 Ford Ranger

  2020 Ford Ranger

  2021 Ford Ranger
  Compatible with the following products:

  This list is based on customer reports, Chief Products has not confirmed fitment of these products. This list will be updated regularly as customers report their experiences.
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Can I Install This Product Myself?

  Forged In Australia?

  What Warranty Do You Provide?

  Will My Roof Rack Develop Creaks and Rattles?

  WIND NOISE --- Understanding & Addressing Common Causes

  ROOF RACK --- Load Ratings Explained

Chief Products P375-P703-AM2G-UP-UR ROOF RACK (Aero) delivers enhanced styling and aerodynamic performance. Engineered to reduce wind noise by restricting the amount of high-velocity air flowing through the confined space underneath your roof rack.

Ideal for customers wanting optimum aerodynamic performance in high-wind conditions, cross-wind conditions, or regular high-speed driving. P375-P703-AM2G-UP-UR ROOF RACK (Aero) can be used as a replacement for the ROOF RACK (Stealth Air Dam) or in combination.

* ROOF RACK (Stealth Air Dam) provides excellent performance for most customers and is included with every set of Chief Products Mounting Rails.

Chief Products P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails) act as the framework for our Modular Roof Rack System. Our unique modular approach, enables customers to build the roof rack they want, and easily reconfigure it whenever their needs change. Customers can have one configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). Customers get one roof rack, that can easily adapt to their needs.

Engineering our Mounting Rails as a key roof rack component, provides another important advantage; industry-leading load ratings (150kg dynamic & 460kg static). Our unique engineering approach, utilises a boxed design that resists deformation at any singular point, which helps transfer forces to the strongest points on the vehicle roof. When our Mounting Rails are combined with our Planks and Half-Planks, we're able to deliver a Modular Roof Rack System that provides customers with an unrivalled combination of modularity and strength.

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products P703 Roof Rack provides the pinnacle of performance for roof rack systems on the P703 (Ford Ranger, 2022-Current). It delivers industry-leading load ratings (150kg dynamic & 460kg static) and vehicle specific styling in a light-weight, low-profile design. Our Modular Roof Rack System provides an unrivalled amount of configurability. Customers can build the roof rack they want, and easily reconfigure it whenever their needs change. One configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). One roof rack; that can easily adapt to your needs.

  We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to keep the overall installed weight low and accomplish a degree of fit-and-finish you have to see in person to truly appreciate. The smooth top surface, low profile design and hidden fasteners have enabled us to deliver an extremely aerodynamic roof rack. Amazingly, even after thousands of kilometres of off-road driving, you won't hear any creaking or rattling. Best of all, we made it extremely easy to mount accessories - whether you're using t-nuts that slide the entire length of the Planks; or our industry-leading Tie-Down Plates that easily slide and clamp between the Planks. If you're looking for a top-quality place to carry extra gear on your next adventure, there's no doubt we've got you covered.

  FEATURES

  MODULAR DESIGN (Mix-And-Match Components)

  GROUNDBREAKING CONFIGURABILITY (Easily Move & Change Components)

  HIGH-STRENGTH (Industry-Leading Load Ratings)

  TOP-QUALITY MATERIALS (Aircraft-Grade Aluminium Alloys + High-Strength Steel)

  INDUSTRY-LEADING DURABILITY (High-Strength + Corrosion Protection + UV Stable Coatings)

  INDUSTRY-LEADING CORROSION PROTECTION (Special Coatings, Materials & Hardware)

  EASILY MOUNT ACCESSORIES (Adjustable Planks, T-Nuts & Tie-Down Plates)

  PREMIUM ACCESSORIES (Top-Quality, Innovative & 3rd Party Compatibility)

  VEHICLE SPECIFIC STYLING (Mounting Rails & Aero)

  STEALTH (Low Wind Noise + No Creaking/Rattling + Unobstructed Sunroof + Stealth Air Dam)

  TOP QUALITY FASTENERS (Blackened Stainless or High-Tensile + Wedge-Lock Washers)

  FIT & FINISH (Precision Manufacturing + Unrivalled QC Processes)

  EASY INSTALLATION (Difficulty = 2/10)
  SPECIFICATIONS

  100kg	DYNAMIC LOAD RATING (with 2x Half-Planks)
  300kg	STATIC LOAD RATING (with 2x Half-Planks)
  150kg	DYNAMIC LOAD RATING (with 2+ Planks)
  460kg	STATIC LOAD RATING (with 2+ Planks)
  86mm	OVERALL HEIGHT (above roof line)
  25mm	PLANK THICKNESS
  28.34mm	PLATFORM THICKNESS (fully assembled)
  1490mm	FULL PLATFORM LENGTH (fully assembled)
  1246mm	FULL PLATFORM WIDTH (fully assembled)
  10.4kg	INSTALLED WEIGHT --> Bare Bones
  10.4kg	INSTALLED WEIGHT --> Roof Top Tent [100-300kg]
  14.3kg	INSTALLED WEIGHT --> Roof Top Tent [150-460kg]
  18.2kg	INSTALLED WEIGHT --> Overland
  24.6kg	INSTALLED WEIGHT --> Safari
  29.0kg	INSTALLED WEIGHT --> Apex
  7.1kg	INSTALLED WEIGHT --> ((Build Your Own))

  INCLUDES

  
  

  BARE BONES
  

  1	P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (4x Half-Plank End-Caps)
  1	Installation Instructions

  
  

  ROOF TOP TENT [100-300kg]

  1	P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (4x Half-Plank End-Caps)
  1	Installation Instructions

  
  

  ROOF TOP TENT [150-460kg]

  1	P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Planks) [1146mm]
  1	ROOF RACK (4x Plank End-Caps)
  1	ROOF RACK (Roof Top Tent KIT)
  1	Installation Instructions

  
  

  OVERLAND

  1	P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Planks) [1146mm]
  1	ROOF RACK (4x Plank End-Caps)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (4x Half-Plank End-Caps)
  2	ROOF RACK (2x Tie-Down Plates)
  1	Installation Instructions

  
  

  SAFARI

  1	P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  3	ROOF RACK (2x Planks) [1146mm]
  3	ROOF RACK (4x Plank End-Caps)
  1	Installation Instructions

  
  

  APEX

  1	P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  3	ROOF RACK (2x Planks) [1146mm]
  1	ROOF RACK (Platform Frame) [6 Plank]
  1	Installation Instructions

  
  

  ((BUILD YOUR OWN))

  1	P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	Installation Instructions

  EDITIONS

  
  

  BARE BONES
  

  We start with our Mounting Rails, then we add (2) Half-Planks and (4) Half-Plank End Caps. Super simple. Super strong (industry-leading load ratings for such a simple setup - 100kg dynamic & 300kg static). No non-sense. Want to upgrade to a Safari, Roof Top Tent, Overland or Apex edition? No Problem. Want to run with a simple setup that looks awesome, and works as advertised. This is it!

  
  

  ROOF TOP TENT [100-300kg]

  We've developed (2) editions of our P703 ROOF RACK for roof top tents. Our 100-300kg edition is the simplest and lightest version. Designed for customers that want a simple and easy setup for their roof top tent, and industry-leading load ratings (100kg dynamic & 300kg static). We start with our Mounting Rails, then we add (2) Half-Planks and (4) Half-Plank End-Caps. By using Half-Planks, we're able to keep the installed weight low, and make RTT installation super simple (most RTTs can easily clamp around our Half-Planks). Best of all, it's extremely easy to modify, upgrade or configure (just like every edition).

  
  

  ROOF TOP TENT [150-460kg]

  We've developed (2) editions of our P703 ROOF RACK for roof top tents. Our 150-460kg edition is the strongest version. Designed for customers that want the strongest setup for their roof top tent. We start with our Mounting Rails, then we add (2) Planks and (4) Plank End-Caps. Then we add our Roof Top Tent KIT, to make your RTT installation super easy. By using our standard Planks, we're able to provide industry-leading load ratings (150kg dynamic & 460kg static) in a package that looks great and is super easy to install. Best of all, it's extremely easy to modify, upgrade or configure (just like every edition).

  
  

  OVERLAND

  Our Overland edition is designed to provide maximum functionality when Overlanding. We start with our Mounting Rails, then add (2) Planks, (4) Plank End-Caps, (2) Half-Planks, (4) Half-Plank End-Caps, and finish with (4) Tie-Down Plates. The modular design, allows you to easily configure your roof rack components (Planks, Half-Planks, etc.) to suit the needs of your current adventure. The Tie-Down Plates are designed to be multi-functional. They can accommodate numerous accessories and tie-down strap configurations. This edition delivers industry leading load ratings (150kg dynamic & 460kg static) and a nearly unlimited amount of mounting locations for accessories.

  
  

  SAFARI

  Our Safari edition is all about delivering maximum functionality. We start with our Mounting Rails, then add (6) Planks and (12) End-Caps. The modular design, allows you to easily configure your roof rack components (Planks, Half-Planks, etc.) to suit the needs of your current adventure. This edition delivers industry-leading load ratings (150kg dynamic & 460kg static) and a nearly unlimited amount of mounting locations for accessories.

  
  

  APEX

  The pinnacle of roof rack performance for the P703. We start with our Mounting Rails, then add (6) Planks and our Platform Frame (smooth outside border that looks great, adds strength, and delivers the best aerodynamics possible). This edition delivers industry leading-load ratings (150kg dynamic & 460kg static) along with a nearly unlimited amount of mounting locations for accessories. Best of all, the Apex edition delivers industry-leading features with style (vehicle specific styling, smooth border, smooth top surface, amazing fit-n-finish, and fully hidden fasteners).

  
  

  ((BUILD YOUR OWN))

  Our Modular Roof Rack System allows customers to mix-and-match components to create the exact roof rack system they want. This edition starts with our Mounting Rails, and leaves the rest to you. You can add/change components to any of our roof rack editions, but if you want to build your roof rack from the ground up, this is the place to start.

  ---

  * WARNING *

  FOR MAXIMUM SAFETY DO NOT EXCEED MANUFACTURERS ROOF WEIGHT LIMITS. Our load ratings represent the maximum mechanical forces our roof rack system can withstand before failure. Our load ratings do not address vehicle safety during high-speed manoeuvres, or changes to vehicle dynamics caused by a higher centre of gravity.
  
  

  * CAUTION *

  For maximum safety, loads should be evenly distributed and properly secured to avoid shifting during transport. Before using your roof rack, it is important to familiarise yourself with the proper load securing techniques and be constantly safety oriented. Please note, all of our load ratings are based on an evenly distributed load.
• UNPRECEDENTED CONFIGURABILITY

  Choose how many Planks you want. Position your Planks wherever you want. Move your Planks easily, whenever you want. Choose if you want a frame around the outside. Choose how many Tie-Down Plates you want, and where you want them located. Configure your rack however you want. Numerous options. Numerous configurations.

  
  

  MODULAR DESIGN

  Our modular engineering approach allow us to deliver a roof rack system that can be easily adapted to any situation. It also means you can upgrade-downgrade your roof rack any time your needs require.

  
  

  HIGH-STRENGTH

  All versions deliver industry leading load ratings. These ratings were independently tested and the test results are certified to comply with Australian Standard (AS 1235-2000) as well as international standards (ISO / PAS 11154 : 2009:2006) and (DIN 75302/02: 1991). During independent testing, our roof rack system successfully withstood 330kg of upward force, 600kg of forward force (including a special 20° off-axis test). To achieve our certification we needed to have less than 10mm of movement in our structure at the tested loads, we had 0.17mm!
  
  One of the keys to our industry leading load ratings is our Mounting Rails. Not only do they transfer forces to the strongest points on the vehicle roof, they also utilise a boxed design that resists deformation at any singular point. This unique design element creates a 'mounting system’ that is much stronger than any of our competitors.

  
  

  LOW WEIGHT

  We utilise the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a roof rack system with an extremely high strength-to-weight ratio. This means our roof rack has an extremely low weight, while still being the very strongest on the market.

  
  

  STEALTH

  Chief Products roof racks are engineered to be extremely aerodynamic (smooth top surface, low profile design and hidden fasteners). These unique aerodynamic features make our roof racks extremely quiet for the majority of our customers. However, the more wind you have the more wind noise will increase. For customers that live in high-wind areas or regularly drive at high-speeds (120kmh+) we've developed a Stealth Air Dam (included with every set of Mounting Rails) that significantly reduces the noise caused by high-velocity air flows. Best of all, this wind noise performance improvement is accomplished utilising a product that mounts out-of-sight (ensuring it doesn't inhibit use of your rack, or obscure views out of your sunroof).
  
  Our roof racks deliver an experience with no creaking, no rattling, and very low wind noise. We accomplish these amazing feats through a series of technologically advanced aerodynamic methods, along with some proven old school tech (rubber isolators).

  
  

  LOW PROFILE

  Our roof racks are engineered to sit incredibly low at only 86mm above the roofline. We looked at mounting even closer to the vehicle, but during our real-world testing we found it was helpful to have a slight gap between the roof and the rack, so you can slip a hand underneath the rack to wash your roof.

  
  

  UNOBSTRUCTED VIEWS

  If your vehicle has a Sunroof, our roof rack won’t block your view (position your Planks wherever you want) so you can see and experience the beauty of the nature around you.

  
  

  STYLE

  We poured over every design detail to ensure the P703 Roof Rack would look great from every angle. Function was our primary aim, but we also studied every line and every proportion, paying close attention to how they integrate with the lines of the P703.

  
  

  FIT & FINISH

  We utilise advanced manufacturing techniques to achieve a degree of fit-and-finish you have to see in-person to truly appreciate.

  
  

  SMOOTH TOP SURFACE

  The top of our platform is completely smooth. No bolt heads sticking up, tie-down plates that sit completely flush and fasteners that are hidden from view.

  
  

  EASILY MOUNT ACCESSORIES

  We make it extremely easy to mount your accessories and bring your gear with you. We provide (2) full-length channels in each plank, enabling you to use T-Nuts that slide the entire length of the Planks. Even better, is our industry leading Tie-Down Plates and Anchor Points. They provide numerous mounting options and easily slide and clamp between the Planks.

  
  

  TIE-DOWN PLATES

  One of the primary usability goals for our roof racks, was that you could easily bolt/fasten/tie-down to the rack at almost any location. Our custom engineered Tie-Down Plates deliver on that goal. They clamp securely between the Planks in a way that allows them to easily move and fasten anywhere along the entire length of the Planks. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to fasten/bolt just about any accessory you can find. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your platform.

  
  

  NEARLY UNLIMITED ACCESSORY MOUNTING LOCATIONS

  We provide heaps of mounting locations so you can easily mount accessories anywhere. To achieve that goal, we've engineered Planks you can move wherever you need them. Then we've provided two full-length channels in each Plank for captive T-Nuts, allowing you to bolt/fasten to the Plank at any point along the entire length of the Plank. Finally, for maximum flexibility we've delivered Tie-Down Plates that can easily move and fasten anywhere along the entire length of the Planks.

  
  

  COMPATIBLE WITH MOST ACCESSORIES

  If the accessory uses M6, M8 or M10 bolts for mounting, it will probably work with our roof rack system. If not, one of our upcoming adapter kits should take care of business.

  
  

  INNOVATIVE SUITE OF ACCESSORIES

  Chief Products engineering team has already started work on several innovative accessories to further expand the functionality of our roof rack system. Taking advantage of our ground-up approach and modular design is allowing us to develop roof rack accessories that no one has ever seen before.

  
  

  INDUSTRY LEADING CORROSION PROTECTION

  We utilise aircraft-grade aluminium alloys (highly corrosion resistant) for all of the major components of our roof rack system (with a layer of UV stable highly durable powder coat to provide additional protection). For all of our steel parts we utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts, then we add a layer of UV stable powder coat on top for additional protection. All of the included fasteners are protected as well - black zinc plating, zinc flake coatings, black oxide coatings or sometimes we just choose to use stainless steel fasteners. Our aim is to keep your roof rack looking great for many years to come.

  
  

  EASY TO INSTALL

  Easy bolt-on installation with no drilling. In addition, our bracketry is fully adjustable so it adapts to your roof.

  
  

  TOP QUALITY FINISHING TOUCHES

  We include all the details that matter. High tensile bolts for maximum strength. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening (critical to combat loosening from off-roading vibrations). Anti-Seize for bolted joints that are resistant to seizing (important for a product that sits on your roof fully exposed to the elements). A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
  
  We even include a few details you might not appreciate right away. For instance, if you’re installing lights, we provide channels in our mounting rails to run your wiring, (we even provide small holes for your zip ties, so you can hold your wiring up out of sight).
• Requires drilling (8) holes in the roof gutter to install stainless steel nutserts.
  Fitment confirmed on the following vehicles:

  2022 Ford Ranger

  2023 Ford Ranger

  2024 Ford Ranger
  Compatible with the following products:

  This list is based on customer reports, Chief Products has not confirmed fitment of these products. This list will be updated regularly as customers report their experiences.
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Can I Install This Product Myself?

  Forged In Australia?

  What Warranty Do You Provide?

  Will My Roof Rack Develop Creaks and Rattles?

  WIND NOISE --- Understanding & Addressing Common Causes

  ROOF RACK --- Load Ratings Explained

Chief Products ROOF RACK (Half-Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Half-Plank provides a channel for captive T-Nuts. This feature allows you to easily bolt accessories to the Half-Plank at any point along the entire length.

We provide (2) Half-Planks; each measuring 1146mm (45.12") long, 77mm (3.03") wide and an amazing 25mm (0.98") thin. We utilise a proprietary Aircraft-Grade Aluminium Alloy and an advanced Extrusion Manufacturing Process that allows us to deliver Half-Planks with an extremely high strength-to-weight ratio.

Chief Products ROOF RACK (Half-Plank End-Caps) provide a nice finish to the ends of our Half-Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Half-Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Half-Plank End-Caps; enough for (2) Half-Planks. They bolt on easily and feature (7) slots.

Chief Products ROOF RACK (Adjustable Load Rails) are engineered to be multi-functional; acting as a border, divider, grab handle or high-strength way to secure gear. Using our T-Nuts, they can be easily mounted anywhere on your roof rack. Sideways, crossways, or bridging across multiple Planks. We provide (3) different sizes, so you can combine multiple Load Rails to create the exact configuration you need. Want to change your configuration? Loosen the t-nuts, slide the Load Rails into a new position, and retighten. It's that simple!

We've utilised the latest manufacturing techniques and Aircraft-Grade Aluminium Alloys to deliver a product that is light, strong, highly-durable and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.

Chief Products ROOF RACK (Platform Frame) is designed to provide your roof rack with a smooth outside border that looks great, adds strength, and delivers improved aerodynamics. The corners of our Platform Frame are die-cast from a proprietary Aircraft-Grade Aluminium Alloy. The frame rails utilise the same Aircraft-Grade Aluminium Alloy combined with an advanced Extrusion Manufacturing Process. We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a product that is light, strong, highly durable and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.

Chief Products ROOF RACK (Platform Frame) is designed to provide your roof rack with a smooth outside border that looks great, adds strength, and delivers improved aerodynamics. The corners of our Platform Frame are die-cast from a proprietary Aircraft-Grade Aluminium Alloy. The frame rails utilise the same Aircraft-Grade Aluminium Alloy combined with an advanced Extrusion Manufacturing Process. We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a product that is light, strong, highly durable and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.

Chief Products ROOF RACK (Platform Frame) is designed to provide your roof rack with a smooth outside border that looks great, adds strength, and delivers improved aerodynamics. The corners of our Platform Frame are die-cast from a proprietary Aircraft-Grade Aluminium Alloy. The frame rails utilise the same Aircraft-Grade Aluminium Alloy combined with an advanced Extrusion Manufacturing Process. We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a product that is light, strong, highly durable and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.

Chief Products ROOF RACK (Platform Frame) is designed to provide your roof rack with a smooth outside border that looks great, adds strength, and delivers improved aerodynamics. The corners of our Platform Frame are die-cast from a proprietary Aircraft-Grade Aluminium Alloy. The frame rails utilise the same Aircraft-Grade Aluminium Alloy combined with an advanced Extrusion Manufacturing Process. We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a product that is light, strong, highly durable and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 LOWER FRONT GUARD (Upper Fascia) delivers improved styling for all 2013-2021 Jeep Grand Cherokees with a WK2 LOWER FRONT GUARD installed. The 3-piece design ensures easy installation and a low installed weight. Best of all, we're able to deliver this improved styling without negatively effecting vehicle approach angle or any of the vehicle safety systems.

  FEATURES

  LOW INSTALLED WEIGHT

  DURABLE POWDER COAT FINISH (Textured Black)

  E-COAT (Industry Leading Corrosion Protection)

  EASY INSTALLATION (Difficulty = 2/10)
  SPECIFICATIONS

  2.6kg	INSTALLED WEIGHT
  +4.2°	APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with Standard Guard)
  +2.2°	APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with ACC Guard)
  +10.6°	APPROACH ANGLE (Summit & SRT with Standard Guard)
  +8.6°	APPROACH ANGLE (Summit & SRT with ACC Guard)

  *  Approach Angle calculations represent improvement over stock (based on stock tyres, lower front fascia removed and air suspension in STD height). Raising the air suspension or installing larger tyres will increase the approach angle improvements.

  ---

  * REQUIRED *

  WK2 LOWER FRONT GUARD (Upper Fascia) cannot be installed without WK2 LOWER FRONT GUARD. The (2) products integrate seamlessly to provide robust protection for the front of your WK2.
• STYLE

  Our design team paid attention to every facet, so we could deliver a product that looks great from every angle and compliments the lines of your WK2 with a fully integrated appearance.

  MAXIMUM APPROACH ANGLE

  Since our design doesn't extend past the front of your WK2, the maximum approach angle is retained.

  COMPATIBLE with ALL VEHICLE SYSTEMS

  Full compatibility with all vehicle systems (Air Bags, Blind Spot Monitoring, ParkSense Front & Rear Park Assist System, Adaptive Cruise Control, Full-Speed Forward Collision Warning with Active Braking, LaneSense Lane Departure Warning with Lane Keep Assist & Parallel and Perpendicular Park Assist).

  COMPATIBLE with FRONT RECOVERY POINTS

  Compatible with Chief Products WK2 Recovery Points & WK2 Recovery Hooks (engineer rated to 4,500kg) as well as OEM Tow Hooks (approximate engineer rating of 2,500kg).

  MAXIMUM APPROACH ANGLE

  Since our design doesn't extend past the front of your WK2, the maximum approach angle is retained.

  VEHICLE INTEGRATED DESIGN

  Engineered from the ground up to integrate seamlessly with your WK2 (Jeep Grand Cherokee 2011-2020) and Chief Products WK2 Lower Front Guard. Providing compatibility with all vehicle safety systems, maximum approach angle, a design that doesn't impede critical air flow to the radiator core (critical for towing & off-road performance) and styling that closely matches the lines of your Jeep.

  LOW INSTALLED WEIGHT

  Only 2.6kg when fully installed.

  EASY TO INSTALL

  We provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can install this yourself.

  INDUSTRY LEADING CORROSION PROTECTION

  We utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. This industry-leading process (often only offered by OEMs) ensures full-coverage in hard to reach areas that are often missed by other coating processes. On top of the electrophoretic coating, we apply 80µm of an extremely durable and UV stable powder coat (advanced polyester thermosetting powder). This 2 layer approach ensures maximum corrosion protection for all steel parts.

  REAL WORLD TESTING

  There aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.

  TOP QUALITY FINISHING TOUCHES

  We include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
• Requires WK2 LOWER FRONT GUARD. Bolts to existing mounting points, no drilling or cutting required.
  Fitment confirmed on the following vehicles:

  2013 Jeep Grand Cherokee - All Models & Limited Editions

  2014 Jeep Grand Cherokee - All Models & Limited Editions

  2015 Jeep Grand Cherokee - All Models & Limited Editions

  2016 Jeep Grand Cherokee - All Models & Limited Editions

  2017 Jeep Grand Cherokee - All Models & Limited Editions

  2018 Jeep Grand Cherokee - All Models & Limited Editions

  2019 Jeep Grand Cherokee - All Models & Limited Editions

  2020 Jeep Grand Cherokee - All Models & Limited Editions

  2021 Jeep Grand Cherokee - All Models & Limited Editions

  *  Fits USA & Export models.

  **  Fitment on Summit & High Altitude (2013-2016) requires permanent removal of the lower front fascia.

  ***  Fitment on Summit & High Altitude (2017-2021) and SRT (all model years) requires permanent removal of the lower front fascia and cutting of the plastic bumper.
  Product does NOT fit on the following vehicles:

  2011 Jeep Grand Cherokee - All Models & Limited Editions

  2012 Jeep Grand Cherokee - All Models & Limited Editions

  *  Does not fit (and is not needed) on 2011 & 2012 Jeep Grand Cherokees (due to a different front bumper design).
  Fitment unconfirmed on the following vehicles:

  2018-2020 Jeep Grand Cherokee - Trackhawk
  Fitment confirmed with the following products:

  WK2 LOWER FRONT GUARD

  WK2 NUDGE BAR

  WK2 RECOVERY POINT

  WK2 RECOVERY HOOK
  Product does NOT fit with the following products:

  WK2 OFF-ROAD FRONT BUMPER

  WK2 HIDDEN WINCH MOUNT
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Can I Install This Product Myself?

  Forged In Australia?

  What Warranty Do You Provide?

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 Off-Road Front Bumper delivers world-class off-road protection for the front of your WK2 (Jeep Grand Cherokee, 2011-2020). Engineered to integrate fully with the styling and function of your WK2. The WK2 Off-Road Front Bumper's modular design allows you to build exactly what you need, while delivering industry-leading performance in several important categories; improved approach angle (for better off-road performance), high-volume airflow (critical for towing & off-road performance), industry leading corrosion protection (E-Coat, SS316 Fasteners & Aluminium Alloy Accessories), low installed weight (providing better fuel economy & improved suspension performance) and full compatibility with all safety systems (air bags, advanced parking sensors, adaptive cruise control, forward collision warning and lane departure warning). No matter what model WK2 you have, Chief Products WK2 Off-Road Front Bumper delivers exceptional off-road performance, and a degree of fit-and-finish you have to see in person to truly appreciate.

  We engineered the WK2 Off-Road Front Bumper from the ground up (and performed extensive real-world testing)to ensure we delivered a product you could count on when you need it most. Best of all, the modular design provides an unprecedented amount of configurability, allowing you to mix-and-match components to create the exact Off-Road Front Bumper you want. Want to install a winch? No problem. Want to install some off-road lights? No problem. Want a great place to mount your number plate? No problem (we give you 2 options). Want industry-leading recovery points? No problem. Want colour and accessory options, so the bar matches your style? No Problem. Just want to keep it super simple? No worries, we've got your back too. Build exactly what you want.

  FEATURES

  HIGH-STRENGTH

  VEHICLE INTEGRATED DESIGN (Compatible with all Vehicle Systems)

  MODULAR DESIGN (Provides Unprecedented Configurability)

  HIGH-VOLUME AIR-FLOW (Critical for Towing & Off-Road Performance)

  MAXIMUM QUALITY FASTENERS (Blackened + SS316 or High-Tensile)

  WEDGE-LOCK WASHERS (Blackened + SS316)

  DURABLE POWDER COAT FINISH (Advanced Polyester Thermosetting Powder)

  E-COAT (Industry Leading Corrosion Protection)

  EASY INSTALLATION (Difficulty = 5/10 or 6/10 for Summit)
  SPECIFICATIONS

  28.5kg	INSTALLED WEIGHT --> (BASE)
  33.3kg	INSTALLED WEIGHT --> Bare Bones Edition
  37.5kg	INSTALLED WEIGHT --> Overland Edition
  53.4kg	INSTALLED WEIGHT --> Tactical Edition (2011-2015)
  54.2kg	INSTALLED WEIGHT --> Tactical Edition (2016+)
  54.4kg	INSTALLED WEIGHT --> Stealth Edition (2011-2015) [LIMITED]
  55.2kg	INSTALLED WEIGHT --> Stealth Edition (2016+) [LIMITED]
  54.4kg	INSTALLED WEIGHT --> Apex Edition (2011-2015)
  55.2kg	INSTALLED WEIGHT --> Apex Edition (2016+)
  +0.1°	APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk)
  +6.5°	APPROACH ANGLE (Summit & SRT)

  *  Approach Angle calculations represent improvement over stock (based on stock tyres and air suspension in STD height). Raising the air suspension or installing larger tyres will increase the approach angle improvements.
  INCLUDES

  (BASE)

  1	(BASE)
  0	WK2 CHASSIS MOUNTS (Front) --> NOT INCLUDED (REQUIRED FOR INSTALL)
  1	Installation Instructions

  BARE BONES EDITION

  1	(BASE)
  1	WK2 CHASSIS MOUNTS (Front)
  1	WK2 OFF-ROAD FRONT BUMPER (Nomad Grille)
  1	Installation Instructions

  OVERLAND EDITION

  1	(BASE)
  1	WK2 CHASSIS MOUNTS (Front)
  1	WK2 OFF-ROAD FRONT BUMPER (Apex Grille) [SILVER]
  1	WK2 OFF-ROAD FRONT BUMPER (Mach II Aero-Bar) [SILVER]
  1	Installation Instructions

  TACTICAL EDITION (2011-2015)

  1	(BASE)
  1	WK2 CHASSIS MOUNTS (Front)
  1	WINCH CRADLE (2011-2015)
  1	WK2 OFF-ROAD FRONT BUMPER (Nomad Grille)
  1	WK2 OFF-ROAD FRONT BUMPER (Mach II Aero-Bar) [SILVER]
  1	WK2 OFF-ROAD FRONT BUMPER (Fusion Fairlead) [GUNMETAL]
  1	Installation Instructions

  TACTICAL EDITION (2016+)

  1	(BASE)
  1	WK2 CHASSIS MOUNTS (Front)
  1	WINCH CRADLE (2016+)
  1	WK2 OFF-ROAD FRONT BUMPER (Nomad Grille)
  1	WK2 OFF-ROAD FRONT BUMPER (Mach II Aero-Bar) [SILVER]
  1	WK2 OFF-ROAD FRONT BUMPER (Fusion Fairlead) [GUNMETAL]
  1	Installation Instructions

  STEALTH EDITION (2011-2015) [LIMITED]

  1	(BASE)
  1	WK2 CHASSIS MOUNTS (Front)
  1	WINCH CRADLE (2011-2015)
  1	WK2 OFF-ROAD FRONT BUMPER (Apex Grille) [BLACK]
  1	WK2 OFF-ROAD FRONT BUMPER (Mach II Aero-Bar) [BLACK]
  1	WK2 OFF-ROAD FRONT BUMPER (Fusion Fairlead) [BLACK]
  1	Installation Instructions

  STEALTH EDITION (2016+) [LIMITED]

  1	(BASE)
  1	WK2 CHASSIS MOUNTS (Front)
  1	WINCH CRADLE (2016+)
  1	WK2 OFF-ROAD FRONT BUMPER (Apex Grille) [BLACK]
  1	WK2 OFF-ROAD FRONT BUMPER (Mach II Aero-Bar) [BLACK]
  1	WK2 OFF-ROAD FRONT BUMPER (Fusion Fairlead) [BLACK]
  1	Installation Instructions

  APEX EDITION (2011-2015)

  1	(BASE)
  1	WK2 CHASSIS MOUNTS (Front)
  1	WINCH CRADLE (2011-2015)
  1	WK2 OFF-ROAD FRONT BUMPER (Apex Grille) [SILVER]
  1	WK2 OFF-ROAD FRONT BUMPER (Mach II Aero-Bar) [SILVER]
  1	WK2 OFF-ROAD FRONT BUMPER (Fusion Fairlead) [SILVER]
  1	Installation Instructions

  APEX EDITION (2016+)

  1	(BASE)
  1	WK2 CHASSIS MOUNTS (Front)
  1	WINCH CRADLE (2016+)
  1	WK2 OFF-ROAD FRONT BUMPER (Apex Grille) [SILVER]
  1	WK2 OFF-ROAD FRONT BUMPER (Mach II Aero-Bar) [SILVER]
  1	WK2 OFF-ROAD FRONT BUMPER (Fusion Fairlead) [SILVER]
  1	Installation Instructions

  EDITIONS

  (BASE)

  COMING SOON (more info soon).

  BARE BONES EDITION

  COMING SOON (more info soon).

  OVERLAND EDITION

  COMING SOON (more info soon).

  TACTICAL EDITION (2011-2015)

  COMING SOON (more info soon).

  TACTICAL EDITION (2016+)

  COMING SOON (more info soon).

  STEALTH EDITION (2011-2015) [LIMITED]

  COMING SOON (more info soon).

  STEALTH EDITION (2016+) [LIMITED]

  COMING SOON (more info soon).

  APEX EDITION (2011-2015)

  COMING SOON (more info soon).

  APEX EDITION (2016+)

  COMING SOON (more info soon).
• HIGH-STRENGTH OFF-ROAD PROTECTION

  EXCELLENT APPROACH ANGLE

  HIGH-FLOW COOLING PERFORMANCE

  LOW INSTALLED WEIGHT

  VEHICLE INTEGRATED DESIGN

  UNPRECEDENTED CONFIGURABILITY

  INNOVATIVE SUITE OF ACCESSORIES

  EASILY MOUNT ACCESSORIES

  VEHICLE COMPATIBILITY

  COMPATIBLE with ALL VEHICLE SYSTEMS

  COMPATIBLE with FRONT RECOVERY POINTS

  COMPATIBLE with MOST WINCHES

  STYLE

  FIT & FINISH

  EASY TO INSTALL

  INDUSTRY LEADING CORROSION PROTECTION

  MAXIMUM QUALITY FASTENERS

  REAL WORLD TESTING

  TOP QUALITY FINISHING TOUCHES
• Bolts to existing mounting points on the chassis. No drilling or cutting of metal parts required. Installation requires cutting/modification of the plastic bumper.
  Fitment confirmed on the following vehicles:

  2011 Jeep Grand Cherokee --> (All Models & Limited Editions)

  2012 Jeep Grand Cherokee --> (All Models & Limited Editions)

  2013 Jeep Grand Cherokee --> (All Models & Limited Editions)

  2014 Jeep Grand Cherokee --> (All Models & Limited Editions)

  2015 Jeep Grand Cherokee --> (All Models & Limited Editions)

  2016 Jeep Grand Cherokee --> (All Models & Limited Editions)

  2017 Jeep Grand Cherokee --> (All Models & Limited Editions)

  2018 Jeep Grand Cherokee --> (All Models & Limited Editions)

  2019 Jeep Grand Cherokee --> (All Models & Limited Editions)

  2020 Jeep Grand Cherokee --> (All Models & Limited Editions)

  2021 Jeep Grand Cherokee --> (All Models & Limited Editions)

  *  Fits USA & Export models.

  **  Fitment on Laredo, Limited, Overland & Trailhawk (including all models with same lower front fascia) requires permanent removal of the lower front fascia and minimal cutting of the plastic bumper.

  ***  Fitment on Summit, High Altitude & SRT (including all models with same lower front fascia) requires permanent removal of the lower front fascia and extensive cutting of the plastic bumper (lower portion).
  Fitment unconfirmed on the following vehicles:

  2018-2020 Jeep Grand Cherokee - Trackhawk
  Fitment confirmed with the following products:

  WK2 SUMP PROTECTION PLATE

  WK2 RECOVERY POINT

  WK2 RECOVERY HOOK

  WK2 WINCH CRADLE

  WK2 CHASSIS MOUNTS (Front)   Manufactured after MAY 2021 (SKU = CP217000-1000-00-R03)
  Product does NOT fit with the following products:

  WK2 LOWER FRONT GUARD

  WK2 NUDGE BAR

  WK2 CHASSIS MOUNTS (Front)   Manufactured before MAY 2021 (SKU = CP217000-1000-00-R02)

  WK2 HIDDEN WINCH MOUNT (Mounting Brackets)   (SKU = CP217000-1000-00-R01)

  JEEP AUSTRALIA TOW HOOK  (part# CH8220WKRH or AUSWK14HOOK)

  *  WK2 OFF-ROAD FRONT BUMPER does not fit with WK2 LOWER FRONT GUARD or WK2 NUDGE BAR. It is designed as an alternative to these products.
  INSTALLATION INSTRUCTIONS

  [DOWNLOAD]
• Can I Install The WK2 OFF-ROAD FRONT BUMPER Myself?

  Forged In Australia?

  What Warranty Do You Provide?

  How Do You Remove The Lower Front Fascia?

  What's The Optimum Order Of Installation For Multiple WK2 Products?

  What Products Are Compatible With Luxury Model WK2s (Summit, High Altitude, SRT, etc.)?

  COMPATIBILITY --> OEM TOW HOOKS

  [COMING SOON] What Winches Do You Recommend?

  [COMING SOON] Do I Need A Wireless Winch?

  [COMING SOON] Will My Winch Fit?

  [COMING SOON] Will My Fairlead Fit?

An installation kit for the WK2 Off-Road Front Bumper. It provides the required mounting bracketry & hardware for the Adaptive Cruise Control Camera.

Chief Products WK2 ROOF RACK (Aero) delivers enhanced styling and aerodynamic performance. Engineered to reduce wind noise by restricting the amount of high-velocity air flowing through the confined space underneath your roof rack (diverting high-velocity air up and over your roof rack).

Ideal for customers wanting optimum aerodynamic performance in high-wind conditions, cross-wind conditions, or regular high-speed driving. WK2 ROOF RACK (Aero) can be used as a replacement for the ROOF RACK (Stealth Air Dam) or in combination.

* ROOF RACK (Stealth Air Dam) provides excellent performance for most customers and is included with every set of Chief Products Mounting Rails.

Chief Products WK2 ROOF RACK (Mounting Rails) act as the framework for our Modular Roof Rack System. Our unique modular approach, enables customers to build the roof rack they want, and easily reconfigure it whenever their needs change. Customers can have one configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). Customers get one roof rack, that can easily adapt to their needs.

Engineering our Mounting Rails as a key roof rack component, provides another important advantage; industry-leading load ratings (150kg dynamic & 600kg static). Our unique engineering approach, utilises a boxed design that resists deformation at any singular point, which helps transfer forces to the strongest points on the vehicle roof. When our Mounting Rails are combined with our Planks and Half-Planks, we're able to deliver a Modular Roof Rack System that provides customers with an unrivalled combination of modularity and strength.

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WL74 Roof Rack provides the pinnacle of performance for roof rack systems on the WL74 (Jeep Grand Cherokee, 2022-Current). It delivers industry-leading load ratings (150kg dynamic & 460kg static) and vehicle specific styling in a light-weight, low-profile design. Our Modular Roof Rack System provides an unrivalled amount of configurability. Customers can build the roof rack they want, and easily reconfigure it whenever their needs change. One configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). One roof rack; that can easily adapt to your needs.

  We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to keep the overall installed weight low and accomplish a degree of fit-and-finish you have to see in person to truly appreciate. The smooth top surface, low profile design and hidden fasteners have enabled us to deliver an extremely aerodynamic roof rack. Amazingly, even after thousands of kilometres of off-road driving, you won't hear any creaking or rattling. Best of all, we made it extremely easy to mount accessories - whether you're using t-nuts that slide the entire length of the Planks; or our industry-leading Tie-Down Plates that easily slide and clamp between the Planks. If you're looking for a top-quality place to carry extra gear on your next adventure, there's no doubt we've got you covered.

  FEATURES

  MODULAR DESIGN (Mix-And-Match Components)

  GROUNDBREAKING CONFIGURABILITY (Easily Move & Change Components)

  HIGH-STRENGTH (Industry-Leading Load Ratings)

  TOP-QUALITY MATERIALS (Aircraft-Grade Aluminium Alloys + High-Strength Steel)

  INDUSTRY-LEADING DURABILITY (High-Strength + Corrosion Protection + UV Stable Coatings)

  INDUSTRY-LEADING CORROSION PROTECTION (Special Coatings, Materials & Hardware)

  EASILY MOUNT ACCESSORIES (Adjustable Planks, T-Nuts & Tie-Down Plates)

  PREMIUM ACCESSORIES (Top-Quality, Innovative & 3rd Party Compatibility)

  VEHICLE SPECIFIC STYLING (Mounting Rails & Aero)

  STEALTH (Low Wind Noise + No Creaking/Rattling + Unobstructed Sunroof + Stealth Air Dam)

  TOP QUALITY FASTENERS (Blackened Stainless or High-Tensile + Wedge-Lock Washers)

  FIT & FINISH (Precision Manufacturing + Unrivalled QC Processes)

  EASY INSTALLATION (Difficulty = 2/10)
  SPECIFICATIONS

  100kg	DYNAMIC LOAD RATING (with 2x Half-Planks)
  300kg	STATIC LOAD RATING (with 2x Half-Planks)
  150kg	DYNAMIC LOAD RATING (with 2+ Planks)
  460kg	STATIC LOAD RATING (with 2+ Planks)
  86mm	OVERALL HEIGHT (above roof line)
  25mm	PLANK THICKNESS
  28.34mm	PLATFORM THICKNESS (fully assembled)
  1740mm	FULL PLATFORM LENGTH (fully assembled)
  1246mm	FULL PLATFORM WIDTH (fully assembled)
  9.4kg	INSTALLED WEIGHT --> Bare Bones
  9.4kg	INSTALLED WEIGHT --> Roof Top Tent [100-300kg]
  13.3kg	INSTALLED WEIGHT --> Roof Top Tent [150-460kg]
  17.2kg	INSTALLED WEIGHT --> Overland
  26.9kg	INSTALLED WEIGHT --> Safari
  31.6kg	INSTALLED WEIGHT --> Apex
  6.1kg	INSTALLED WEIGHT --> ((Build Your Own))

  INCLUDES

  
  

  BARE BONES
  

  1	WL74 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (4x Half-Plank End-Caps)
  1	Installation Instructions

  
  

  ROOF TOP TENT [100-300kg]

  1	WL74 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (4x Half-Plank End-Caps)
  1	Installation Instructions

  
  

  ROOF TOP TENT [150-460kg]

  1	WL74 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Planks) [1146mm]
  1	ROOF RACK (4x Plank End-Caps)
  1	ROOF RACK (Roof Top Tent KIT)
  1	Installation Instructions

  
  

  OVERLAND

  1	WL74 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Planks) [1146mm]
  1	ROOF RACK (4x Plank End-Caps)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (4x Half-Plank End-Caps)
  2	ROOF RACK (2x Tie-Down Plates)
  1	Installation Instructions

  
  

  SAFARI

  1	WL74 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  3	ROOF RACK (2x Planks) [1146mm]
  3	ROOF RACK (4x Plank End-Caps)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (4x Half-Plank End-Caps)
  1	Installation Instructions

  
  

  APEX

  1	WL74 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  3	ROOF RACK (2x Planks) [1146mm]
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (Platform Frame) [7 Plank]
  1	Installation Instructions

  
  

  ((BUILD YOUR OWN))

  1	WL74 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	Installation Instructions

  EDITIONS

  
  

  BARE BONES
  

  We start with our Mounting Rails, then we add (2) Half-Planks and (4) Half-Plank End Caps. Super simple. Super strong (industry-leading load ratings for such a simple setup - 100kg dynamic & 300kg static). No non-sense. Want to upgrade to a Safari, Roof Top Tent, Overland or Apex edition? No Problem. Want to run with a simple setup that looks awesome, and works as advertised. This is it!

  
  

  ROOF TOP TENT [100-300kg]

  We've developed (2) editions of our WL74 ROOF RACK for roof top tents. Our 100-300kg edition is the simplest and lightest version. Designed for customers that want a simple and easy setup for their roof top tent, and industry-leading load ratings (100kg dynamic & 300kg static). We start with our Mounting Rails, then we add (2) Half-Planks and (4) Half-Plank End-Caps. By using Half-Planks, we're able to keep the installed weight low, and make RTT installation super simple (most RTTs can easily clamp around our Half-Planks). Best of all, it's extremely easy to modify, upgrade or configure (just like every edition).

  
  

  ROOF TOP TENT [150-460kg]

  We've developed (2) editions of our WL74 ROOF RACK for roof top tents. Our 150-460kg edition is the strongest version. Designed for customers that want the strongest setup for their roof top tent. We start with our Mounting Rails, then we add (2) Planks and (4) Plank End-Caps. Then we add our Roof Top Tent KIT, to make your RTT installation super easy. By using our standard Planks, we're able to provide industry-leading load ratings (150kg dynamic & 460kg static) in a package that looks great and is super easy to install. Best of all, it's extremely easy to modify, upgrade or configure (just like every edition).

  
  

  OVERLAND

  Our Overland edition is designed to provide maximum functionality when Overlanding. We start with our Mounting Rails, then add (2) Planks, (4) Plank End-Caps, (2) Half-Planks, (4) Half-Plank End-Caps, and finish with (4) Tie-Down Plates. The modular design, allows you to easily configure your roof rack components (Planks, Half-Planks, etc.) to suit the needs of your current adventure. The Tie-Down Plates are designed to be multi-functional. They can accommodate numerous accessories and tie-down strap configurations. This edition delivers industry leading load ratings (150kg dynamic & 460kg static) and a nearly unlimited amount of mounting locations for accessories.

  
  

  SAFARI

  Our Safari edition is all about delivering maximum functionality. We start with our Mounting Rails, then add (6) Planks, (12) End-Caps, (2) Half-Planks, and (4) Half-Plank End-Caps. The modular design, allows you to easily configure your roof rack components (Planks, Half-Planks, etc.) to suit the needs of your current adventure. This edition delivers industry-leading load ratings (150kg dynamic & 460kg static) and a nearly unlimited amount of mounting locations for accessories.

  
  

  APEX

  The pinnacle of roof rack performance for the WL74. We start with our Mounting Rails, then add (6) Planks, (2) Half-Planks, and finish with our Platform Frame (smooth outside border that looks great, adds strength, and delivers the best aerodynamics possible). This edition delivers industry leading-load ratings (150kg dynamic & 460kg static) along with a nearly unlimited amount of mounting locations for accessories. Best of all, the Apex edition delivers industry-leading features with style (vehicle specific styling, smooth border, smooth top surface, amazing fit-n-finish, and fully hidden fasteners).

  
  

  ((BUILD YOUR OWN))

  Our Modular Roof Rack System allows customers to mix-and-match components to create the exact roof rack system they want. This edition starts with our Mounting Rails, and leaves the rest to you. You can add/change components to any of our roof rack editions, but if you want to build your roof rack from the ground up, this is the place to start.

  ---

  * WARNING *

  FOR MAXIMUM SAFETY DO NOT EXCEED MANUFACTURERS ROOF WEIGHT LIMITS. Our load ratings represent the maximum mechanical forces our roof rack system can withstand before failure. Our load ratings do not address vehicle safety during high-speed manoeuvres, or changes to vehicle dynamics caused by a higher centre of gravity.
  
  

  * CAUTION *

  For maximum safety, loads should be evenly distributed and properly secured to avoid shifting during transport. Before using your roof rack, it is important to familiarise yourself with the proper load securing techniques and be constantly safety oriented. Please note, all of our load ratings are based on an evenly distributed load.
• UNPRECEDENTED CONFIGURABILITY

  Choose how many Planks you want. Position your Planks wherever you want. Move your Planks easily, whenever you want. Choose if you want a frame around the outside. Choose how many Tie-Down Plates you want, and where you want them located. Configure your rack however you want. Numerous options. Numerous configurations.

  
  

  MODULAR DESIGN

  Our modular engineering approach allow us to deliver a roof rack system that can be easily adapted to any situation. It also means you can upgrade-downgrade your roof rack any time your needs require.

  
  

  HIGH-STRENGTH

  All versions deliver industry leading load ratings. These ratings were independently tested and the test results are certified to comply with Australian Standard (AS 1235-2000) as well as international standards (ISO / PAS 11154 : 2009:2006) and (DIN 75302/02: 1991). During independent testing, our roof rack system successfully withstood 330kg of upward force, 600kg of forward force (including a special 20° off-axis test). To achieve our certification we needed to have less than 10mm of movement in our structure at the tested loads, we had 0.17mm!
  
  One of the keys to our industry leading load ratings is our Mounting Rails. Not only do they transfer forces to the strongest points on the vehicle roof, they also utilise a boxed design that resists deformation at any singular point. This unique design element creates a 'mounting system’ that is much stronger than any of our competitors.

  
  

  LOW WEIGHT

  We utilise the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a roof rack system with an extremely high strength-to-weight ratio. This means our roof rack has an extremely low weight, while still being the very strongest on the market.

  
  

  STEALTH

  Chief Products roof racks are engineered to be extremely aerodynamic (smooth top surface, low profile design and hidden fasteners). These unique aerodynamic features make our roof racks extremely quiet for the majority of our customers. However, the more wind you have the more wind noise will increase. For customers that live in high-wind areas or regularly drive at high-speeds (120kmh+) we've developed a Stealth Air Dam (included with every set of Mounting Rails) that significantly reduces the noise caused by high-velocity air flows. Best of all, this wind noise performance improvement is accomplished utilising a product that mounts out-of-sight (ensuring it doesn't inhibit use of your rack, or obscure views out of your sunroof).
  
  Our roof racks deliver an experience with no creaking, no rattling, and very low wind noise. We accomplish these amazing feats through a series of technologically advanced aerodynamic methods, along with some proven old school tech (rubber isolators).

  
  

  LOW PROFILE

  Our roof racks are engineered to sit incredibly low at only 86mm above the roofline. We looked at mounting even closer to the vehicle, but during our real-world testing we found it was helpful to have a slight gap between the roof and the rack, so you can slip a hand underneath the rack to wash your roof.

  
  

  UNOBSTRUCTED VIEWS

  If your vehicle has a Sunroof, our roof rack won’t block your view (position your Planks wherever you want) so you can see and experience the beauty of the nature around you.

  
  

  STYLE

  We poured over every design detail to ensure the WL74 Roof Rack would look great from every angle. Function was our primary aim, but we also studied every line and every proportion, paying close attention to how they integrate with the lines of the WL74.

  
  

  FIT & FINISH

  We utilise advanced manufacturing techniques to achieve a degree of fit-and-finish you have to see in-person to truly appreciate.

  
  

  SMOOTH TOP SURFACE

  The top of our platform is completely smooth. No bolt heads sticking up, tie-down plates that sit completely flush and fasteners that are hidden from view.

  
  

  EASILY MOUNT ACCESSORIES

  We make it extremely easy to mount your accessories and bring your gear with you. We provide (2) full-length channels in each plank, enabling you to use T-Nuts that slide the entire length of the Planks. Even better, is our industry leading Tie-Down Plates and Anchor Points. They provide numerous mounting options and easily slide and clamp between the Planks.

  
  

  TIE-DOWN PLATES

  One of the primary usability goals for our roof racks, was that you could easily bolt/fasten/tie-down to the rack at almost any location. Our custom engineered Tie-Down Plates deliver on that goal. They clamp securely between the Planks in a way that allows them to easily move and fasten anywhere along the entire length of the Planks. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to fasten/bolt just about any accessory you can find. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your platform.

  
  

  NEARLY UNLIMITED ACCESSORY MOUNTING LOCATIONS

  We provide heaps of mounting locations so you can easily mount accessories anywhere. To achieve that goal, we've engineered Planks you can move wherever you need them. Then we've provided two full-length channels in each Plank for captive T-Nuts, allowing you to bolt/fasten to the Plank at any point along the entire length of the Plank. Finally, for maximum flexibility we've delivered Tie-Down Plates that can easily move and fasten anywhere along the entire length of the Planks.

  
  

  COMPATIBLE WITH MOST ACCESSORIES

  If the accessory uses M6, M8 or M10 bolts for mounting, it will probably work with our roof rack system. If not, one of our upcoming adapter kits should take care of business.

  
  

  INNOVATIVE SUITE OF ACCESSORIES

  Chief Products engineering team has already started work on several innovative accessories to further expand the functionality of our roof rack system. Taking advantage of our ground-up approach and modular design is allowing us to develop roof rack accessories that no one has ever seen before.

  
  

  INDUSTRY LEADING CORROSION PROTECTION

  We utilise aircraft-grade aluminium alloys (highly corrosion resistant) for all of the major components of our roof rack system (with a layer of UV stable highly durable powder coat to provide additional protection). For all of our steel parts we utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts, then we add a layer of UV stable powder coat on top for additional protection. All of the included fasteners are protected as well - black zinc plating, zinc flake coatings, black oxide coatings or sometimes we just choose to use stainless steel fasteners. Our aim is to keep your roof rack looking great for many years to come.

  
  

  EASY TO INSTALL

  Easy bolt-on installation with no drilling. In addition, our bracketry is fully adjustable so it adapts to your roof.

  
  

  TOP QUALITY FINISHING TOUCHES

  We include all the details that matter. High tensile bolts for maximum strength. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening (critical to combat loosening from off-roading vibrations). Anti-Seize for bolted joints that are resistant to seizing (important for a product that sits on your roof fully exposed to the elements). A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
  
  We even include a few details you might not appreciate right away. For instance, if you’re installing lights, we provide channels in our mounting rails to run your wiring, (we even provide small holes for your zip ties, so you can hold your wiring up out of sight).
• No drilling or cutting required. Bolts to the roof using the existing roof nutserts provided by Jeep. Removal of OEM plastic roof rails required.
  Fitment confirmed on the following vehicles:

  2022 Jeep Grand Cherokee --> All Models & Limited Editions

  2023 Jeep Grand Cherokee --> All Models & Limited Editions

  2024 Jeep Grand Cherokee --> All Models & Limited Editions
  Compatible with the following products:

  This list is based on customer reports, Chief Products has not confirmed fitment of these products. This list will be updated regularly as customers report their experiences.
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Can I Install This Product Myself?

  Forged In Australia?

  What Warranty Do You Provide?

  Will My Roof Rack Develop Creaks and Rattles?

  WIND NOISE --- Understanding & Addressing Common Causes

  ROOF RACK --- Load Ratings Explained

Chief Products WL74 ROOF RACK (Mounting Rails) act as the framework for our Modular Roof Rack System. Our unique modular approach, enables customers to build the roof rack they want, and easily reconfigure it whenever their needs change. Customers can have one configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). Customers get one roof rack, that can easily adapt to their needs.

Engineering our Mounting Rails as a key roof rack component, provides another important advantage; industry-leading load ratings (150kg dynamic & 460kg static). Our unique engineering approach, utilises a boxed design that resists deformation at any singular point, which helps transfer forces to the strongest points on the vehicle roof. When our Mounting Rails are combined with our Planks and Half-Planks, we're able to deliver a Modular Roof Rack System that provides customers with an unrivalled combination of modularity and strength.

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WL75 Roof Rack provides the pinnacle of performance for roof rack systems on the WL75 (Jeep Grand Cherokee, 2021-Current). It delivers industry-leading load ratings (150kg dynamic & 460kg static) and vehicle specific styling in a light-weight, low-profile design. Our Modular Roof Rack System provides an unrivalled amount of configurability. Customers can build the roof rack they want, and easily reconfigure it whenever their needs change. One configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). One roof rack; that can easily adapt to your needs.

  We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to keep the overall installed weight low and accomplish a degree of fit-and-finish you have to see in person to truly appreciate. The smooth top surface, low profile design and hidden fasteners have enabled us to deliver an extremely aerodynamic roof rack. Amazingly, even after thousands of kilometres of off-road driving, you won't hear any creaking or rattling. Best of all, we made it extremely easy to mount accessories - whether you're using t-nuts that slide the entire length of the Planks; or our industry-leading Tie-Down Plates that easily slide and clamp between the Planks. If you're looking for a top-quality place to carry extra gear on your next adventure, there's no doubt we've got you covered.

  FEATURES

  MODULAR DESIGN (Mix-And-Match Components)

  GROUNDBREAKING CONFIGURABILITY (Easily Move & Change Components)

  HIGH-STRENGTH (Industry-Leading Load Ratings)

  TOP-QUALITY MATERIALS (Aircraft-Grade Aluminium Alloys + High-Strength Steel)

  INDUSTRY-LEADING DURABILITY (High-Strength + Corrosion Protection + UV Stable Coatings)

  INDUSTRY-LEADING CORROSION PROTECTION (Special Coatings, Materials & Hardware)

  EASILY MOUNT ACCESSORIES (Adjustable Planks, T-Nuts & Tie-Down Plates)

  PREMIUM ACCESSORIES (Top-Quality, Innovative & 3rd Party Compatibility)

  VEHICLE SPECIFIC STYLING (Mounting Rails & Aero)

  STEALTH (Low Wind Noise + No Creaking/Rattling + Unobstructed Sunroof + Stealth Air Dam)

  TOP QUALITY FASTENERS (Blackened Stainless or High-Tensile + Wedge-Lock Washers)

  FIT & FINISH (Precision Manufacturing + Unrivalled QC Processes)

  EASY INSTALLATION (Difficulty = 2/10)
  SPECIFICATIONS

  100kg	DYNAMIC LOAD RATING (with 2x Half-Planks)
  300kg	STATIC LOAD RATING (with 2x Half-Planks)
  150kg	DYNAMIC LOAD RATING (with 2+ Planks)
  460kg	STATIC LOAD RATING (with 2+ Planks)
  86mm	OVERALL HEIGHT (above roof line)
  25mm	PLANK THICKNESS
  28.34mm	PLATFORM THICKNESS (fully assembled)
  1990mm	FULL PLATFORM LENGTH (fully assembled)
  1246mm	FULL PLATFORM WIDTH (fully assembled)
  10.2kg	INSTALLED WEIGHT --> Bare Bones
  10.2kg	INSTALLED WEIGHT --> Roof Top Text [100-300kg]
  14.1kg	INSTALLED WEIGHT --> Roof Top Text [150-460kg]
  18.0kg	INSTALLED WEIGHT --> Overland
  30.2kg	INSTALLED WEIGHT --> Safari
  34.8kg	INSTALLED WEIGHT --> Apex
  6.9kg	INSTALLED WEIGHT --> ((Build Your Own))

  INCLUDES

  
  

  BARE BONES
  

  1	WL75 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (4x Half-Plank End-Caps)
  1	Installation Instructions

  
  

  ROOF TOP TENT [100-300kg]

  1	WL75 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (4x Half-Plank End-Caps)
  1	Installation Instructions

  
  

  ROOF TOP TENT [150-460kg]

  1	WL75 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Planks) [1146mm]
  1	ROOF RACK (4x Plank End-Caps)
  1	ROOF RACK (Roof Top Tent KIT)
  1	Installation Instructions

  
  

  OVERLAND

  1	WL75 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Planks) [1146mm]
  1	ROOF RACK (4x Plank End-Caps)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (4x Half-Plank End-Caps)
  2	ROOF RACK (2x Tie-Down Plates)
  1	Installation Instructions

  
  

  SAFARI

  1	WL75 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  4	ROOF RACK (2x Planks) [1146mm]
  4	ROOF RACK (4x Plank End-Caps)
  1	Installation Instructions

  
  

  APEX

  1	WL75 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  4	ROOF RACK (2x Planks) [1146mm]
  1	ROOF RACK (Platform Frame) [8 Plank]
  1	Installation Instructions

  
  

  ((BUILD YOUR OWN))

  1	WL75 ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	Installation Instructions

  EDITIONS

  
  

  BARE BONES
  

  We start with our Mounting Rails, then we add (2) Half-Planks and (4) Half-Plank End Caps. Super simple. Super strong (industry-leading load ratings for such a simple setup - 100kg dynamic & 300kg static). No non-sense. Want to upgrade to a Safari, Roof Top Tent, Overland or Apex edition? No Problem. Want to run with a simple setup that looks awesome, and works as advertised. This is it!

  
  

  ROOF TOP TENT [100-300kg]

  We've developed (2) editions of our WL75 ROOF RACK for roof top tents. Our 100-300kg edition is the simplest and lightest version. Designed for customers that want a simple and easy setup for their roof top tent, and industry-leading load ratings (100kg dynamic & 300kg static). We start with our Mounting Rails, then we add (2) Half-Planks and (4) Half-Plank End-Caps. By using Half-Planks, we're able to keep the installed weight low, and make RTT installation super simple (most RTTs can easily clamp around our Half-Planks). Best of all, it's extremely easy to modify, upgrade or configure (just like every edition).

  
  

  ROOF TOP TENT [150-460kg]

  We've developed (2) editions of our WL75 ROOF RACK for roof top tents. Our 150-460kg edition is the strongest version. Designed for customers that want the strongest setup for their roof top tent. We start with our Mounting Rails, then we add (2) Planks and (4) Plank End-Caps. Then we add our Roof Top Tent KIT, to make your RTT installation super easy. By using our standard Planks, we're able to provide industry-leading load ratings (150kg dynamic & 460kg static) in a package that looks great and is super easy to install. Best of all, it's extremely easy to modify, upgrade or configure (just like every edition).

  
  

  OVERLAND

  Our Overland edition is designed to provide maximum functionality when Overlanding. We start with our Mounting Rails, then add (2) Planks, (4) Plank End-Caps, (2) Half-Planks, (4) Half-Plank End-Caps, and finish with (4) Tie-Down Plates. The modular design, allows you to easily configure your roof rack components (Planks, Half-Planks, etc.) to suit the needs of your current adventure. The Tie-Down Plates are designed to be multi-functional. They can accommodate numerous accessories and tie-down strap configurations. This edition delivers industry leading load ratings (150kg dynamic & 460kg static) and a nearly unlimited amount of mounting locations for accessories.

  
  

  SAFARI

  Our Safari edition is all about delivering maximum functionality. We start with our Mounting Rails, then add (8) Planks and (16) End-Caps. The modular design, allows you to easily configure your roof rack components (Planks, Half-Planks, etc.) to suit the needs of your current adventure. This edition delivers industry-leading load ratings (150kg dynamic & 460kg static) and a nearly unlimited amount of mounting locations for accessories.

  
  

  APEX

  The pinnacle of roof rack performance for the WL75. We start with our Mounting Rails, then add (8) Planks and our Platform Frame (smooth outside border that looks great, adds strength, and delivers the best aerodynamics possible). This edition delivers industry leading-load ratings (150kg dynamic & 460kg static) along with a nearly unlimited amount of mounting locations for accessories. Best of all, the Apex edition delivers industry-leading features with style (vehicle specific styling, smooth border, smooth top surface, amazing fit-n-finish, and fully hidden fasteners).

  
  

  ((BUILD YOUR OWN))

  Our Modular Roof Rack System allows customers to mix-and-match components to create the exact roof rack system they want. This edition starts with our Mounting Rails, and leaves the rest to you. You can add/change components to any of our roof rack editions, but if you want to build your roof rack from the ground up, this is the place to start.

  ---

  * WARNING *

  FOR MAXIMUM SAFETY DO NOT EXCEED MANUFACTURERS ROOF WEIGHT LIMITS. Our load ratings represent the maximum mechanical forces our roof rack system can withstand before failure. Our load ratings do not address vehicle safety during high-speed manoeuvres, or changes to vehicle dynamics caused by a higher centre of gravity.
  
  

  * CAUTION *

  For maximum safety, loads should be evenly distributed and properly secured to avoid shifting during transport. Before using your roof rack, it is important to familiarise yourself with the proper load securing techniques and be constantly safety oriented. Please note, all of our load ratings are based on an evenly distributed load.
• UNPRECEDENTED CONFIGURABILITY

  Choose how many Planks you want. Position your Planks wherever you want. Move your Planks easily, whenever you want. Choose if you want a frame around the outside. Choose how many Tie-Down Plates you want, and where you want them located. Configure your rack however you want. Numerous options. Numerous configurations.

  
  

  MODULAR DESIGN

  Our modular engineering approach allow us to deliver a roof rack system that can be easily adapted to any situation. It also means you can upgrade-downgrade your roof rack any time your needs require.

  
  

  HIGH-STRENGTH

  All versions deliver industry leading load ratings. These ratings were independently tested and the test results are certified to comply with Australian Standard (AS 1235-2000) as well as international standards (ISO / PAS 11154 : 2009:2006) and (DIN 75302/02: 1991). During independent testing, our roof rack system successfully withstood 330kg of upward force, 600kg of forward force (including a special 20° off-axis test). To achieve our certification we needed to have less than 10mm of movement in our structure at the tested loads, we had 0.17mm!
  
  One of the keys to our industry leading load ratings is our Mounting Rails. Not only do they transfer forces to the strongest points on the vehicle roof, they also utilise a boxed design that resists deformation at any singular point. This unique design element creates a 'mounting system’ that is much stronger than any of our competitors.

  
  

  LOW WEIGHT

  We utilise the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a roof rack system with an extremely high strength-to-weight ratio. This means our roof rack has an extremely low weight, while still being the very strongest on the market.

  
  

  STEALTH

  Chief Products roof racks are engineered to be extremely aerodynamic (smooth top surface, low profile design and hidden fasteners). These unique aerodynamic features make our roof racks extremely quiet for the majority of our customers. However, the more wind you have the more wind noise will increase. For customers that live in high-wind areas or regularly drive at high-speeds (120kmh+) we've developed a Stealth Air Dam (included with every set of Mounting Rails) that significantly reduces the noise caused by high-velocity air flows. Best of all, this wind noise performance improvement is accomplished utilising a product that mounts out-of-sight (ensuring it doesn't inhibit use of your rack, or obscure views out of your sunroof).
  
  Our roof racks deliver an experience with no creaking, no rattling, and very low wind noise. We accomplish these amazing feats through a series of technologically advanced aerodynamic methods, along with some proven old school tech (rubber isolators).

  
  

  LOW PROFILE

  Our roof racks are engineered to sit incredibly low at only 86mm above the roofline. We looked at mounting even closer to the vehicle, but during our real-world testing we found it was helpful to have a slight gap between the roof and the rack, so you can slip a hand underneath the rack to wash your roof.

  
  

  UNOBSTRUCTED VIEWS

  If your vehicle has a Sunroof, our roof rack won’t block your view (position your Planks wherever you want) so you can see and experience the beauty of the nature around you.

  
  

  STYLE

  We poured over every design detail to ensure the WL75 Roof Rack would look great from every angle. Function was our primary aim, but we also studied every line and every proportion, paying close attention to how they integrate with the lines of the WL75.

  
  

  FIT & FINISH

  We utilise advanced manufacturing techniques to achieve a degree of fit-and-finish you have to see in-person to truly appreciate.

  
  

  SMOOTH TOP SURFACE

  The top of our platform is completely smooth. No bolt heads sticking up, tie-down plates that sit completely flush and fasteners that are hidden from view.

  
  

  EASILY MOUNT ACCESSORIES

  We make it extremely easy to mount your accessories and bring your gear with you. We provide (2) full-length channels in each plank, enabling you to use T-Nuts that slide the entire length of the Planks. Even better, is our industry leading Tie-Down Plates and Anchor Points. They provide numerous mounting options and easily slide and clamp between the Planks.

  
  

  TIE-DOWN PLATES

  One of the primary usability goals for our roof racks, was that you could easily bolt/fasten/tie-down to the rack at almost any location. Our custom engineered Tie-Down Plates deliver on that goal. They clamp securely between the Planks in a way that allows them to easily move and fasten anywhere along the entire length of the Planks. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to fasten/bolt just about any accessory you can find. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your platform.

  
  

  NEARLY UNLIMITED ACCESSORY MOUNTING LOCATIONS

  We provide heaps of mounting locations so you can easily mount accessories anywhere. To achieve that goal, we've engineered Planks you can move wherever you need them. Then we've provided two full-length channels in each Plank for captive T-Nuts, allowing you to bolt/fasten to the Plank at any point along the entire length of the Plank. Finally, for maximum flexibility we've delivered Tie-Down Plates that can easily move and fasten anywhere along the entire length of the Planks.

  
  

  COMPATIBLE WITH MOST ACCESSORIES

  If the accessory uses M6, M8 or M10 bolts for mounting, it will probably work with our roof rack system. If not, one of our upcoming adapter kits should take care of business.

  
  

  INNOVATIVE SUITE OF ACCESSORIES

  Chief Products engineering team has already started work on several innovative accessories to further expand the functionality of our roof rack system. Taking advantage of our ground-up approach and modular design is allowing us to develop roof rack accessories that no one has ever seen before.

  
  

  INDUSTRY LEADING CORROSION PROTECTION

  We utilise aircraft-grade aluminium alloys (highly corrosion resistant) for all of the major components of our roof rack system (with a layer of UV stable highly durable powder coat to provide additional protection). For all of our steel parts we utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts, then we add a layer of UV stable powder coat on top for additional protection. All of the included fasteners are protected as well - black zinc plating, zinc flake coatings, black oxide coatings or sometimes we just choose to use stainless steel fasteners. Our aim is to keep your roof rack looking great for many years to come.

  
  

  EASY TO INSTALL

  Easy bolt-on installation with no drilling. In addition, our bracketry is fully adjustable so it adapts to your roof.

  
  

  TOP QUALITY FINISHING TOUCHES

  We include all the details that matter. High tensile bolts for maximum strength. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening (critical to combat loosening from off-roading vibrations). Anti-Seize for bolted joints that are resistant to seizing (important for a product that sits on your roof fully exposed to the elements). A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
  
  We even include a few details you might not appreciate right away. For instance, if you’re installing lights, we provide channels in our mounting rails to run your wiring, (we even provide small holes for your zip ties, so you can hold your wiring up out of sight).
• No drilling or cutting required. Bolts to the roof using the existing roof nutserts provided by Jeep. Removal of OEM plastic roof rails required.
  Fitment confirmed on the following vehicles:

  2021 Jeep Grand Cherokee --> All Models & Limited Editions

  2022 Jeep Grand Cherokee --> All Models & Limited Editions

  2023 Jeep Grand Cherokee --> All Models & Limited Editions

  2024 Jeep Grand Cherokee --> All Models & Limited Editions
  Compatible with the following products:

  This list is based on customer reports, Chief Products has not confirmed fitment of these products. This list will be updated regularly as customers report their experiences.
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Can I Install This Product Myself?

  Forged In Australia?

  What Warranty Do You Provide?

  Will My Roof Rack Develop Creaks and Rattles?

  WIND NOISE --- Understanding & Addressing Common Causes

  ROOF RACK --- Load Ratings Explained

Chief Products WL75 ROOF RACK (Mounting Rails) act as the framework for our Modular Roof Rack System. Our unique modular approach, enables customers to build the roof rack they want, and easily reconfigure it whenever their needs change. Customers can have one configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). Customers get one roof rack, that can easily adapt to their needs.

Engineering our Mounting Rails as a key roof rack component, provides another important advantage; industry-leading load ratings (150kg dynamic & 460kg static). Our unique engineering approach, utilises a boxed design that resists deformation at any singular point, which helps transfer forces to the strongest points on the vehicle roof. When our Mounting Rails are combined with our Planks and Half-Planks, we're able to deliver a Modular Roof Rack System that provides customers with an unrivalled combination of modularity and strength.