The Store
We will remember your selection.
J300 ROOF RACK
Out of Stock Pre-Order $629.99 USD
Chief Products J300 ROOF RACK provides the pinnacle of performance for roof rack systems on the J300 (Toyota LandCruiser 300, 2021-Current). It delivers industry-leading load ratings (150kg dynamic & 460kg static) in an extremely light weight and low profile design.
-
Chief Products J300 ROOF RACK provides the pinnacle of performance for roof rack systems on the J300 (Toyota LandCruiser 300, 2021-Current). It delivers industry-leading load ratings (150kg dynamic & 460kg static) in an extremely light weight and low profile design.
MORE COMING SOON...
FEATURESMODULAR DESIGN (Mix-And-Match Components)GROUNDBREAKING CONFIGURABILITY (Easily Move & Change Components)HIGH-STRENGTH (Industry-Leading Load Ratings)TOP-QUALITY MATERIALS (Aircraft-Grade Aluminium Alloys + High-Strength Steel)INDUSTRY-LEADING CORROSION PROTECTION (Special Coatings, Materials & Hardware)PREMIUM ACCESSORIES (Top-Quality, Innovative & 3rd Party Compatibility)AERODYNAMIC PERFORMANCE (Low Profile, Rounded Edges & Stealth Air Dam)VEHICLE SPECIFIC STYLING (Mounting Rails & Aero)EASILY MOUNT ACCESSORIES (Adjustable Planks, T-Nuts & Tie-Down Plates)EASY INSTALLATION (Difficulty = 3/10)SPECIFICATIONS100-150kg DYNAMIC LOAD RATING [Independently Certified] 300-460kg STATIC LOAD RATING [Independently Certified] TBA OVERALL HEIGHT (above roof line) 25mm PLANK THICKNESS 28.34mm PLATFORM THICKNESS (fully assembled) TBA FULL PLATFORM LENGTH (fully assembled) 1246mm FULL PLATFORM WIDTH (fully assembled) TBA INSTALLED WEIGHT --> BARE BONES TBA INSTALLED WEIGHT --> ROOF TOP TENT [100-300kg] TBA INSTALLED WEIGHT --> ROOF TOP TENT [150-460kg] TBA INSTALLED WEIGHT --> OVERLAND TBA INSTALLED WEIGHT --> SAFARI TBA INSTALLED WEIGHT --> APEX TBA PRODUCT WEIGHT --> ((BUILD YOU OWN)) INCLUDES
1 TBA 1 TBA 3 TBA 1 TBA 1 Installation Instructions [COMING SOON] 1 TBA 1 TBA 3 TBA 3 TBA 1 Installation Instructions [COMING SOON] 1 TBA 1 TBA 2 TBA 2 TBA 1 Installation Instructions [COMING SOON] 1 TBA 1 TBA 1 TBA 1 TBA 1 Installation Instructions [COMING SOON] 1 TBA 1 TBA 1 TBA 1 TBA 1 Installation Instructions [COMING SOON] 3 TBA 1 TBA 3 TBA 1 TBA 1 Installation Instructions [COMING SOON] EDITIONS* WARNING *
FOR MAXIMUM SAFETY DO NOT EXCEED MANUFACTURERS ROOF WEIGHT LIMITS. Our load ratings represent the maximum mechanical forces our roof rack system can withstand before failure. Our load ratings do not address vehicle safety during high-speed manoeuvres, or changes to vehicle dynamics caused by a higher centre of gravity.
* CAUTION *
For maximum safety, loads should be evenly distributed and properly secured to avoid shifting during transport. Before using your roof rack, it is important to familiarise yourself with the proper load securing techniques and be constantly safety oriented. Please note, all of our load ratings are based on an evenly distributed load. -
ONETBA
TWOTBA
THREETBA
FOURTBA
FIVETBA
SIXTBA
SEVENTBA
EIGHTTBA
NINETBA
TENTBA
ELEVENTBA
TWELVETBA
THIRTEENTBA
FOURTEENTBA
FIFTEENTBA
SIXTEENTBA
SEVENTEENTBA -
Bolts to the roof using the existing roof nutserts provided by Toyota, no drilling or cutting required.J300 ROOF RACK fits the following vehicles:2021 Toyota LandCruiser 3002022 Toyota LandCruiser 3002023 Toyota LandCruiser 3002024 Toyota LandCruiser 300J300 ROOF RACK is compatible with the following products:This list is based on customer reports, Chief Products has not confirmed fitment of these products. This list will be updated regularly as customers report their experiences.INSTALLATION INSTRUCTIONS
N280 ROOF RACK
Out of Stock Pre-Order $515.99 USD
Chief Products N280 ROOF RACK provides the pinnacle of performance for roof rack systems on the N280 (Toyota 4Runner, 2010-Current). It delivers industry-leading load ratings (150kg dynamic & 460kg static) in an extremely light weight and low profile design.
-
Chief Products N280 ROOF RACK provides the pinnacle of performance for roof rack systems on the N280 (Toyota 4Runner, 2010-Current). It delivers industry-leading load ratings (150kg dynamic & 460kg static) in an extremely light weight and low profile design.
MORE COMING SOON...
FEATURESMODULAR DESIGN (Mix-And-Match Components)GROUNDBREAKING CONFIGURABILITY (Easily Move & Change Components)HIGH-STRENGTH (Industry-Leading Load Ratings)TOP-QUALITY MATERIALS (Aircraft-Grade Aluminium Alloys + High-Strength Steel)INDUSTRY-LEADING CORROSION PROTECTION (Special Coatings, Materials & Hardware)PREMIUM ACCESSORIES (Top-Quality, Innovative & 3rd Party Compatibility)AERODYNAMIC PERFORMANCE (Low Profile, Rounded Edges & Stealth Air Dam)VEHICLE SPECIFIC STYLING (Mounting Rails & Aero)EASILY MOUNT ACCESSORIES (Adjustable Planks, T-Nuts & Tie-Down Plates)EASY INSTALLATION (Difficulty = 3/10)SPECIFICATIONS100-150kg DYNAMIC LOAD RATING [Independently Certified] 300-460kg STATIC LOAD RATING [Independently Certified] TBA OVERALL HEIGHT (above roof line) 25mm PLANK THICKNESS 28.34mm PLATFORM THICKNESS (fully assembled) TBA FULL PLATFORM LENGTH (fully assembled) 1246mm FULL PLATFORM WIDTH (fully assembled) TBA INSTALLED WEIGHT --> BARE BONES TBA INSTALLED WEIGHT --> ROOF TOP TENT [100-300kg] TBA INSTALLED WEIGHT --> ROOF TOP TENT [150-460kg] TBA INSTALLED WEIGHT --> OVERLAND TBA INSTALLED WEIGHT --> SAFARI TBA INSTALLED WEIGHT --> APEX TBA PRODUCT WEIGHT --> ((BUILD YOU OWN)) INCLUDES
1 TBA 1 TBA 3 TBA 1 TBA 1 Installation Instructions [COMING SOON] 1 TBA 1 TBA 3 TBA 3 TBA 1 Installation Instructions [COMING SOON] 1 TBA 1 TBA 2 TBA 2 TBA 1 Installation Instructions [COMING SOON] 1 TBA 1 TBA 1 TBA 1 TBA 1 Installation Instructions [COMING SOON] 1 TBA 1 TBA 1 TBA 1 TBA 1 Installation Instructions [COMING SOON] 3 TBA 1 TBA 3 TBA 1 TBA 1 Installation Instructions [COMING SOON] EDITIONS* WARNING *
FOR MAXIMUM SAFETY DO NOT EXCEED MANUFACTURERS ROOF WEIGHT LIMITS. Our load ratings represent the maximum mechanical forces our roof rack system can withstand before failure. Our load ratings do not address vehicle safety during high-speed manoeuvres, or changes to vehicle dynamics caused by a higher centre of gravity.
* CAUTION *
For maximum safety, loads should be evenly distributed and properly secured to avoid shifting during transport. Before using your roof rack, it is important to familiarise yourself with the proper load securing techniques and be constantly safety oriented. Please note, all of our load ratings are based on an evenly distributed load. -
ONETBA
TWOTBA
THREETBA
FOURTBA
FIVETBA
SIXTBA
SEVENTBA
EIGHTTBA
NINETBA
TENTBA
ELEVENTBA
TWELVETBA
THIRTEENTBA
FOURTEENTBA
FIFTEENTBA
SIXTEENTBA
SEVENTEENTBA -
N280 ROOF RACK fits the following vehicles:2010 Toyota 4Runner2011 Toyota 4Runner2012 Toyota 4Runner2013 Toyota 4Runner2014 Toyota 4Runner2015 Toyota 4Runner2016 Toyota 4Runner2017 Toyota 4Runner2018 Toyota 4Runner2019 Toyota 4Runner2020 Toyota 4Runner2021 Toyota 4Runner2022 Toyota 4Runner2023 Toyota 4Runner2024 Toyota 4RunnerN280 ROOF RACK is compatible with the following products:This list is based on customer reports, Chief Products has not confirmed fitment of these products. This list will be updated regularly as customers report their experiences.INSTALLATION INSTRUCTIONS
P375 ROOF RACK
Out of Stock Pre-Order $399.99 USD
Chief Products P375 ROOF RACK provides the pinnacle of performance for roof rack systems on the P375 (Ford Ranger, 2011-2021). It delivers industry-leading load ratings (150kg dynamic & 460kg static) in an extremely light weight and low profile design.
-
Chief Products P375 ROOF RACK provides the pinnacle of performance for roof rack systems on the P375 (Ford Ranger, 2011-2021). It delivers industry-leading load ratings (150kg dynamic & 460kg static) in an extremely light weight and low profile design.
MORE COMING SOON...
FEATURESMODULAR DESIGN (Mix-And-Match Components)GROUNDBREAKING CONFIGURABILITY (Easily Move & Change Components)HIGH-STRENGTH (Industry-Leading Load Ratings)TOP-QUALITY MATERIALS (Aircraft-Grade Aluminium Alloys + High-Strength Steel)INDUSTRY-LEADING CORROSION PROTECTION (Special Coatings, Materials & Hardware)PREMIUM ACCESSORIES (Top-Quality, Innovative & 3rd Party Compatibility)AERODYNAMIC PERFORMANCE (Low Profile, Rounded Edges & Stealth Air Dam)VEHICLE SPECIFIC STYLING (Mounting Rails & Aero)EASILY MOUNT ACCESSORIES (Adjustable Planks, T-Nuts & Tie-Down Plates)EASY INSTALLATION (Difficulty = 3/10)SPECIFICATIONS100-150kg DYNAMIC LOAD RATING [Independently Certified] 300-460kg STATIC LOAD RATING [Independently Certified] TBA OVERALL HEIGHT (above roof line) 25mm PLANK THICKNESS 28.34mm PLATFORM THICKNESS (fully assembled) TBA FULL PLATFORM LENGTH (fully assembled) 1246mm FULL PLATFORM WIDTH (fully assembled) TBA INSTALLED WEIGHT --> BARE BONES TBA INSTALLED WEIGHT --> ROOF TOP TENT [100-300kg] TBA INSTALLED WEIGHT --> ROOF TOP TENT [150-460kg] TBA INSTALLED WEIGHT --> OVERLAND TBA INSTALLED WEIGHT --> SAFARI TBA INSTALLED WEIGHT --> APEX TBA PRODUCT WEIGHT --> ((BUILD YOU OWN)) INCLUDES
1 TBA 1 TBA 3 TBA 1 TBA 1 Installation Instructions [COMING SOON] 1 TBA 1 TBA 3 TBA 3 TBA 1 Installation Instructions [COMING SOON] 1 TBA 1 TBA 2 TBA 2 TBA 1 Installation Instructions [COMING SOON] 1 TBA 1 TBA 1 TBA 1 TBA 1 Installation Instructions [COMING SOON] 1 TBA 1 TBA 1 TBA 1 TBA 1 Installation Instructions [COMING SOON] 3 TBA 1 TBA 3 TBA 1 TBA 1 Installation Instructions [COMING SOON] EDITIONS* WARNING *
FOR MAXIMUM SAFETY DO NOT EXCEED MANUFACTURERS ROOF WEIGHT LIMITS. Our load ratings represent the maximum mechanical forces our roof rack system can withstand before failure. Our load ratings do not address vehicle safety during high-speed manoeuvres, or changes to vehicle dynamics caused by a higher centre of gravity.
* CAUTION *
For maximum safety, loads should be evenly distributed and properly secured to avoid shifting during transport. Before using your roof rack, it is important to familiarise yourself with the proper load securing techniques and be constantly safety oriented. Please note, all of our load ratings are based on an evenly distributed load. -
ONETBA
TWOTBA
THREETBA
FOURTBA
FIVETBA
SIXTBA
SEVENTBA
EIGHTTBA
NINETBA
TENTBA
ELEVENTBA
TWELVETBA
THIRTEENTBA
FOURTEENTBA
FIFTEENTBA
SIXTEENTBA
SEVENTEENTBA -
P375 ROOF RACK fits the following vehicles:2011 Ford Ranger2012 Ford Ranger2013 Ford Ranger2014 Ford Ranger2015 Ford Ranger2016 Ford Ranger2017 Ford Ranger2018 Ford Ranger2019 Ford Ranger2020 Ford Ranger2021 Ford RangerP375 ROOF RACK is compatible with the following products:This list is based on customer reports, Chief Products has not confirmed fitment of these products. This list will be updated regularly as customers report their experiences.INSTALLATION INSTRUCTIONS
P703 ROOF RACK
Out of Stock Pre-Order $399.99 USD
Chief Products P703 ROOF RACK provides the pinnacle of performance for roof rack systems on the P703 (Ford Ranger, 2022-Current). It delivers industry-leading load ratings (150kg dynamic & 460kg static) in an extremely light weight and low profile design.
-
Chief Products P703 ROOF RACK provides the pinnacle of performance for roof rack systems on the P703 (Ford Ranger, 2022-Current). It delivers industry-leading load ratings (150kg dynamic & 460kg static) in an extremely light weight and low profile design.
MORE COMING SOON...
FEATURESMODULAR DESIGN (Mix-And-Match Components)GROUNDBREAKING CONFIGURABILITY (Easily Move & Change Components)HIGH-STRENGTH (Industry-Leading Load Ratings)TOP-QUALITY MATERIALS (Aircraft-Grade Aluminium Alloys + High-Strength Steel)INDUSTRY-LEADING CORROSION PROTECTION (Special Coatings, Materials & Hardware)PREMIUM ACCESSORIES (Top-Quality, Innovative & 3rd Party Compatibility)AERODYNAMIC PERFORMANCE (Low Profile, Rounded Edges & Stealth Air Dam)VEHICLE SPECIFIC STYLING (Mounting Rails & Aero)EASILY MOUNT ACCESSORIES (Adjustable Planks, T-Nuts & Tie-Down Plates)EASY INSTALLATION (Difficulty = 3/10)SPECIFICATIONS100-150kg DYNAMIC LOAD RATING [Independently Certified] 300-460kg STATIC LOAD RATING [Independently Certified] TBA OVERALL HEIGHT (above roof line) 25mm PLANK THICKNESS 28.34mm PLATFORM THICKNESS (fully assembled) TBA FULL PLATFORM LENGTH (fully assembled) 1246mm FULL PLATFORM WIDTH (fully assembled) TBA INSTALLED WEIGHT --> BARE BONES TBA INSTALLED WEIGHT --> ROOF TOP TENT [100-300kg] TBA INSTALLED WEIGHT --> ROOF TOP TENT [150-460kg] TBA INSTALLED WEIGHT --> OVERLAND TBA INSTALLED WEIGHT --> SAFARI TBA INSTALLED WEIGHT --> APEX TBA PRODUCT WEIGHT --> ((BUILD YOU OWN)) INCLUDES
1 TBA 1 TBA 3 TBA 1 TBA 1 Installation Instructions [COMING SOON] 1 TBA 1 TBA 3 TBA 3 TBA 1 Installation Instructions [COMING SOON] 1 TBA 1 TBA 2 TBA 2 TBA 1 Installation Instructions [COMING SOON] 1 TBA 1 TBA 1 TBA 1 TBA 1 Installation Instructions [COMING SOON] 1 TBA 1 TBA 1 TBA 1 TBA 1 Installation Instructions [COMING SOON] 3 TBA 1 TBA 3 TBA 1 TBA 1 Installation Instructions [COMING SOON] EDITIONS* WARNING *
FOR MAXIMUM SAFETY DO NOT EXCEED MANUFACTURERS ROOF WEIGHT LIMITS. Our load ratings represent the maximum mechanical forces our roof rack system can withstand before failure. Our load ratings do not address vehicle safety during high-speed manoeuvres, or changes to vehicle dynamics caused by a higher centre of gravity.
* CAUTION *
For maximum safety, loads should be evenly distributed and properly secured to avoid shifting during transport. Before using your roof rack, it is important to familiarise yourself with the proper load securing techniques and be constantly safety oriented. Please note, all of our load ratings are based on an evenly distributed load. -
ONETBA
TWOTBA
THREETBA
FOURTBA
FIVETBA
SIXTBA
SEVENTBA
EIGHTTBA
NINETBA
TENTBA
ELEVENTBA
TWELVETBA
THIRTEENTBA
FOURTEENTBA
FIFTEENTBA
SIXTEENTBA
SEVENTEENTBA -
P703 ROOF RACK fits the following vehicles:2022 Ford Ranger2013 Ford Ranger2014 Ford RangerP703 ROOF RACK is compatible with the following products:This list is based on customer reports, Chief Products has not confirmed fitment of these products. This list will be updated regularly as customers report their experiences.INSTALLATION INSTRUCTIONS
ROOF RACK (2x Half-Planks) [1146mm]
Pre-Order $135.99 USD
Chief Products ROOF RACK (Half-Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add/remove/reposition components) whenever their needs change. Best of all, each Half-Plank provides a channel for captive T-Nuts. This feature allows you to easily bolt accessories to the Half-Plank at any point along the entire length.
Chief Products ROOF RACK (Half-Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add/remove/reposition components) whenever their needs change. Best of all, each Half-Plank provides a channel for captive T-Nuts. This feature allows you to easily bolt accessories to the Half-Plank at any point along the entire length.
We provide (2) Half-Planks; each measuring 1146mm (45.12") long, 77mm (3.03") wide and an amazing 25mm (0.98") thin. We utilise a proprietary Aircraft-Grade Aluminium Alloy and an advanced Extrusion Manufacturing Process that allows us to deliver Half-Planks with an extremely high strength-to-weight ratio.
1146mm | HALF-PLANK LENGTH (45.12 inches) |
77mm | HALF-PLANK WIDTH (6.14 inches) |
25mm | HALF-PLANK THICKNESS (0.98 inches) |
1.51kg | INSTALLED WEIGHT --> 1 Half-Plank |
ROOF RACK (2x Tie-Down Plates)
Pre-Order $69.99 USD $76.99 USD
Chief Products ROOF RACK (Tie-Down Plates) are engineered to provide multiple ways to secure gear and accessories to your roof rack. They clamp securely between our Planks in a way that allows them to easily locate anywhere along the entire length of the Planks.
Manufactured from Aircraft-Grade Aluminium Alloys and High-Strength Steel, they're extremely strong to meet the high demands they're sure to encounter. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to easily secure any accessories you need. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your roof rack.
Chief Products ROOF RACK (Tie-Down Plates) are engineered to provide multiple ways to secure gear and accessories to your roof rack. They clamp securely between our Planks in a way that allows them to easily locate anywhere along the entire length of the Planks.
Manufactured from Aircraft-Grade Aluminium Alloys and High-Strength Steel, they're extremely strong to meet the high demands they're sure to encounter. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to easily secure any accessories you need. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your roof rack.
115mm | TIE-DOWN PLATE LENGTH (4.53 inches) |
110mm | TIE-DOWN PLATE WIDTH (4.33 inches) |
0.50kg | INSTALLED WEIGHT |
TIE-DOWN STRAP HOOK on CENTRE SECTION |
ROPE pass through CENTRE SECTION |
(2) T-NUT SLOTS --> M8 BOLT into M8 T-NUT (upper location between plates; includes room for bolt pass through) |
(2) T-NUT SLOTS --> M10 BOLT into M10 T-NUT (upper location between plates; includes room for bolt pass through) |
(2) T-NUT SLOTS --> M8 BOLT into M8 T-NUT (HEAVY DUTY --> lower location below both plates; includes room for bolt pass through) |
(2) T-NUT SLOTS --> M10 BOLT into M10 T-NUT (HEAVY DUTY --> lower location below both plates; includes room for bolt pass through) |
(2) T-NUT SLOTS --> M12 CARRIAGE BOLT into SQUARE HOLE (Lower Plate) (HEAVY DUTY --> up through lower plate) |
(2) T-NUT SLOTS --> M8, M10 & M12 BOLT pass through both PLATES (nut below lower plate) |
(2) M8 MOUNTING BOLTS --> REPLACE with LONGER MOUNTING BOLT (using weld nut on lower plate) |
ROOF RACK (4x Half-Plank End-Caps)
Pre-Order $25.99 USD
Chief Products ROOF RACK (Half-Plank End-Caps) provide a nice finish to the ends of our Half-Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Half-Planks. Perfect for customers not installing a WK2 ROOF RACK (Platform Frame). We provide (4) Half-Plank End-Caps; enough for (2) Half-Planks. They bolt on easily and feature (7) slots.
Chief Products ROOF RACK (Half-Plank End-Caps) provide a nice finish to the ends of our Half-Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Half-Planks. Perfect for customers not installing a WK2 ROOF RACK (Platform Frame). We provide (4) Half-Plank End-Caps; enough for (2) Half-Planks. They bolt on easily and feature (7) slots.
WK2 LOWER FRONT GUARD
Pre-Order $469.99 USD
Chief Products WK2 LOWER FRONT GUARD is engineered to protect the critical components at the lower front of your WK2 without ruining your Jeep's good looks. Weighing only 15kg (approx.) when fully installed, it provides off-road protection for the Lower Radiator Core, ACC Camera, Windshield Washer Bottle and Air Suspension Controller. It features a centre section made from 5mm high-strength steel for unparalleled strength, while still providing critical airflow to the lower radiator core. Bolted directly to the sub-frame it provides the very best approach angle possible, and our Bolt Head Protectors protect the front mounting bolts from off-road damage. Best of all, we've designed the WK2 LOWER FRONT GUARD so it installs behind the removable lower front fascia, providing full protection off-road while still allowing you to maintain a factory appearance on-road.
-
Chief Products WK2 LOWER FRONT GUARD is engineered to protect the critical components at the lower front of your WK2 without ruining your Jeep's good looks. Weighing only 15kg (approx.) when fully installed, it provides off-road protection for the Lower Radiator Core, ACC Camera, Windshield Washer Bottle and Air Suspension Controller. It features a centre section made from 5mm high-strength steel for unparalleled strength, while still providing critical airflow to the lower radiator core. Bolted directly to the sub-frame it provides the very best approach angle possible, and our Bolt Head Protectors protect the front mounting bolts from off-road damage. Best of all, we've designed the WK2 LOWER FRONT GUARD so it installs behind the removable lower front fascia, providing full protection off-road while still allowing you to maintain a factory appearance on-road.
We've created a modular system of protection products for the WK2, this means our WK2 LOWER FRONT GUARD will integrate perfectly with all of our other products --> WK2 HIDDEN WINCH MOUNT, WK2 SUMP PROTECTION PLATE, WK2 NUDGE BAR, WK2 RECOVERY HOOK and WK2 RECOVERY POINT.
FEATURESHIGH-STRENGTH STEEL (High Strength to Weight Ratio)DURABLE POWDER COAT FINISH (Textured Black)E-COAT (Industry Leading Corrosion Protection)AIRFLOW SLOTSDRAINAGE SLOTSEASY INSTALLATION (Difficulty = 4/10)SPECIFICATIONS14.90kg INSTALLED WEIGHT --> (BASE) + STANDARD GUARD 15.20kg INSTALLED WEIGHT --> (BASE) + ACC GUARD +4.2° APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with STANDARD GUARD) +2.2° APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with ACC GUARD) +10.6° APPROACH ANGLE (Summit & SRT with STANDARD GUARD) +8.6° APPROACH ANGLE (Summit & SRT with ACC GUARD) * Approach Angle calculations represent improvement over stock (based on stock tyres, lower front fascia removed and air suspension in STD height). Raising the air suspension or installing larger tyres will increase the approach angle improvements.INCLUDES1 Guard KIT (Standard)
1 Centre Section (5mm High-Strength Steel) 2 Chassis Mounting Brackets 2 Corner Mounting Brackets 2 Corner Guards 1 Air Dam Reinforcement Bracket 4 M6 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 2 M8 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 4 M10 x 25mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 100mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 30mm High Tensile (8.8) Bolts (Zinc Plated) 14 M8 x 25mm High Tensile (8.8) Bolts (Black Zinc Plated) 4 M6 x 40mm High Tensile (10.9) Bolts (Zinc Plated) 4 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 18 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 4 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 x 8mm Bushings (6061 Aluminium) 12 M6 x 25mm Washers (Zinc Plated) 4 M6 Nutserts (Stainless Steel) 1 4g pouch Anti-Seize 1 Installation Instructions
1 Guard KIT (ACC) 1 Centre Section (5mm High-Strength Steel) 2 Chassis Mounting Brackets 2 Corner Mounting Brackets 2 Corner Guards 1 Air Dam Reinforcement Bracket 4 M6 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 2 M8 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 4 M10 x 25mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 100mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 30mm High Tensile (8.8) Bolts (Zinc Plated) 14 M8 x 25mm High Tensile (8.8) Bolts (Black Zinc Plated) 4 M6 x 40mm High Tensile (10.9) Bolts (Zinc Plated) 4 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 18 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 4 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 x 8mm Bushings (6061 Aluminium) 12 M6 x 25mm Washers (Zinc Plated) 4 M6 Nutserts (Stainless Steel) 1 4g pouch Anti-Seize 1 Installation Instructions OPTIONS -
OFF-ROAD PROTECTIONCritical off-road protection for the Lower Radiator Core, ACC Camera, Windshield Washer Bottle and Air Suspension Controller. Accomplished via numerous sub-frame braces and high-strength steel that is 5mm thick on the main centre section.MAINTAIN OEM APPEARANCEThe lower front fascia can be easily installed over the WK2 LOWER FRONT GUARD, maintaining the great looks of the Jeep Grand Cherokee while driving around town. Then when you're heading off-road, you can easily remove the lower front fascia via (5) 1/4 turn fasteners to reveal the WK2 LOWER FRONT GUARD.LOW INSTALLED WEIGHTOnly 15kg (approx.) when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) - 90kgs (steel).BETTER COOLING PERFORMANCEOur design provides significant air flow to the lower radiator core. This is especially important if you're towing, operating in hot climates or have additional items (off-road lights, etc.) restricting airflow to the radiator core. Considering a large portion of airflow comes up from the road surface, we're often surprised how many competing lower protection products are missing this critical feature.MAXIMUM APPROACH ANGLESince our design doesn't extend past the front of your WK2, the maximum approach angle is retained.CCOMPATIBLE With EXCELLENT FRONT RECOVERY OPTIONSCan be installed with OEM Tow Hooks (if available for your WK2) or Chief Products WK2 Recovery Points & WK2 Recovery Hooks (engineer rated to 4,500kg).EASILY & INEXPENSIVELY REPAIREDBecause we designed the WK2 Lower Front Guard as a set of components, if you damage one part, you can easily and cost effectively replace just that part.LOW COSTSignificantly less expensive than a Bull Bar, especially when you include shipping and installation costs.EASY TO INSTALLWe provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can install this yourself.INDUSTRY LEADING CORROSION PROTECTIONWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.BOLT HEAD PROTECTIONOur Bolt Head Protectors are engineered to keep critical bolt heads protected from off-road obstacles. They feature a slotted design that keys directly into the product with no possibility of spinning or moving when hit off-road.REAL WORLD TESTINGThere aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.TOP QUALITY FINISHING TOUCHESWe include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
-
Bolts into existing mounting points in the frame, no drilling or cutting needed.Fitment confirmed on the following vehicles:2011 Jeep Grand Cherokee - All Models & Limited Editions2012 Jeep Grand Cherokee - All Models & Limited Editions2013 Jeep Grand Cherokee - All Models & Limited Editions2014 Jeep Grand Cherokee - All Models & Limited Editions2015 Jeep Grand Cherokee - All Models & Limited Editions2016 Jeep Grand Cherokee - All Models & Limited Editions2017 Jeep Grand Cherokee - All Models & Limited Editions2018 Jeep Grand Cherokee - All Models & Limited Editions2019 Jeep Grand Cherokee - All Models & Limited Editions2020 Jeep Grand Cherokee - All Models & Limited Editions2021 Jeep Grand Cherokee - All Models & Limited Editions* Fits USA & Export models.** Fitment on Summit & High Altitude (2013-2016) requires permanent removal of the lower front fascia.*** Fitment on Summit & High Altitude (2017-2021) and SRT (all model years) requires permanent removal of the lower front fascia and cutting of the plastic bumper.Fitment unconfirmed on the following vehicles:2018-2020 Jeep Grand Cherokee - TrackhawkFitment confirmed with the following products:Uneek WK2 Grand Cherokee Bash PlateRocky Road Bumper Kits & Winch Mounting Kits (2011 - 2018 WK2s)OEM Tow Hooks (part# 82212095)Product does NOT fit with the following products:Jeep Australia Tow Hook (part# CH8220WKRH or AUSWK14HOOK)Jeep Belly Pan (part# 68089029AC)INSTALLATION INSTRUCTIONS
-
WK2 NUDGE BAR
Pre-Order $239.99 USD $566.98 USD
Chief Products WK2 Nudge Bar provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel (excellent corrosion and scratch resistance) and features a specially engineered mounting system (built from 20mm high-strength steel) that provides maximum strength without reducing your approach angle. It includes a slotted accessory mounting tab that runs the entire length of the bar (making it extremely easy to mount your accessories). Best of all, we've created a bar that is compatible with the all of your Jeep's safety systems - air bags, adaptive cruise control, forward collision warning, lane departure warning and parking sensors*.
-
Chief Products WK2 Nudge Bar provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel (excellent corrosion and scratch resistance) and features a specially engineered mounting system (built from 20mm high-strength steel) that provides maximum strength without reducing your approach angle. It includes a slotted accessory mounting tab that runs the entire length of the bar (making it extremely easy to mount your accessories). Best of all, we've created a bar that is compatible with the all of your Jeep's safety systems - air bags, adaptive cruise control, forward collision warning, lane departure warning and parking sensors*.
FEATURES304 Stainless Steel (Excellent Corrosion & Scratch Resistance)Bar = Mirror Polished or Durable Powder Coat FinishMounting Arms = E-Coat + Durable Powder Coat FinishEasy Installation (Difficulty = 2/10)SPECIFICATIONS10.6kg Fully Installed Weight (Including Mounting Hardware) 63.5mm Bar Diameter 629mm Mounting Tab Total Length (24.76 inches) 599mm Mounting Tab Slot Length (23.58 inches) 123 Brinell Hardness (Excellent Scratch Resistance) 29.4˚ Approach Angle (lower front fascia removed + standard suspension) 33.3˚ Approach Angle (lower front fascia removed + air suspension OR2) Same As Stock Approach Angle (lower front fascia installed) INCLUDES1 Gloss Black Bar (304 Stainless Steel) 2 Chassis Mounting Arms 4 Chassis Mounting Plates 2 M10 x 60mm Heavy Duty Washers (Black EDP Coating) 4 M10 x 40mm High Tensile (10.9) Bolts (Black Zinc Plated) 4 M10 x 65mm High Tensile (10.9) Bolts (Black Zinc Plated) 8 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M10 Nuts (Zinc Plated) 1 4g pouch Anti-Seize 1 Installation Instructions 1 Mirror Polished Bar (304 Stainless Steel) 2 Chassis Mounting Arms 4 Chassis Mounting Plates 2 M10 x 60mm Heavy Duty Washers (Black EDP Coating) 4 M10 x 40mm High Tensile (10.9) Bolts (Black Zinc Plated) 4 M10 x 65mm High Tensile (10.9) Bolts (Black Zinc Plated) 8 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M10 Nuts (Zinc Plated) 1 4g pouch Anti-Seize 1 Installation Instructions 2 Chassis Mounting Arms 4 Chassis Mounting Plates 2 M10 x 60mm Heavy Duty Washers (Black EDP Coating) 4 M10 x 40mm High Tensile (10.9) Bolts (Black Zinc Plated) 4 M10 x 65mm High Tensile (10.9) Bolts (Black Zinc Plated) 8 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M10 Nuts (Zinc Plated) 1 4g pouch Anti-Seize 1 Installation Instructions OPTIONSMORE INFO*Parking Sensor Compatibility - We provide 95% compatibility (read more). -
Excellent Approach AngleSince our design doesn't extend below the mounting brackets, the approach angle (an important aspect off-road) is significantly better than other nudge bars.
Parking Sensor CompatibilityThrough careful engineering & testing we've delivered a nudge bar that is 95% compatible with the parking sensors on all WK2 models.
High StrengthOur innovative mounting system uses steel tabs on the bottom of each bar to lock the bar securely to (2) 20mm high-strength steel mounting arms. This high-strength design means there will be minimal vibrations for your accessories when you're off-road.
Highly Scratch ResistantBy using 304 Stainless Steel (which has a higher hardness rating than Aluminium) we're able to provide a nudge bar with much better scratch & wear resistance.
Low Installed WeightOnly 10.6kg when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) - 90kgs (steel).
Accommodates Numerous Lighting & Accessory OptionsThe accessory mounting tab is slotted across its entire length, allowing you to install lights or accessories however you choose.
Contoured To FitThe accessory mounting tab is contoured to match the curvature of the WK2 grille, so it integrates perfectly with the front of the WK2.
Compatible With Front Recovery PointsCan be installed with Chief Products WK2 Recovery Hooks & WK2 Recovery Points, (which can be installed on driver & passenger sides and are engineer rated to 4,500kg). Due to mounting restrictions, many nudge bars don't allow you to install any front recovery points with their bar.
Compatible With Adaptive Cruise ControlThrough careful engineering & testing we've delivered a nudge bar that is compatible with the adaptive cruise control system on all WK2 models.
Guards Against Damage During RecoveryThe mounting brackets are designed to stop recovery straps or bow shackles from hitting the bar during an off-road recovery.
Easy To InstallWe provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can easily install this yourself. We've even designed the mounting brackets so they swivel slightly during installation to make things as easy as possible.
Industry Leading Corrosion ProtectionWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.
Mirror Polish That LastsOur mirror polished 304 Stainless Steel keeps looking good for longer. Polished aluminium bars tend to develop a white haze from oxidation that causes them to lose their lustre.
Top Quality Finishing TouchesWe include all the details that matter. Electrophoretic Coating on all mounting plates. High tensile bolts for maximum strength. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great. -
Bolts into existing mounting points in the frame, no drilling or cutting needed. Some models require cutting holes for the Mounting Brackets, (see notes below).WK2 Nudge Bar fits the following vehicles:2011 Jeep Grand Cherokee - All Models & Limited Editions2012 Jeep Grand Cherokee - All Models & Limited Editions2013 Jeep Grand Cherokee - All Models & Limited Editions2014 Jeep Grand Cherokee - All Models & Limited Editions2015 Jeep Grand Cherokee - All Models & Limited Editions2016 Jeep Grand Cherokee - All Models & Limited Editions2017 Jeep Grand Cherokee - All Models & Limited Editions2018 Jeep Grand Cherokee - All Models & Limited Editions2019 Jeep Grand Cherokee - All Models & Limited Editions2020 Jeep Grand Cherokee - All Models & Limited Editions2021 Jeep Grand Cherokee - All Models & Limited Editions
* Fits USA & Export models.** Fitment on most 2016+ Australian & European models requires cutting (2) holes in the grille area of the lower front fascia for the Mounting Brackets to pass through. Instructions are not currently provided for this modification.*** Fitment on Summit, High Altitude, SRT & Trackhawk (including all models with same lower front fascia) requires cutting (2) holes in the grille area of the lower front fascia for the Mounting Brackets. Instructions are not currently provided for this modification.Fitment confirmed with the following products:Does NOT fit with the following products:OEM Tow Hooks (part# 82212095)Jeep Australia Tow Hook (part# CH8220WKRH or AUSWK14HOOK)INSTALLATION INSTRUCTIONS
WK2 NUDGE BAR (BASE)
Pre-Order $209.99 USD $287.99 USD
Chief Products WK2 NUDGE BAR (BASE) provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel and it includes a slotted accessory mounting tab that runs the entire length of the bar, making it extremely easy to mount your accessories. We provide (2) versions, so you can choose the one that best fits the style of your WK2.
Chief Products WK2 NUDGE BAR (BASE) provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel and it includes a slotted accessory mounting tab that runs the entire length of the bar, making it extremely easy to mount your accessories. We provide (2) versions, so you can choose the one that best fits the style of your WK2.
63.5mm | BAR DIAMETER |
629mm | MOUNTING TAB TOTAL LENGTH (24.76 inches) |
599mm | MOUNTING TAB SLOT LENGTH (23.58 inches) |
123 | BRINELL HARDNESS (Excellent Scratch Resistance) |
1 | Bar Assembly (304 Stainless Steel) |
1 | Installation Instructions |
WL75 ROOF RACK
Out of Stock Pre-Order $559.99 USD
Chief Products WL75 ROOF RACK provides the pinnacle of performance for roof rack systems on the WL75 (Jeep Grand Cherokee, 2021-Current). It delivers industry-leading load ratings (150kg dynamic & 460kg static) in an extremely light weight and low profile design.
-
Chief Products WL75 ROOF RACK provides the pinnacle of performance for roof rack systems on the WL75 (Jeep Grand Cherokee, 2021-Current). It delivers industry-leading load ratings (150kg dynamic & 460kg static) in an extremely light weight and low profile design.
MORE COMING SOON...
FEATURESMODULAR DESIGN (Mix-And-Match Components)GROUNDBREAKING CONFIGURABILITY (Easily Move & Change Components)HIGH-STRENGTH (Industry-Leading Load Ratings)TOP-QUALITY MATERIALS (Aircraft-Grade Aluminium Alloys + High-Strength Steel)INDUSTRY-LEADING CORROSION PROTECTION (Special Coatings, Materials & Hardware)PREMIUM ACCESSORIES (Top-Quality, Innovative & 3rd Party Compatibility)AERODYNAMIC PERFORMANCE (Low Profile, Rounded Edges & Stealth Air Dam)VEHICLE SPECIFIC STYLING (Mounting Rails & Aero)EASILY MOUNT ACCESSORIES (Adjustable Planks, T-Nuts & Tie-Down Plates)EASY INSTALLATION (Difficulty = 3/10)SPECIFICATIONS100-150kg DYNAMIC LOAD RATING [Independently Certified] 300-460kg STATIC LOAD RATING [Independently Certified] TBA OVERALL HEIGHT (above roof line) 25mm PLANK THICKNESS 28.34mm PLATFORM THICKNESS (fully assembled) TBA FULL PLATFORM LENGTH (fully assembled) 1246mm FULL PLATFORM WIDTH (fully assembled) TBA INSTALLED WEIGHT --> BARE BONES TBA INSTALLED WEIGHT --> ROOF TOP TENT [100-300kg] TBA INSTALLED WEIGHT --> ROOF TOP TENT [150-460kg] TBA INSTALLED WEIGHT --> OVERLAND TBA INSTALLED WEIGHT --> SAFARI TBA INSTALLED WEIGHT --> APEX TBA PRODUCT WEIGHT --> ((BUILD YOU OWN)) INCLUDES
1 TBA 1 TBA 3 TBA 1 TBA 1 Installation Instructions [COMING SOON] 1 TBA 1 TBA 3 TBA 3 TBA 1 Installation Instructions [COMING SOON] 1 TBA 1 TBA 2 TBA 2 TBA 1 Installation Instructions [COMING SOON] 1 TBA 1 TBA 1 TBA 1 TBA 1 Installation Instructions [COMING SOON] 1 TBA 1 TBA 1 TBA 1 TBA 1 Installation Instructions [COMING SOON] 3 TBA 1 TBA 3 TBA 1 TBA 1 Installation Instructions [COMING SOON] EDITIONS* WARNING *
FOR MAXIMUM SAFETY DO NOT EXCEED MANUFACTURERS ROOF WEIGHT LIMITS. Our load ratings represent the maximum mechanical forces our roof rack system can withstand before failure. Our load ratings do not address vehicle safety during high-speed manoeuvres, or changes to vehicle dynamics caused by a higher centre of gravity.
* CAUTION *
For maximum safety, loads should be evenly distributed and properly secured to avoid shifting during transport. Before using your roof rack, it is important to familiarise yourself with the proper load securing techniques and be constantly safety oriented. Please note, all of our load ratings are based on an evenly distributed load. -
ONETBA
TWOTBA
THREETBA
FOURTBA
FIVETBA
SIXTBA
SEVENTBA
EIGHTTBA
NINETBA
TENTBA
ELEVENTBA
TWELVETBA
THIRTEENTBA
FOURTEENTBA
FIFTEENTBA
SIXTEENTBA
SEVENTEENTBA -
Bolts to the roof using the existing roof nutserts provided by Jeep, no drilling or cutting required. Removal of the OEM plastic roof rails is required.WL75 ROOF RACK fits the following vehicles:2021 Jeep Grand Cherokee - All Models & Limited Editions2022 Jeep Grand Cherokee - All Models & Limited Editions2023 Jeep Grand Cherokee - All Models & Limited Editions2024 Jeep Grand Cherokee - All Models & Limited EditionsWL75 ROOF RACK is compatible with the following products:This list is based on customer reports, Chief Products has not confirmed fitment of these products. This list will be updated regularly as customers report their experiences.INSTALLATION INSTRUCTIONS