WK2 REAR BUMPER GUARD (Corners)

by: Chief Products

4.7
Rated 4.7 out of 5 stars
3 Reviews

NOW SHIPPING

Chief Products WK2 REAR BUMPER GUARD (Corners) is engineered to bolt-on to the WK2 REAR BUMPER GUARD (Centre) and extend protection to the vulnerable rear corners of your WK2. The clean simple design hugs the lines of the rear bumper to provide maximum protection for the rear of your WK2 without ruining your Jeep’s good looks.

  • Chief Products WK2 REAR BUMPER GUARD (Corners) is engineered to bolt-on to the WK2 REAR BUMPER GUARD (Centre) and extend protection to the vulnerable rear corners of your WK2. The clean simple design hugs the lines of the rear bumper to provide maximum protection for the rear of your WK2 without ruining your Jeep’s good looks.

    To ensure the WK2 REAR BUMPER GUARD (Corners) is a top-notch product you can trust, we performed (12) months of real-world testing. Our real-world testing included 1000s of kilometers of on-road and off-road testing, including many extremely difficult off-road challenges. Those epxeriences and passionate attention-to-detail led to numerous refinements that increased ease-of-installation, lowered weight, maximised performance and increased strength.

    FEATURES
    HIGH-STRENGTH STEEL (High Strength to Weight Ratio)
    DURABLE POWDER COAT FINISH (Textured Black)
    E-COAT (Industry Leading Corrosion Protection)
    RECESSED MOUNTING BOLTS (Smooth Undercarriage)
    EASY INSTALLATION (Difficulty = 5/10)
    SPECIFICATIONS
    10.75kg INSTALLED WEIGHT
    23.9° DEPARTURE ANGLE (Standard Suspension)
    25.9° DEPARTURE ANGLE (Air Suspension OR2)
    INCLUDES
    2 Corner Guards
    2 Main Mounting Brackets
    2 Corner Mounting Brackets
    2 Exhaust Support Brackets
    4 M10 x 25mm High Tensile (10.9) Bolts (Zinc Plated)
    12 M8 x 25mm High Tensile (10.9) Bolts (Zinc Plated)
    4 M8 x 16mm High Tensile (10.9) Bolts (Zinc Plated)
    4 M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
    16 M8 Wedge-Lock Extended Washers (Zinc Flake Coating)
    1 4g pouch Anti-Seize
    1 Installation Instructions

    * REQURIED *

    WK2 REAR BUMPER GUARD (Corners) cannot be installed without WK2 REAR BUMPER GUARD (Centre). The (2) products integrate seamlessly to provide robust protection for the rear of your WK2.

    * ATTENTION *

    This product does not fit 3.0L diesel models with a DEF Tank (North American 3.0L Models).
  • High Strength Off-Road Protection
    Engineered and fully tested to provide off-road protection for the vulnerable rear corners of your WK2. Accomplished via high-strength steel braces and boxed sections to provide maximum strength.

    Contoured To Fit
    We designed the WK2 REAR BUMPER GUARD to hug the lines of the rear bumper, so it provides off-road protection while remaining unobtrusive.

    Perfect Integration
    Engineered to integrate seamlessly with the WK2 REAR BUMPER GUARD (Centre) and provide robust off-road protection for the rear of your WK2.

    Compatible With Rear Parking Sensors
    Unlike bulky off-road rear bumpers, the WK2 REAR BUMPER GUARD is fully compatible with the rear parking sensors and requires no alteration to the rear parking sensor system.

    Compatible With Jeep/Mopar Towbars
    Designed to integrate seamlessly with Jeep-Mopar Towbars (USA & Australian models).

    Recessed Mounting Bolts
    Engineered to deliver a smooth undercarriage and keep bolt heads protected off-road.

    Industry Leading Corrosion Protection
    We utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.

    Real World Testing
    There aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.

    Top Quality Finishing Touches
    We include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
  • Requires WK2 REAR BUMPER GUARD (Centre). Bolts into existing mounting points in the frame, no drilling or cutting of OEM parts needed.
    WK2 Rear Bumper Guard (Corner Protection Kit) fits the following vehicles:
    2011 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)
    2012 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)
    2013 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)
    2014 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)
    2015 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)
    2016 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)
    2017 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)
    2018 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)
    2019 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)
    2020 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)
    2021 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)
    Does NOT fit on the following vehicles:
    2012-2019 Jeep Grand Cherokee - 3.0L Diesel with DEF Tank (USA Models ONLY)
    2014-2019 Jeep Grand Cherokee - Summit & High Altitude (including all models with same lower rear bumper/fascia)
    2012-2019 Jeep Grand Cherokee - SRT (including all models with same lower rear bumper/fascia)
    Fitment confirmed with the following products:
    MagnaFlow Stainless MF Series Cat-Back Performance Exhaust
    INSTALLATION INSTRUCTIONS


4.7
Rated 4.7 out of 5 stars
Based on 3 reviews
Total 5 star reviews: 2 Total 4 star reviews: 1 Total 3 star reviews: 0 Total 2 star reviews: 0 Total 1 star reviews: 0
100%would recommend this product
3 reviews
  • S
    Storm
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    3 years ago
    Incredible Looks and Protection

    I was hesitant about how " sturdy" the corner protection kit would be and if it would hold up to the WK2's weight after dropping from a ledge. I can say after installing and testing this that these hold up to more abuse than I can ever through it. Not to mention they integrate into the design of the WK2 better than any solution out there. LOVE my corner guards and rear protection plates.

  • GW
    Glen W.
    Verified Buyer
    I recommend this product
    Rated 4 out of 5 stars
    3 years ago
    Solid Protection for Rear Corners

    The parts arrived well wrapped and in perfect condition - my typical experience with all orders. I went with Chief because their solution is minimal mods and the products seem very well engineered. The 4 vs 5 star is just based on the instructions. Chief gets my business because, while I'm not a automotive expert, the instructions give me the confidence to try to install and learn. First off - most experts probably know to test all the threads on welded nuts. I ran into 2 that were a little rough - I couldn't turn by hand. The thought of taking of the rear fascia was a little overwhelming however the instructions were very good. For reference I have a 2018 GC Trailhawk, few notes to help others. Step 3 - these are now 10mm nuts. Step 9 - if you print at correct resolution the bolt spacing on the template is correct, the outline is not (too big). You can adjust to get the bolts in position. The template would be better if the holes were show with a cross hair vs blacked out. Step 12 - there is an order of installation wrt to Bumper Guard and Corner unit - just be aware of the Note on this step. I'm not a Mechanical Engineer but at Step 13 I think you should consider dry fitting the Corner Guards, then marking to drill. Regardless you want to do a dry fit for the tightening of everything that will get covered by the re-install of the rear fascia. No torque settings provided, used other Chief install docs for values.

  • S
    Shawn
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    6 years ago
    Get the Add-On!

    All Chief products are top-of-the-line in quality, and the customer service is first rate! The Deluxe Add-On is worth the investment to protect the tailpipes. Highly recommended!

Reviews LoadedReviews Added

Related Items


CURRENCY NOTICE

All orders are charged in US Dollars.
Prices in other currencies are estimates only.

OK

Out of Stock

Apologies, one of the items required
for this product is out of stock.

OK
out of region choose vehicle account regions

CHOOSE YOUR SHOP

SHOP NOTICE

We’re unable to change your Shop while in the Accounts section. Please leave the Accounts section and try again.

OK
AE region

SHOP NOTICE

Our Middle-East Shop will launch soon. Please provide your details to stay informed.


This field is required.
This field is required.