The Store
We will remember your selection.
BOLT HEAD PROTECTORS (Slotted)
$12.99 USD
Chief Products Bolt Head Protectors (Slotted) are specifically designed to integrate with our product line. They provide a simple and effective way to protect exposed bolt heads underneath your WK2. The angled sides protect the bolt head from rocks and other off-road obstacles that would normally cause damage. The slotted design keys into the product and locks it into place when the bolt is tightened, eliminating any chance the bolt head protector can spin or move when hit off-road.
Chief Products Bolt Head Protectors (Slotted) are specifically designed to integrate with our product line. They provide a simple and effective way to protect exposed bolt heads underneath your WK2. The angled sides protect the bolt head from rocks and other off-road obstacles that would normally cause damage. The slotted design keys into the product and locks it into place when the bolt is tightened, eliminating any chance the bolt head protector can spin or move when hit off-road. Each one is manufactured out of 6061 Aluminium to protect against corrosion and the harsh life they're sure to encounter under your 4x4. Best of all, they install easily like a normal washer.
FEATURES
6061 ALUMINIUM (Excellent Corrosion Resistance)
EASY INSTALLATION (Difficulty = 1/10)
SIZES
M6 --> Fits M6 Bolts
M8 --> Fits M8 Bolts
BOLT HEAD PROTECTORS (Standard)
Out of Stock $10.99 USD
Chief Products Bolt Head Protectors (Standard) are a simple and effective way to protect exposed bolt heads underneath your 4x4. The angled sides protect the bolt head from rocks and other off-road obstacles that would normally cause damage. The extra width and thickness of the design makes them an extremely stout washer (that can distribute clamping force over a greater area).
Chief Products Bolt Head Protectors (Standard) are a simple and effective way to protect exposed bolt heads underneath your 4x4. The angled sides protect the bolt head from rocks and other off-road obstacles that would normally cause damage. The extra width and thickness of the design makes them an extremely stout washer (that can distribute clamping force over a greater area). Each one is manufactured out of 6061 Aluminium to protect against corrosion and the harsh life they're sure to encounter under your 4x4. Best of all, they install easily like a normal washer.
FEATURES
6061 ALUMINIUM (Excellent Corrosion Resistance)
EASY INSTALLATION (Difficulty = 1/10)
SIZES
M6 (38mm) --> Fits M6 Bolts (38mm outside diameter)
M8 (38mm) --> Fits M8 Bolts (38mm outside diameter)
HAWSE WINCH FAIRLEAD
$68.99 USD
Chief Products Hawse Winch Fairlead delivers slim lines, large smooth radiuses (perfect for synthetic ropes) and a mirror polish finish. For maximum strength each fairlead is CNC machined from a solid billet of 6061 T6 Aluminium. We then perform high-speed machine polishing to ensure every surface is smooth and radiant. As a final process to protect the finish and deliver maximum protection from the elements, each fairlead receives 20µm of Type II Anodising. To truly appreciate the quality workmanship, you need to hold one in your hand. Best of all, we provide (2) colours so you can choose the style that looks best on your machine.
Chief Products Hawse Winch Fairlead delivers slim lines, large smooth radiuses (perfect for synthetic ropes) and a mirror polish finish. For maximum strength each fairlead is CNC machined from a solid billet of 6061 T6 Aluminium. We then perform high-speed machine polishing to ensure every surface is smooth and radiant. As a final process to protect the finish and deliver maximum protection from the elements, each fairlead receives 20µm of Type II Anodising. To truly appreciate the quality workmanship, you need to hold one in your hand. Best of all, we provide (2) colours so you can choose the style that looks best on your machine.
1.1kg | INSTALLED WEIGHT |
295.5mm | TOTAL WIDTH (11.63 inches) |
70mm | TOTAL HEIGHT (2.76 inches) |
29mm | TOTAL DEPTH (1.14 inches) |
1 | Hawse Winch Fairlead (6061 T6 Aluminium) |
2 | M12 x 30mm High Tensile (12.9) Socket Head Bolts (Zinc Plated) |
J200 ROOF RACK
Out of Stock $579.99 USD
Chief Products J200 Roof Rack provides the pinnacle of performance for roof rack systems on the J200 (Toyota LandCruiser 200, 2008-2021). It delivers industry-leading load ratings (150kg dynamic & 460kg static) and vehicle specific styling in a light-weight, low-profile design. Our Modular Roof Rack System provides an unrivalled amount of configurability. Customers can build the roof rack they want, and easily reconfigure it whenever their needs change. One configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). One roof rack; that can easily adapt to your needs.
-
Chief Products J200 Roof Rack provides the pinnacle of performance for roof rack systems on the J200 (Toyota LandCruiser 200, 2008-2021). It delivers industry-leading load ratings (150kg dynamic & 460kg static) and vehicle specific styling in a light-weight, low-profile design. Our Modular Roof Rack System provides an unrivalled amount of configurability. Customers can build the roof rack they want, and easily reconfigure it whenever their needs change. One configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). One roof rack; that can easily adapt to your needs.
We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to keep the overall installed weight low and accomplish a degree of fit-and-finish you have to see in person to truly appreciate. The smooth top surface, low profile design and hidden fasteners have enabled us to deliver an extremely aerodynamic roof rack. Amazingly, even after thousands of kilometres of off-road driving, you won't hear any creaking or rattling. Best of all, we made it extremely easy to mount accessories - whether you're using t-nuts that slide the entire length of the Planks; or our industry-leading Tie-Down Plates that easily slide and clamp between the Planks. If you're looking for a top-quality place to carry extra gear on your next adventure, there's no doubt we've got you covered.
FEATURESMODULAR DESIGN (Mix-And-Match Components)GROUNDBREAKING CONFIGURABILITY (Easily Move & Change Components)HIGH-STRENGTH (Industry-Leading Load Ratings)TOP-QUALITY MATERIALS (Aircraft-Grade Aluminium Alloys + High-Strength Steel)INDUSTRY-LEADING DURABILITY (High-Strength + Corrosion Protection + UV Stable Coatings)INDUSTRY-LEADING CORROSION PROTECTION (Special Coatings, Materials & Hardware)EASILY MOUNT ACCESSORIES (Adjustable Planks, T-Nuts & Tie-Down Plates)PREMIUM ACCESSORIES (Top-Quality, Innovative & 3rd Party Compatibility)VEHICLE SPECIFIC STYLING (Mounting Rails & Aero)STEALTH (Low Wind Noise + No Creaking/Rattling + Unobstructed Sunroof + Stealth Air Dam)TOP QUALITY FASTENERS (Blackened Stainless or High-Tensile + Wedge-Lock Washers)FIT & FINISH (Precision Manufacturing + Unrivalled QC Processes)EASY INSTALLATION (Difficulty = 2/10)SPECIFICATIONS100kg DYNAMIC LOAD RATING (with 2x Half-Planks) 300kg STATIC LOAD RATING (with 2x Half-Planks) 150kg DYNAMIC LOAD RATING (with 2+ Planks) 460kg STATIC LOAD RATING (with 2+ Planks) 86mm OVERALL HEIGHT (above roof line) 25mm PLANK THICKNESS 28.34mm PLATFORM THICKNESS (fully assembled) 2160mm FULL PLATFORM LENGTH (fully assembled) 1246mm FULL PLATFORM WIDTH (fully assembled) 14.4kg INSTALLED WEIGHT --> Bare Bones 14.4kg INSTALLED WEIGHT --> Roof Top Tent [100-300kg] 18.3kg INSTALLED WEIGHT --> Roof Top Tent [150-460kg] 22.2kg INSTALLED WEIGHT --> Overland 34.5kg INSTALLED WEIGHT --> Safari 42.7kg INSTALLED WEIGHT --> Apex 11.1kg INSTALLED WEIGHT --> ((Build Your Own)) INCLUDES
1 J200 ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 1 ROOF RACK (2x Half-Planks) [1146mm] 1 ROOF RACK (4x Half-Plank End-Caps) 1 Installation Instructions
1 J200 ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 1 ROOF RACK (2x Half-Planks) [1146mm] 1 ROOF RACK (4x Half-Plank End-Caps) 1 Installation Instructions
1 J200 ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 1 ROOF RACK (2x Planks) [1146mm] 1 ROOF RACK (4x Plank End-Caps) 1 ROOF RACK (Roof Top Tent KIT) 1 Installation Instructions
1 J200 ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 4 ROOF RACK (2x Planks) [1146mm] 4 ROOF RACK (4x Plank End-Caps) 1 ROOF RACK (2x Half-Planks) [1146mm] 1 ROOF RACK (4x Half-Plank End-Caps) 1 Installation Instructions
1 J200 ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 4 ROOF RACK (2x Planks) [1146mm] 1 ROOF RACK (2x Half-Planks) [1146mm] 1 ROOF RACK (Platform Frame) [8.5 Plank] 1 Installation Instructions
1 J200 ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 1 Installation Instructions EDITIONS* WARNING *
FOR MAXIMUM SAFETY DO NOT EXCEED MANUFACTURERS ROOF WEIGHT LIMITS. Our load ratings represent the maximum mechanical forces our roof rack system can withstand before failure. Our load ratings do not address vehicle safety during high-speed manoeuvres, or changes to vehicle dynamics caused by a higher centre of gravity.
* CAUTION *
For maximum safety, loads should be evenly distributed and properly secured to avoid shifting during transport. Before using your roof rack, it is important to familiarise yourself with the proper load securing techniques and be constantly safety oriented. Please note, all of our load ratings are based on an evenly distributed load. -
UNPRECEDENTED CONFIGURABILITYChoose how many Planks you want. Position your Planks wherever you want. Move your Planks easily, whenever you want. Choose if you want a frame around the outside. Choose how many Tie-Down Plates you want, and where you want them located. Configure your rack however you want. Numerous options. Numerous configurations.
MODULAR DESIGNOur modular engineering approach allow us to deliver a roof rack system that can be easily adapted to any situation. It also means you can upgrade-downgrade your roof rack any time your needs require.
HIGH-STRENGTHAll versions deliver industry leading load ratings. These ratings were independently tested and the test results are certified to comply with Australian Standard (AS 1235-2000) as well as international standards (ISO / PAS 11154 : 2009:2006) and (DIN 75302/02: 1991). During independent testing, our roof rack system successfully withstood 330kg of upward force, 600kg of forward force (including a special 20° off-axis test). To achieve our certification we needed to have less than 10mm of movement in our structure at the tested loads, we had 0.17mm!
One of the keys to our industry leading load ratings is our Mounting Rails. Not only do they transfer forces to the strongest points on the vehicle roof, they also utilise a boxed design that resists deformation at any singular point. This unique design element creates a 'mounting system’ that is much stronger than any of our competitors.
LOW WEIGHTWe utilise the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a roof rack system with an extremely high strength-to-weight ratio. This means our roof rack has an extremely low weight, while still being the very strongest on the market.
STEALTHChief Products roof racks are engineered to be extremely aerodynamic (smooth top surface, low profile design and hidden fasteners). These unique aerodynamic features make our roof racks extremely quiet for the majority of our customers. However, the more wind you have the more wind noise will increase. For customers that live in high-wind areas or regularly drive at high-speeds (120kmh+) we've developed a Stealth Air Dam (included with every set of Mounting Rails) that significantly reduces the noise caused by high-velocity air flows. Best of all, this wind noise performance improvement is accomplished utilising a product that mounts out-of-sight (ensuring it doesn't inhibit use of your rack, or obscure views out of your sunroof).
Our roof racks deliver an experience with no creaking, no rattling, and very low wind noise. We accomplish these amazing feats through a series of technologically advanced aerodynamic methods, along with some proven old school tech (rubber isolators).
LOW PROFILEOur roof racks are engineered to sit incredibly low at only 86mm above the roofline. We looked at mounting even closer to the vehicle, but during our real-world testing we found it was helpful to have a slight gap between the roof and the rack, so you can slip a hand underneath the rack to wash your roof.
UNOBSTRUCTED VIEWSIf your vehicle has a Sunroof, our roof rack won’t block your view (position your Planks wherever you want) so you can see and experience the beauty of the nature around you.
STYLEWe poured over every design detail to ensure the J200 Roof Rack would look great from every angle. Function was our primary aim, but we also studied every line and every proportion, paying close attention to how they integrate with the lines of the J200.
FIT & FINISHWe utilise advanced manufacturing techniques to achieve a degree of fit-and-finish you have to see in-person to truly appreciate.
SMOOTH TOP SURFACEThe top of our platform is completely smooth. No bolt heads sticking up, tie-down plates that sit completely flush and fasteners that are hidden from view.
EASILY MOUNT ACCESSORIESWe make it extremely easy to mount your accessories and bring your gear with you. We provide (2) full-length channels in each plank, enabling you to use T-Nuts that slide the entire length of the Planks. Even better, is our industry leading Tie-Down Plates and Anchor Points. They provide numerous mounting options and easily slide and clamp between the Planks.
TIE-DOWN PLATESOne of the primary usability goals for our roof racks, was that you could easily bolt/fasten/tie-down to the rack at almost any location. Our custom engineered Tie-Down Plates deliver on that goal. They clamp securely between the Planks in a way that allows them to easily move and fasten anywhere along the entire length of the Planks. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to fasten/bolt just about any accessory you can find. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your platform.
NEARLY UNLIMITED ACCESSORY MOUNTING LOCATIONSWe provide heaps of mounting locations so you can easily mount accessories anywhere. To achieve that goal, we've engineered Planks you can move wherever you need them. Then we've provided two full-length channels in each Plank for captive T-Nuts, allowing you to bolt/fasten to the Plank at any point along the entire length of the Plank. Finally, for maximum flexibility we've delivered Tie-Down Plates that can easily move and fasten anywhere along the entire length of the Planks.
COMPATIBLE WITH MOST ACCESSORIESIf the accessory uses M6, M8 or M10 bolts for mounting, it will probably work with our roof rack system. If not, one of our upcoming adapter kits should take care of business.
INNOVATIVE SUITE OF ACCESSORIESChief Products engineering team has already started work on several innovative accessories to further expand the functionality of our roof rack system. Taking advantage of our ground-up approach and modular design is allowing us to develop roof rack accessories that no one has ever seen before.
INDUSTRY LEADING CORROSION PROTECTIONWe utilise aircraft-grade aluminium alloys (highly corrosion resistant) for all of the major components of our roof rack system (with a layer of UV stable highly durable powder coat to provide additional protection). For all of our steel parts we utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts, then we add a layer of UV stable powder coat on top for additional protection. All of the included fasteners are protected as well - black zinc plating, zinc flake coatings, black oxide coatings or sometimes we just choose to use stainless steel fasteners. Our aim is to keep your roof rack looking great for many years to come.
EASY TO INSTALLEasy bolt-on installation with no drilling. In addition, our bracketry is fully adjustable so it adapts to your roof.
TOP QUALITY FINISHING TOUCHESWe include all the details that matter. High tensile bolts for maximum strength. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening (critical to combat loosening from off-roading vibrations). Anti-Seize for bolted joints that are resistant to seizing (important for a product that sits on your roof fully exposed to the elements). A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
We even include a few details you might not appreciate right away. For instance, if you’re installing lights, we provide channels in our mounting rails to run your wiring, (we even provide small holes for your zip ties, so you can hold your wiring up out of sight). -
No drilling or cutting required. Bolts to the roof using the existing roof nutserts provided by Toyota.Fitment confirmed on the following vehicles:2008 Toyota LandCruiser 2002009 Toyota LandCruiser 2002010 Toyota LandCruiser 2002010 Toyota LandCruiser 2002011 Toyota LandCruiser 2002012 Toyota LandCruiser 2002013 Toyota LandCruiser 2002014 Toyota LandCruiser 2002015 Toyota LandCruiser 2002016 Toyota LandCruiser 2002017 Toyota LandCruiser 2002018 Toyota LandCruiser 2002019 Toyota LandCruiser 2002020 Toyota LandCruiser 2002021 Toyota LandCruiser 200Compatible with the following products:This list is based on customer reports, Chief Products has not confirmed fitment of these products. This list will be updated regularly as customers report their experiences.INSTALLATION INSTRUCTIONS
J200 ROOF RACK (Mounting Rails)
Out of Stock $579.99 USD
Chief Products J200 ROOF RACK (Mounting Rails) act as the framework for our Modular Roof Rack System. Our unique modular approach, enables customers to build the roof rack they want, and easily reconfigure it whenever their needs change. Customers can have one configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). Customers get one roof rack, that can easily adapt to their needs.
Chief Products J200 ROOF RACK (Mounting Rails) act as the framework for our Modular Roof Rack System. Our unique modular approach, enables customers to build the roof rack they want, and easily reconfigure it whenever their needs change. Customers can have one configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). Customers get one roof rack, that can easily adapt to their needs.
Engineering our Mounting Rails as a key roof rack component, provides another important advantage; industry-leading load ratings (150kg dynamic & 460kg static). Our unique engineering approach, utilises a boxed design that resists deformation at any singular point, which helps transfer forces to the strongest points on the vehicle roof. When our Mounting Rails are combined with our Planks and Half-Planks, we're able to deliver a Modular Roof Rack System that provides customers with an unrivalled combination of modularity and strength.
11.1kg | INSTALLED WEIGHT |
N280 ROOF RACK
$515.99 USD
Chief Products N280 Roof Rack provides the pinnacle of performance for roof rack systems on the N280 (Toyota 4Runner, 2010-2024). It delivers industry-leading load ratings (150kg dynamic & 460kg static) and vehicle specific styling in a light-weight, low-profile design. Our Modular Roof Rack System provides an unrivalled amount of configurability. Customers can build the roof rack they want, and easily reconfigure it whenever their needs change. One configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). One roof rack; that can easily adapt to your needs.
-
Chief Products N280 Roof Rack provides the pinnacle of performance for roof rack systems on the N280 (Toyota 4Runner, 2010-2024). It delivers industry-leading load ratings (150kg dynamic & 460kg static) and vehicle specific styling in a light-weight, low-profile design. Our Modular Roof Rack System provides an unrivalled amount of configurability. Customers can build the roof rack they want, and easily reconfigure it whenever their needs change. One configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). One roof rack; that can easily adapt to your needs.
We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to keep the overall installed weight low and accomplish a degree of fit-and-finish you have to see in person to truly appreciate. The smooth top surface, low profile design and hidden fasteners have enabled us to deliver an extremely aerodynamic roof rack. Amazingly, even after thousands of kilometres of off-road driving, you won't hear any creaking or rattling. Best of all, we made it extremely easy to mount accessories - whether you're using t-nuts that slide the entire length of the Planks; or our industry-leading Tie-Down Plates that easily slide and clamp between the Planks. If you're looking for a top-quality place to carry extra gear on your next adventure, there's no doubt we've got you covered.
FEATURESMODULAR DESIGN (Mix-And-Match Components)GROUNDBREAKING CONFIGURABILITY (Easily Move & Change Components)HIGH-STRENGTH (Industry-Leading Load Ratings)TOP-QUALITY MATERIALS (Aircraft-Grade Aluminium Alloys + High-Strength Steel)INDUSTRY-LEADING DURABILITY (High-Strength + Corrosion Protection + UV Stable Coatings)INDUSTRY-LEADING CORROSION PROTECTION (Special Coatings, Materials & Hardware)EASILY MOUNT ACCESSORIES (Adjustable Planks, T-Nuts & Tie-Down Plates)PREMIUM ACCESSORIES (Top-Quality, Innovative & 3rd Party Compatibility)VEHICLE SPECIFIC STYLING (Mounting Rails & Aero)STEALTH (Low Wind Noise + No Creaking/Rattling + Unobstructed Sunroof + Stealth Air Dam)TOP QUALITY FASTENERS (Blackened Stainless or High-Tensile + Wedge-Lock Washers)FIT & FINISH (Precision Manufacturing + Unrivalled QC Processes)EASY INSTALLATION (Difficulty = 2/10)SPECIFICATIONS100kg DYNAMIC LOAD RATING (with 2x Half-Planks) 300kg STATIC LOAD RATING (with 2x Half-Planks) 150kg DYNAMIC LOAD RATING (with 2+ Planks) 460kg STATIC LOAD RATING (with 2+ Planks) 86mm OVERALL HEIGHT (above roof line) 25mm PLANK THICKNESS 28.34mm PLATFORM THICKNESS (fully assembled) 2160mm FULL PLATFORM LENGTH (fully assembled) 1246mm FULL PLATFORM WIDTH (fully assembled) 11.4kg INSTALLED WEIGHT --> Bare Bones 11.4kg INSTALLED WEIGHT --> Roof Top Tent [100-300kg] 15.3kg INSTALLED WEIGHT --> Roof Top Tent [150-460kg] 19.2kg INSTALLED WEIGHT --> Overland 31.5kg INSTALLED WEIGHT --> Safari 39.7kg INSTALLED WEIGHT --> Apex 8.1kg INSTALLED WEIGHT --> ((Build Your Own)) INCLUDES
1 N280 ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 1 ROOF RACK (2x Half-Planks) [1146mm] 1 ROOF RACK (4x Half-Plank End-Caps) 1 Installation Instructions
1 N280 ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 1 ROOF RACK (2x Half-Planks) [1146mm] 1 ROOF RACK (4x Half-Plank End-Caps) 1 Installation Instructions
1 N280 ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 1 ROOF RACK (2x Planks) [1146mm] 1 ROOF RACK (4x Plank End-Caps) 1 ROOF RACK (Roof Top Tent KIT) 1 Installation Instructions
1 N280 ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 4 ROOF RACK (2x Planks) [1146mm] 4 ROOF RACK (4x Plank End-Caps) 1 ROOF RACK (2x Half-Planks) [1146mm] 1 ROOF RACK (4x Half-Plank End-Caps) 1 Installation Instructions
1 N280 ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 4 ROOF RACK (2x Planks) [1146mm] 1 ROOF RACK (2x Half-Planks) [1146mm] 1 ROOF RACK (Platform Frame) [8.5 Plank] 1 Installation Instructions
1 N280 ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 1 Installation Instructions EDITIONS* WARNING *
FOR MAXIMUM SAFETY DO NOT EXCEED MANUFACTURERS ROOF WEIGHT LIMITS. Our load ratings represent the maximum mechanical forces our roof rack system can withstand before failure. Our load ratings do not address vehicle safety during high-speed manoeuvres, or changes to vehicle dynamics caused by a higher centre of gravity.
* CAUTION *
For maximum safety, loads should be evenly distributed and properly secured to avoid shifting during transport. Before using your roof rack, it is important to familiarise yourself with the proper load securing techniques and be constantly safety oriented. Please note, all of our load ratings are based on an evenly distributed load. -
UNPRECEDENTED CONFIGURABILITYChoose how many Planks you want. Position your Planks wherever you want. Move your Planks easily, whenever you want. Choose if you want a frame around the outside. Choose how many Tie-Down Plates you want, and where you want them located. Configure your rack however you want. Numerous options. Numerous configurations.
MODULAR DESIGNOur modular engineering approach allow us to deliver a roof rack system that can be easily adapted to any situation. It also means you can upgrade-downgrade your roof rack any time your needs require.
HIGH-STRENGTHAll versions deliver industry leading load ratings. These ratings were independently tested and the test results are certified to comply with Australian Standard (AS 1235-2000) as well as international standards (ISO / PAS 11154 : 2009:2006) and (DIN 75302/02: 1991). During independent testing, our roof rack system successfully withstood 330kg of upward force, 600kg of forward force (including a special 20° off-axis test). To achieve our certification we needed to have less than 10mm of movement in our structure at the tested loads, we had 0.17mm!
One of the keys to our industry leading load ratings is our Mounting Rails. Not only do they transfer forces to the strongest points on the vehicle roof, they also utilise a boxed design that resists deformation at any singular point. This unique design element creates a 'mounting system’ that is much stronger than any of our competitors.
LOW WEIGHTWe utilise the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a roof rack system with an extremely high strength-to-weight ratio. This means our roof rack has an extremely low weight, while still being the very strongest on the market.
STEALTHChief Products roof racks are engineered to be extremely aerodynamic (smooth top surface, low profile design and hidden fasteners). These unique aerodynamic features make our roof racks extremely quiet for the majority of our customers. However, the more wind you have the more wind noise will increase. For customers that live in high-wind areas or regularly drive at high-speeds (120kmh+) we've developed a Stealth Air Dam (included with every set of Mounting Rails) that significantly reduces the noise caused by high-velocity air flows. Best of all, this wind noise performance improvement is accomplished utilising a product that mounts out-of-sight (ensuring it doesn't inhibit use of your rack, or obscure views out of your sunroof).
Our roof racks deliver an experience with no creaking, no rattling, and very low wind noise. We accomplish these amazing feats through a series of technologically advanced aerodynamic methods, along with some proven old school tech (rubber isolators).
LOW PROFILEOur roof racks are engineered to sit incredibly low at only 86mm above the roofline. We looked at mounting even closer to the vehicle, but during our real-world testing we found it was helpful to have a slight gap between the roof and the rack, so you can slip a hand underneath the rack to wash your roof.
UNOBSTRUCTED VIEWSIf your vehicle has a Sunroof, our roof rack won’t block your view (position your Planks wherever you want) so you can see and experience the beauty of the nature around you.
STYLEWe poured over every design detail to ensure the N280 Roof Rack would look great from every angle. Function was our primary aim, but we also studied every line and every proportion, paying close attention to how they integrate with the lines of the N280.
FIT & FINISHWe utilise advanced manufacturing techniques to achieve a degree of fit-and-finish you have to see in-person to truly appreciate.
SMOOTH TOP SURFACEThe top of our platform is completely smooth. No bolt heads sticking up, tie-down plates that sit completely flush and fasteners that are hidden from view.
EASILY MOUNT ACCESSORIESWe make it extremely easy to mount your accessories and bring your gear with you. We provide (2) full-length channels in each plank, enabling you to use T-Nuts that slide the entire length of the Planks. Even better, is our industry leading Tie-Down Plates and Anchor Points. They provide numerous mounting options and easily slide and clamp between the Planks.
TIE-DOWN PLATESOne of the primary usability goals for our roof racks, was that you could easily bolt/fasten/tie-down to the rack at almost any location. Our custom engineered Tie-Down Plates deliver on that goal. They clamp securely between the Planks in a way that allows them to easily move and fasten anywhere along the entire length of the Planks. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to fasten/bolt just about any accessory you can find. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your platform.
NEARLY UNLIMITED ACCESSORY MOUNTING LOCATIONSWe provide heaps of mounting locations so you can easily mount accessories anywhere. To achieve that goal, we've engineered Planks you can move wherever you need them. Then we've provided two full-length channels in each Plank for captive T-Nuts, allowing you to bolt/fasten to the Plank at any point along the entire length of the Plank. Finally, for maximum flexibility we've delivered Tie-Down Plates that can easily move and fasten anywhere along the entire length of the Planks.
COMPATIBLE WITH MOST ACCESSORIESIf the accessory uses M6, M8 or M10 bolts for mounting, it will probably work with our roof rack system. If not, one of our upcoming adapter kits should take care of business.
INNOVATIVE SUITE OF ACCESSORIESChief Products engineering team has already started work on several innovative accessories to further expand the functionality of our roof rack system. Taking advantage of our ground-up approach and modular design is allowing us to develop roof rack accessories that no one has ever seen before.
INDUSTRY LEADING CORROSION PROTECTIONWe utilise aircraft-grade aluminium alloys (highly corrosion resistant) for all of the major components of our roof rack system (with a layer of UV stable highly durable powder coat to provide additional protection). For all of our steel parts we utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts, then we add a layer of UV stable powder coat on top for additional protection. All of the included fasteners are protected as well - black zinc plating, zinc flake coatings, black oxide coatings or sometimes we just choose to use stainless steel fasteners. Our aim is to keep your roof rack looking great for many years to come.
EASY TO INSTALLEasy bolt-on installation with no drilling. In addition, our bracketry is fully adjustable so it adapts to your roof.
TOP QUALITY FINISHING TOUCHESWe include all the details that matter. High tensile bolts for maximum strength. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening (critical to combat loosening from off-roading vibrations). Anti-Seize for bolted joints that are resistant to seizing (important for a product that sits on your roof fully exposed to the elements). A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
We even include a few details you might not appreciate right away. For instance, if you’re installing lights, we provide channels in our mounting rails to run your wiring, (we even provide small holes for your zip ties, so you can hold your wiring up out of sight). -
Bolts to the roof using (8) existing roof nutserts provided by Toyota. Requires drilling (2) holes in the roof gutter for installation of (2) stainless steel nutserts.Fitment confirmed on the following vehicles:2010 Toyota 4Runner2011 Toyota 4Runner2012 Toyota 4Runner2013 Toyota 4Runner2014 Toyota 4Runner2015 Toyota 4Runner2016 Toyota 4Runner2017 Toyota 4Runner2018 Toyota 4Runner2019 Toyota 4Runner2020 Toyota 4Runner2021 Toyota 4Runner2022 Toyota 4Runner2023 Toyota 4Runner2024 Toyota 4RunnerCompatible with the following products:This list is based on customer reports, Chief Products has not confirmed fitment of these products. This list will be updated regularly as customers report their experiences.INSTALLATION INSTRUCTIONS
N280 ROOF RACK (Mounting Rails)
$515.99 USD
Chief Products N280 ROOF RACK (Mounting Rails) act as the framework for our Modular Roof Rack System. Our unique modular approach, enables customers to build the roof rack they want, and easily reconfigure it whenever their needs change. Customers can have one configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). Customers get one roof rack, that can easily adapt to their needs.
Chief Products N280 ROOF RACK (Mounting Rails) act as the framework for our Modular Roof Rack System. Our unique modular approach, enables customers to build the roof rack they want, and easily reconfigure it whenever their needs change. Customers can have one configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). Customers get one roof rack, that can easily adapt to their needs.
Engineering our Mounting Rails as a key roof rack component, provides another important advantage; industry-leading load ratings (150kg dynamic & 460kg static). Our unique engineering approach, utilises a boxed design that resists deformation at any singular point, which helps transfer forces to the strongest points on the vehicle roof. When our Mounting Rails are combined with our Planks and Half-Planks, we're able to deliver a Modular Roof Rack System that provides customers with an unrivalled combination of modularity and strength.
8.1kg | INSTALLED WEIGHT |
P375 ROOF RACK
$399.99 USD
Chief Products P375 Roof Rack provides the pinnacle of performance for roof rack systems on the P375 (Ford Ranger, 2011-2021). It delivers industry-leading load ratings (150kg dynamic & 460kg static) and vehicle specific styling in a light-weight, low-profile design. Our Modular Roof Rack System provides an unrivalled amount of configurability. Customers can build the roof rack they want, and easily reconfigure it whenever their needs change. One configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). One roof rack; that can easily adapt to your needs.
-
Chief Products P375 Roof Rack provides the pinnacle of performance for roof rack systems on the P375 (Ford Ranger, 2011-2021). It delivers industry-leading load ratings (150kg dynamic & 460kg static) and vehicle specific styling in a light-weight, low-profile design. Our Modular Roof Rack System provides an unrivalled amount of configurability. Customers can build the roof rack they want, and easily reconfigure it whenever their needs change. One configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). One roof rack; that can easily adapt to your needs.
We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to keep the overall installed weight low and accomplish a degree of fit-and-finish you have to see in person to truly appreciate. The smooth top surface, low profile design and hidden fasteners have enabled us to deliver an extremely aerodynamic roof rack. Amazingly, even after thousands of kilometres of off-road driving, you won't hear any creaking or rattling. Best of all, we made it extremely easy to mount accessories - whether you're using t-nuts that slide the entire length of the Planks; or our industry-leading Tie-Down Plates that easily slide and clamp between the Planks. If you're looking for a top-quality place to carry extra gear on your next adventure, there's no doubt we've got you covered.
FEATURESMODULAR DESIGN (Mix-And-Match Components)GROUNDBREAKING CONFIGURABILITY (Easily Move & Change Components)HIGH-STRENGTH (Industry-Leading Load Ratings)TOP-QUALITY MATERIALS (Aircraft-Grade Aluminium Alloys + High-Strength Steel)INDUSTRY-LEADING DURABILITY (High-Strength + Corrosion Protection + UV Stable Coatings)INDUSTRY-LEADING CORROSION PROTECTION (Special Coatings, Materials & Hardware)EASILY MOUNT ACCESSORIES (Adjustable Planks, T-Nuts & Tie-Down Plates)PREMIUM ACCESSORIES (Top-Quality, Innovative & 3rd Party Compatibility)VEHICLE SPECIFIC STYLING (Mounting Rails & Aero)STEALTH (Low Wind Noise + No Creaking/Rattling + Unobstructed Sunroof + Stealth Air Dam)TOP QUALITY FASTENERS (Blackened Stainless or High-Tensile + Wedge-Lock Washers)FIT & FINISH (Precision Manufacturing + Unrivalled QC Processes)EASY INSTALLATION (Difficulty = 2/10)SPECIFICATIONS100kg DYNAMIC LOAD RATING (with 2x Half-Planks) 300kg STATIC LOAD RATING (with 2x Half-Planks) 150kg DYNAMIC LOAD RATING (with 2+ Planks) 460kg STATIC LOAD RATING (with 2+ Planks) 86mm OVERALL HEIGHT (above roof line) 25mm PLANK THICKNESS 28.34mm PLATFORM THICKNESS (fully assembled) 1490mm FULL PLATFORM LENGTH (fully assembled) 1246mm FULL PLATFORM WIDTH (fully assembled) 10.4kg INSTALLED WEIGHT --> Bare Bones 10.4kg INSTALLED WEIGHT --> Roof Top Text [100-300kg] 14.3kg INSTALLED WEIGHT --> Roof Top Text [150-460kg] 18.2kg INSTALLED WEIGHT --> Overland 24.6kg INSTALLED WEIGHT --> Safari 29.0kg INSTALLED WEIGHT --> Apex 7.1kg INSTALLED WEIGHT --> ((Build Your Own)) INCLUDES
1 P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 1 ROOF RACK (2x Half-Planks) [1146mm] 1 ROOF RACK (4x Half-Plank End-Caps) 1 Installation Instructions
1 P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 1 ROOF RACK (2x Half-Planks) [1146mm] 1 ROOF RACK (4x Half-Plank End-Caps) 1 Installation Instructions
1 P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 1 ROOF RACK (2x Planks) [1146mm] 1 ROOF RACK (4x Plank End-Caps) 1 ROOF RACK (Roof Top Tent KIT) 1 Installation Instructions
1 P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 3 ROOF RACK (2x Planks) [1146mm] 3 ROOF RACK (4x Plank End-Caps) 1 Installation Instructions
1 P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 3 ROOF RACK (2x Planks) [1146mm] 1 ROOF RACK (Platform Frame) [6 Plank] 1 Installation Instructions
1 P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 1 Installation Instructions EDITIONS* WARNING *
FOR MAXIMUM SAFETY DO NOT EXCEED MANUFACTURERS ROOF WEIGHT LIMITS. Our load ratings represent the maximum mechanical forces our roof rack system can withstand before failure. Our load ratings do not address vehicle safety during high-speed manoeuvres, or changes to vehicle dynamics caused by a higher centre of gravity.
* CAUTION *
For maximum safety, loads should be evenly distributed and properly secured to avoid shifting during transport. Before using your roof rack, it is important to familiarise yourself with the proper load securing techniques and be constantly safety oriented. Please note, all of our load ratings are based on an evenly distributed load. -
UNPRECEDENTED CONFIGURABILITYChoose how many Planks you want. Position your Planks wherever you want. Move your Planks easily, whenever you want. Choose if you want a frame around the outside. Choose how many Tie-Down Plates you want, and where you want them located. Configure your rack however you want. Numerous options. Numerous configurations.
MODULAR DESIGNOur modular engineering approach allow us to deliver a roof rack system that can be easily adapted to any situation. It also means you can upgrade-downgrade your roof rack any time your needs require.
HIGH-STRENGTHAll versions deliver industry leading load ratings. These ratings were independently tested and the test results are certified to comply with Australian Standard (AS 1235-2000) as well as international standards (ISO / PAS 11154 : 2009:2006) and (DIN 75302/02: 1991). During independent testing, our roof rack system successfully withstood 330kg of upward force, 600kg of forward force (including a special 20° off-axis test). To achieve our certification we needed to have less than 10mm of movement in our structure at the tested loads, we had 0.17mm!
One of the keys to our industry leading load ratings is our Mounting Rails. Not only do they transfer forces to the strongest points on the vehicle roof, they also utilise a boxed design that resists deformation at any singular point. This unique design element creates a 'mounting system’ that is much stronger than any of our competitors.
LOW WEIGHTWe utilise the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a roof rack system with an extremely high strength-to-weight ratio. This means our roof rack has an extremely low weight, while still being the very strongest on the market.
STEALTHChief Products roof racks are engineered to be extremely aerodynamic (smooth top surface, low profile design and hidden fasteners). These unique aerodynamic features make our roof racks extremely quiet for the majority of our customers. However, the more wind you have the more wind noise will increase. For customers that live in high-wind areas or regularly drive at high-speeds (120kmh+) we've developed a Stealth Air Dam (included with every set of Mounting Rails) that significantly reduces the noise caused by high-velocity air flows. Best of all, this wind noise performance improvement is accomplished utilising a product that mounts out-of-sight (ensuring it doesn't inhibit use of your rack, or obscure views out of your sunroof).
Our roof racks deliver an experience with no creaking, no rattling, and very low wind noise. We accomplish these amazing feats through a series of technologically advanced aerodynamic methods, along with some proven old school tech (rubber isolators).
LOW PROFILEOur roof racks are engineered to sit incredibly low at only 86mm above the roofline. We looked at mounting even closer to the vehicle, but during our real-world testing we found it was helpful to have a slight gap between the roof and the rack, so you can slip a hand underneath the rack to wash your roof.
UNOBSTRUCTED VIEWSIf your vehicle has a Sunroof, our roof rack won’t block your view (position your Planks wherever you want) so you can see and experience the beauty of the nature around you.
STYLEWe poured over every design detail to ensure the P375 Roof Rack would look great from every angle. Function was our primary aim, but we also studied every line and every proportion, paying close attention to how they integrate with the lines of the P375.
FIT & FINISHWe utilise advanced manufacturing techniques to achieve a degree of fit-and-finish you have to see in-person to truly appreciate.
SMOOTH TOP SURFACEThe top of our platform is completely smooth. No bolt heads sticking up, tie-down plates that sit completely flush and fasteners that are hidden from view.
EASILY MOUNT ACCESSORIESWe make it extremely easy to mount your accessories and bring your gear with you. We provide (2) full-length channels in each plank, enabling you to use T-Nuts that slide the entire length of the Planks. Even better, is our industry leading Tie-Down Plates and Anchor Points. They provide numerous mounting options and easily slide and clamp between the Planks.
TIE-DOWN PLATESOne of the primary usability goals for our roof racks, was that you could easily bolt/fasten/tie-down to the rack at almost any location. Our custom engineered Tie-Down Plates deliver on that goal. They clamp securely between the Planks in a way that allows them to easily move and fasten anywhere along the entire length of the Planks. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to fasten/bolt just about any accessory you can find. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your platform.
NEARLY UNLIMITED ACCESSORY MOUNTING LOCATIONSWe provide heaps of mounting locations so you can easily mount accessories anywhere. To achieve that goal, we've engineered Planks you can move wherever you need them. Then we've provided two full-length channels in each Plank for captive T-Nuts, allowing you to bolt/fasten to the Plank at any point along the entire length of the Plank. Finally, for maximum flexibility we've delivered Tie-Down Plates that can easily move and fasten anywhere along the entire length of the Planks.
COMPATIBLE WITH MOST ACCESSORIESIf the accessory uses M6, M8 or M10 bolts for mounting, it will probably work with our roof rack system. If not, one of our upcoming adapter kits should take care of business.
INNOVATIVE SUITE OF ACCESSORIESChief Products engineering team has already started work on several innovative accessories to further expand the functionality of our roof rack system. Taking advantage of our ground-up approach and modular design is allowing us to develop roof rack accessories that no one has ever seen before.
INDUSTRY LEADING CORROSION PROTECTIONWe utilise aircraft-grade aluminium alloys (highly corrosion resistant) for all of the major components of our roof rack system (with a layer of UV stable highly durable powder coat to provide additional protection). For all of our steel parts we utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts, then we add a layer of UV stable powder coat on top for additional protection. All of the included fasteners are protected as well - black zinc plating, zinc flake coatings, black oxide coatings or sometimes we just choose to use stainless steel fasteners. Our aim is to keep your roof rack looking great for many years to come.
EASY TO INSTALLEasy bolt-on installation with no drilling. In addition, our bracketry is fully adjustable so it adapts to your roof.
TOP QUALITY FINISHING TOUCHESWe include all the details that matter. High tensile bolts for maximum strength. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening (critical to combat loosening from off-roading vibrations). Anti-Seize for bolted joints that are resistant to seizing (important for a product that sits on your roof fully exposed to the elements). A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
We even include a few details you might not appreciate right away. For instance, if you’re installing lights, we provide channels in our mounting rails to run your wiring, (we even provide small holes for your zip ties, so you can hold your wiring up out of sight). -
Requires drilling (8) holes in the roof gutter to install stainless steel nutserts.Fitment confirmed on the following vehicles:2011 Ford Ranger2012 Ford Ranger2013 Ford Ranger2014 Ford Ranger2015 Ford Ranger2016 Ford Ranger2017 Ford Ranger2018 Ford Ranger2019 Ford Ranger2020 Ford Ranger2021 Ford RangerCompatible with the following products:This list is based on customer reports, Chief Products has not confirmed fitment of these products. This list will be updated regularly as customers report their experiences.INSTALLATION INSTRUCTIONS
P375-P703-AM2G-UP-UR ROOF RACK (Aero)
$119.99 USD
Chief Products P375-P703-AM2G-UP-UR ROOF RACK (Aero) delivers enhanced styling and aerodynamic performance. Engineered to reduce wind noise by restricting the amount of high-velocity air flowing through the confined space underneath your roof rack (diverting high-velocity air up and over your roof rack).
Chief Products P375-P703-AM2G-UP-UR ROOF RACK (Aero) delivers enhanced styling and aerodynamic performance. Engineered to reduce wind noise by restricting the amount of high-velocity air flowing through the confined space underneath your roof rack.
Ideal for customers wanting optimum aerodynamic performance in high-wind conditions, cross-wind conditions, or regular high-speed driving. P375-P703-AM2G-UP-UR ROOF RACK (Aero) can be used as a replacement for the ROOF RACK (Stealth Air Dam) or in combination.
* ROOF RACK (Stealth Air Dam) provides excellent performance for most customers and is included with every set of Chief Products Mounting Rails.
1.3kg | INSTALLED WEIGHT |
P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails)
$399.99 USD
Chief Products P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails) act as the framework for our Modular Roof Rack System. Our unique modular approach, enables customers to build the roof rack they want, and easily reconfigure it whenever their needs change. Customers can have one configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). Customers get one roof rack, that can easily adapt to their needs.
Chief Products P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails) act as the framework for our Modular Roof Rack System. Our unique modular approach, enables customers to build the roof rack they want, and easily reconfigure it whenever their needs change. Customers can have one configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). Customers get one roof rack, that can easily adapt to their needs.
Engineering our Mounting Rails as a key roof rack component, provides another important advantage; industry-leading load ratings (150kg dynamic & 460kg static). Our unique engineering approach, utilises a boxed design that resists deformation at any singular point, which helps transfer forces to the strongest points on the vehicle roof. When our Mounting Rails are combined with our Planks and Half-Planks, we're able to deliver a Modular Roof Rack System that provides customers with an unrivalled combination of modularity and strength.
7.1kg | INSTALLED WEIGHT |
P703 ROOF RACK
$399.99 USD
Chief Products P703 Roof Rack provides the pinnacle of performance for roof rack systems on the P703 (Ford Ranger, 2022-Current). It delivers industry-leading load ratings (150kg dynamic & 460kg static) and vehicle specific styling in a light-weight, low-profile design. Our Modular Roof Rack System provides an unrivalled amount of configurability. Customers can build the roof rack they want, and easily reconfigure it whenever their needs change. One configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). One roof rack; that can easily adapt to your needs.
-
Chief Products P703 Roof Rack provides the pinnacle of performance for roof rack systems on the P703 (Ford Ranger, 2022-Current). It delivers industry-leading load ratings (150kg dynamic & 460kg static) and vehicle specific styling in a light-weight, low-profile design. Our Modular Roof Rack System provides an unrivalled amount of configurability. Customers can build the roof rack they want, and easily reconfigure it whenever their needs change. One configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). One roof rack; that can easily adapt to your needs.
We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to keep the overall installed weight low and accomplish a degree of fit-and-finish you have to see in person to truly appreciate. The smooth top surface, low profile design and hidden fasteners have enabled us to deliver an extremely aerodynamic roof rack. Amazingly, even after thousands of kilometres of off-road driving, you won't hear any creaking or rattling. Best of all, we made it extremely easy to mount accessories - whether you're using t-nuts that slide the entire length of the Planks; or our industry-leading Tie-Down Plates that easily slide and clamp between the Planks. If you're looking for a top-quality place to carry extra gear on your next adventure, there's no doubt we've got you covered.
FEATURESMODULAR DESIGN (Mix-And-Match Components)GROUNDBREAKING CONFIGURABILITY (Easily Move & Change Components)HIGH-STRENGTH (Industry-Leading Load Ratings)TOP-QUALITY MATERIALS (Aircraft-Grade Aluminium Alloys + High-Strength Steel)INDUSTRY-LEADING DURABILITY (High-Strength + Corrosion Protection + UV Stable Coatings)INDUSTRY-LEADING CORROSION PROTECTION (Special Coatings, Materials & Hardware)EASILY MOUNT ACCESSORIES (Adjustable Planks, T-Nuts & Tie-Down Plates)PREMIUM ACCESSORIES (Top-Quality, Innovative & 3rd Party Compatibility)VEHICLE SPECIFIC STYLING (Mounting Rails & Aero)STEALTH (Low Wind Noise + No Creaking/Rattling + Unobstructed Sunroof + Stealth Air Dam)TOP QUALITY FASTENERS (Blackened Stainless or High-Tensile + Wedge-Lock Washers)FIT & FINISH (Precision Manufacturing + Unrivalled QC Processes)EASY INSTALLATION (Difficulty = 2/10)SPECIFICATIONS100kg DYNAMIC LOAD RATING (with 2x Half-Planks) 300kg STATIC LOAD RATING (with 2x Half-Planks) 150kg DYNAMIC LOAD RATING (with 2+ Planks) 460kg STATIC LOAD RATING (with 2+ Planks) 86mm OVERALL HEIGHT (above roof line) 25mm PLANK THICKNESS 28.34mm PLATFORM THICKNESS (fully assembled) 1490mm FULL PLATFORM LENGTH (fully assembled) 1246mm FULL PLATFORM WIDTH (fully assembled) 10.4kg INSTALLED WEIGHT --> Bare Bones 10.4kg INSTALLED WEIGHT --> Roof Top Tent [100-300kg] 14.3kg INSTALLED WEIGHT --> Roof Top Tent [150-460kg] 18.2kg INSTALLED WEIGHT --> Overland 24.6kg INSTALLED WEIGHT --> Safari 29.0kg INSTALLED WEIGHT --> Apex 7.1kg INSTALLED WEIGHT --> ((Build Your Own)) INCLUDES
1 P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails) 1 ROOF RACK (2x Half-Planks) [1146mm] 1 ROOF RACK (Stealth Air Dam) 1 ROOF RACK (4x Half-Plank End-Caps) 1 Installation Instructions
1 P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 1 ROOF RACK (2x Half-Planks) [1146mm] 1 ROOF RACK (4x Half-Plank End-Caps) 1 Installation Instructions
1 P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 1 ROOF RACK (2x Planks) [1146mm] 1 ROOF RACK (4x Plank End-Caps) 1 ROOF RACK (Roof Top Tent KIT) 1 Installation Instructions
1 P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 3 ROOF RACK (2x Planks) [1146mm] 3 ROOF RACK (4x Plank End-Caps) 1 Installation Instructions
1 P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 3 ROOF RACK (2x Planks) [1146mm] 1 ROOF RACK (Platform Frame) [6 Plank] 1 Installation Instructions
1 P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 1 Installation Instructions EDITIONS* WARNING *
FOR MAXIMUM SAFETY DO NOT EXCEED MANUFACTURERS ROOF WEIGHT LIMITS. Our load ratings represent the maximum mechanical forces our roof rack system can withstand before failure. Our load ratings do not address vehicle safety during high-speed manoeuvres, or changes to vehicle dynamics caused by a higher centre of gravity.
* CAUTION *
For maximum safety, loads should be evenly distributed and properly secured to avoid shifting during transport. Before using your roof rack, it is important to familiarise yourself with the proper load securing techniques and be constantly safety oriented. Please note, all of our load ratings are based on an evenly distributed load. -
UNPRECEDENTED CONFIGURABILITYChoose how many Planks you want. Position your Planks wherever you want. Move your Planks easily, whenever you want. Choose if you want a frame around the outside. Choose how many Tie-Down Plates you want, and where you want them located. Configure your rack however you want. Numerous options. Numerous configurations.
MODULAR DESIGNOur modular engineering approach allow us to deliver a roof rack system that can be easily adapted to any situation. It also means you can upgrade-downgrade your roof rack any time your needs require.
HIGH-STRENGTHAll versions deliver industry leading load ratings. These ratings were independently tested and the test results are certified to comply with Australian Standard (AS 1235-2000) as well as international standards (ISO / PAS 11154 : 2009:2006) and (DIN 75302/02: 1991). During independent testing, our roof rack system successfully withstood 330kg of upward force, 600kg of forward force (including a special 20° off-axis test). To achieve our certification we needed to have less than 10mm of movement in our structure at the tested loads, we had 0.17mm!
One of the keys to our industry leading load ratings is our Mounting Rails. Not only do they transfer forces to the strongest points on the vehicle roof, they also utilise a boxed design that resists deformation at any singular point. This unique design element creates a 'mounting system’ that is much stronger than any of our competitors.
LOW WEIGHTWe utilise the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a roof rack system with an extremely high strength-to-weight ratio. This means our roof rack has an extremely low weight, while still being the very strongest on the market.
STEALTHChief Products roof racks are engineered to be extremely aerodynamic (smooth top surface, low profile design and hidden fasteners). These unique aerodynamic features make our roof racks extremely quiet for the majority of our customers. However, the more wind you have the more wind noise will increase. For customers that live in high-wind areas or regularly drive at high-speeds (120kmh+) we've developed a Stealth Air Dam (included with every set of Mounting Rails) that significantly reduces the noise caused by high-velocity air flows. Best of all, this wind noise performance improvement is accomplished utilising a product that mounts out-of-sight (ensuring it doesn't inhibit use of your rack, or obscure views out of your sunroof).
Our roof racks deliver an experience with no creaking, no rattling, and very low wind noise. We accomplish these amazing feats through a series of technologically advanced aerodynamic methods, along with some proven old school tech (rubber isolators).
LOW PROFILEOur roof racks are engineered to sit incredibly low at only 86mm above the roofline. We looked at mounting even closer to the vehicle, but during our real-world testing we found it was helpful to have a slight gap between the roof and the rack, so you can slip a hand underneath the rack to wash your roof.
UNOBSTRUCTED VIEWSIf your vehicle has a Sunroof, our roof rack won’t block your view (position your Planks wherever you want) so you can see and experience the beauty of the nature around you.
STYLEWe poured over every design detail to ensure the P703 Roof Rack would look great from every angle. Function was our primary aim, but we also studied every line and every proportion, paying close attention to how they integrate with the lines of the P703.
FIT & FINISHWe utilise advanced manufacturing techniques to achieve a degree of fit-and-finish you have to see in-person to truly appreciate.
SMOOTH TOP SURFACEThe top of our platform is completely smooth. No bolt heads sticking up, tie-down plates that sit completely flush and fasteners that are hidden from view.
EASILY MOUNT ACCESSORIESWe make it extremely easy to mount your accessories and bring your gear with you. We provide (2) full-length channels in each plank, enabling you to use T-Nuts that slide the entire length of the Planks. Even better, is our industry leading Tie-Down Plates and Anchor Points. They provide numerous mounting options and easily slide and clamp between the Planks.
TIE-DOWN PLATESOne of the primary usability goals for our roof racks, was that you could easily bolt/fasten/tie-down to the rack at almost any location. Our custom engineered Tie-Down Plates deliver on that goal. They clamp securely between the Planks in a way that allows them to easily move and fasten anywhere along the entire length of the Planks. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to fasten/bolt just about any accessory you can find. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your platform.
NEARLY UNLIMITED ACCESSORY MOUNTING LOCATIONSWe provide heaps of mounting locations so you can easily mount accessories anywhere. To achieve that goal, we've engineered Planks you can move wherever you need them. Then we've provided two full-length channels in each Plank for captive T-Nuts, allowing you to bolt/fasten to the Plank at any point along the entire length of the Plank. Finally, for maximum flexibility we've delivered Tie-Down Plates that can easily move and fasten anywhere along the entire length of the Planks.
COMPATIBLE WITH MOST ACCESSORIESIf the accessory uses M6, M8 or M10 bolts for mounting, it will probably work with our roof rack system. If not, one of our upcoming adapter kits should take care of business.
INNOVATIVE SUITE OF ACCESSORIESChief Products engineering team has already started work on several innovative accessories to further expand the functionality of our roof rack system. Taking advantage of our ground-up approach and modular design is allowing us to develop roof rack accessories that no one has ever seen before.
INDUSTRY LEADING CORROSION PROTECTIONWe utilise aircraft-grade aluminium alloys (highly corrosion resistant) for all of the major components of our roof rack system (with a layer of UV stable highly durable powder coat to provide additional protection). For all of our steel parts we utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts, then we add a layer of UV stable powder coat on top for additional protection. All of the included fasteners are protected as well - black zinc plating, zinc flake coatings, black oxide coatings or sometimes we just choose to use stainless steel fasteners. Our aim is to keep your roof rack looking great for many years to come.
EASY TO INSTALLEasy bolt-on installation with no drilling. In addition, our bracketry is fully adjustable so it adapts to your roof.
TOP QUALITY FINISHING TOUCHESWe include all the details that matter. High tensile bolts for maximum strength. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening (critical to combat loosening from off-roading vibrations). Anti-Seize for bolted joints that are resistant to seizing (important for a product that sits on your roof fully exposed to the elements). A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
We even include a few details you might not appreciate right away. For instance, if you’re installing lights, we provide channels in our mounting rails to run your wiring, (we even provide small holes for your zip ties, so you can hold your wiring up out of sight). -
Requires drilling (8) holes in the roof gutter to install stainless steel nutserts.Fitment confirmed on the following vehicles:2022 Ford Ranger2023 Ford Ranger2024 Ford RangerCompatible with the following products:This list is based on customer reports, Chief Products has not confirmed fitment of these products. This list will be updated regularly as customers report their experiences.INSTALLATION INSTRUCTIONS
ROOF RACK (10x T-Nuts) [BLACK]
$29.99 USD
Motor Vehicle Carrying Rack AccessoriesChief Products ROOF RACK (T-Nuts) are engineered to provide maximum performance and compatibility with our Modular Roof Rack System. We offer our (10x) pack of T-Nuts in (3) sizes (M6, M8 & M10) to ensure you have the right size, no matter what accessory you're mounting. Designed to fit perfectly within our Planks, Half-Planks, and Tie-Down Plates. Our high-tensile (10.9) T-Nuts can handle anything you throw at them. Best of all, each T-Nut is protected with a rich black heavy-duty zinc-nickel plating, to ensure it will look great when installed, and stay that way even in the most hostile environments.
Chief Products ROOF RACK (T-Nuts) are engineered to provide maximum performance and compatibility with our Modular Roof Rack System. We offer our (10x) pack of T-Nuts in (3) sizes (M6, M8 & M10) to ensure you have the right size, no matter what accessory you're mounting. Designed to fit perfectly within our Planks, Half-Planks, and Tie-Down Plates. Our high-tensile (10.9) T-Nuts can handle anything you throw at them. Best of all, each T-Nut is protected with a rich black heavy-duty zinc-nickel plating, to ensure it will look great when installed, and stay that way even in the most hostile environments.
10 | T-Nuts [BLACK] [M6] |
10 | T-Nuts [BLACK] [M8] |
10 | T-Nuts [BLACK] [M10] |
ROOF RACK (2x Half-Planks) [1146mm]
$135.99 USD
Chief Products ROOF RACK (Half-Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Half-Plank provides a channel for captive T-Nuts. This feature allows you to easily bolt accessories to the Half-Plank at any point along the entire length.
Chief Products ROOF RACK (Half-Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Half-Plank provides a channel for captive T-Nuts. This feature allows you to easily bolt accessories to the Half-Plank at any point along the entire length.
We provide (2) Half-Planks; each measuring 1146mm (45.12") long, 77mm (3.03") wide and an amazing 25mm (0.98") thin. We utilise a proprietary Aircraft-Grade Aluminium Alloy and an advanced Extrusion Manufacturing Process that allows us to deliver Half-Planks with an extremely high strength-to-weight ratio.
1146mm | HALF-PLANK LENGTH (45.12 inches) |
77mm | HALF-PLANK WIDTH (6.14 inches) |
25mm | HALF-PLANK THICKNESS (0.98 inches) |
1.51kg | INSTALLED WEIGHT --> 1 Half-Plank |
ROOF RACK (2x Planks) [1146mm]
$199.99 USD
Chief Products ROOF RACK (Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to easily bolt accessories to the Plank at any point along the entire length.
Chief Products ROOF RACK (Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to easily bolt accessories to the Plank at any point along the entire length.
We provide (2) Planks; each measuring 1146mm (45.12") long, 156mm (6.14") wide, and an amazing 25mm (0.98") thin. We utilise a proprietary Aircraft-Grade Aluminium Alloy and an advanced Extrusion Manufacturing Process that allows us to deliver Planks with an extremely high strength-to-weight ratio.
1146mm | PLANK LENGTH (45.12 inches) |
156mm | PLANK WIDTH (6.14 inches) |
25mm | PLANK THICKNESS (0.98 inches) |
2.52kg | INSTALLED WEIGHT --> 1 Plank |
ROOF RACK (2x Tie-Down Plates)
$69.99 USD $76.99 USD
Chief Products ROOF RACK (Tie-Down Plates) are engineered to provide multiple ways to secure gear and accessories to your roof rack. They clamp securely between our Planks in a way that allows them to easily locate anywhere along the entire length of the Planks.
Manufactured from Aircraft-Grade Aluminium Alloys and High-Strength Steel, they're extremely strong to meet the high demands they're sure to encounter. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to easily secure any accessories you need. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your roof rack.
Chief Products ROOF RACK (Tie-Down Plates) are engineered to provide multiple ways to secure gear and accessories to your roof rack. They clamp securely between our Planks in a way that allows them to easily locate anywhere along the entire length of the Planks.
Manufactured from Aircraft-Grade Aluminium Alloys and High-Strength Steel, they're extremely strong to meet the high demands they're sure to encounter. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to easily secure any accessories you need. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your roof rack.
115mm | TIE-DOWN PLATE LENGTH (4.53 inches) |
110mm | TIE-DOWN PLATE WIDTH (4.33 inches) |
0.50kg | INSTALLED WEIGHT |
TIE-DOWN STRAP HOOK on CENTRE SECTION |
ROPE pass through CENTRE SECTION |
(2) T-NUT SLOTS --> M8 BOLT into M8 T-NUT (upper location between plates; includes room for bolt pass through) |
(2) T-NUT SLOTS --> M10 BOLT into M10 T-NUT (upper location between plates; includes room for bolt pass through) |
(2) T-NUT SLOTS --> M8 BOLT into M8 T-NUT (HEAVY DUTY --> lower location below both plates; includes room for bolt pass through) |
(2) T-NUT SLOTS --> M10 BOLT into M10 T-NUT (HEAVY DUTY --> lower location below both plates; includes room for bolt pass through) |
(2) T-NUT SLOTS --> M12 CARRIAGE BOLT into SQUARE HOLE (Lower Plate) (HEAVY DUTY --> up through lower plate) |
(2) T-NUT SLOTS --> M8, M10 & M12 BOLT pass through both PLATES (nut below lower plate) |
(2) M8 MOUNTING BOLTS --> REPLACE with LONGER MOUNTING BOLT (using weld nut on lower plate) |
ROOF RACK (4x Half-Plank End-Caps)
$25.99 USD
Chief Products ROOF RACK (Half-Plank End-Caps) provide a nice finish to the ends of our Half-Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Half-Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Half-Plank End-Caps; enough for (2) Half-Planks. They bolt on easily and feature (7) slots.
Chief Products ROOF RACK (Half-Plank End-Caps) provide a nice finish to the ends of our Half-Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Half-Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Half-Plank End-Caps; enough for (2) Half-Planks. They bolt on easily and feature (7) slots.
ROOF RACK (4x Plank End-Caps)
$29.99 USD
Chief Products ROOF RACK (Plank End-Caps) provide a nice finish to the ends of our Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Plank End-Caps; enough for (2) Planks. They bolt on easily and feature (7) slots.
Chief Products ROOF RACK (Plank End-Caps) provide a nice finish to the ends of our Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Plank End-Caps; enough for (2) Planks. They bolt on easily and feature (7) slots.
ROOF RACK (Adjustable Load Rails)
$169.99 USD
Chief Products ROOF RACK (Adjustable Load Rails) are engineered to be multi-functional; acting as a border, divider, grab handle or high-strength way to secure gear. Using our T-Nuts, they can be easily mounted anywhere on your roof rack. Sideways, crossways, or bridging across multiple Planks. We provide (3) different sizes, so you can combine multiple Load Rails to create the exact configuration you need. Want to change your configuration? Loosen the t-nuts, slide the Load Rails into a new position, and retighten. It's that simple!
Chief Products ROOF RACK (Adjustable Load Rails) are engineered to be multi-functional; acting as a border, divider, grab handle or high-strength way to secure gear. Using our T-Nuts, they can be easily mounted anywhere on your roof rack. Sideways, crossways, or bridging across multiple Planks. We provide (3) different sizes, so you can combine multiple Load Rails to create the exact configuration you need. Want to change your configuration? Loosen the t-nuts, slide the Load Rails into a new position, and retighten. It's that simple!
We've utilised the latest manufacturing techniques and Aircraft-Grade Aluminium Alloys to deliver a product that is light, strong, highly-durable and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.
260mm | TUBE LENGTH --> SHORT |
440mm | TUBE LENGTH --> MID |
1260mm | TUBE LENGTH --> LONG |
1.1kg | INSTALLED WEIGHT --> SHORT |
1.3kg | INSTALLED WEIGHT --> MID |
2.4kg | INSTALLED WEIGHT --> LONG |
4 | Die-Cast Mounting Feet |
2 | Short Tubes (260mm) |
2 | Mid Tubes (440mm) |
1 | Hardware KIT |
1 | Installation Instructions |
6 | Die-Cast Mounting Feet |
2 | Long Tubes (1260mm) |
1 | Hardware KIT |
1 | Installation Instructions |
ROOF RACK (Platform Frame) [6 Plank]
$309.99 USD
Chief Products ROOF RACK (Platform Frame) is designed to provide your roof rack with a smooth outside border that looks great, adds strength, and delivers improved aerodynamics. The corners of our Platform Frame are die-cast from a proprietary Aircraft-Grade Aluminium Alloy. The frame rails utilise the same Aircraft-Grade Aluminium Alloy combined with an advanced Extrusion Manufacturing Process. We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a product that is light, strong, highly durable and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.
Chief Products ROOF RACK (Platform Frame) is designed to provide your roof rack with a smooth outside border that looks great, adds strength, and delivers improved aerodynamics. The corners of our Platform Frame are die-cast from a proprietary Aircraft-Grade Aluminium Alloy. The frame rails utilise the same Aircraft-Grade Aluminium Alloy combined with an advanced Extrusion Manufacturing Process. We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a product that is light, strong, highly durable and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.
1490mm | PLATFORM FRAME LENGTH |
1246mm | PLATFORM FRAME WIDTH |
28.34mm | PLATFORM FRAME THICKNESS |
6.3kg | INSTALLED WEIGHT |
ROOF RACK (Platform Frame) [7 Plank]
$329.99 USD
Chief Products ROOF RACK (Platform Frame) is designed to provide your roof rack with a smooth outside border that looks great, adds strength, and delivers improved aerodynamics. The corners of our Platform Frame are die-cast from a proprietary Aircraft-Grade Aluminium Alloy. The frame rails utilise the same Aircraft-Grade Aluminium Alloy combined with an advanced Extrusion Manufacturing Process. We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a product that is light, strong, highly durable and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.
Chief Products ROOF RACK (Platform Frame) is designed to provide your roof rack with a smooth outside border that looks great, adds strength, and delivers improved aerodynamics. The corners of our Platform Frame are die-cast from a proprietary Aircraft-Grade Aluminium Alloy. The frame rails utilise the same Aircraft-Grade Aluminium Alloy combined with an advanced Extrusion Manufacturing Process. We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a product that is light, strong, highly durable and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.
1740mm | PLATFORM FRAME LENGTH |
1246mm | PLATFORM FRAME WIDTH |
28.34mm | PLATFORM FRAME THICKNESS |
6.9kg | INSTALLED WEIGHT |
ROOF RACK (Platform Frame) [8 Plank]
$349.99 USD
Chief Products ROOF RACK (Platform Frame) is designed to provide your roof rack with a smooth outside border that looks great, adds strength, and delivers improved aerodynamics. The corners of our Platform Frame are die-cast from a proprietary Aircraft-Grade Aluminium Alloy. The frame rails utilise the same Aircraft-Grade Aluminium Alloy combined with an advanced Extrusion Manufacturing Process. We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a product that is light, strong, highly durable and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.
Chief Products ROOF RACK (Platform Frame) is designed to provide your roof rack with a smooth outside border that looks great, adds strength, and delivers improved aerodynamics. The corners of our Platform Frame are die-cast from a proprietary Aircraft-Grade Aluminium Alloy. The frame rails utilise the same Aircraft-Grade Aluminium Alloy combined with an advanced Extrusion Manufacturing Process. We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a product that is light, strong, highly durable and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.
1990mm | PLATFORM FRAME LENGTH |
1246mm | PLATFORM FRAME WIDTH |
28.34mm | PLATFORM FRAME THICKNESS |
7.5kg | INSTALLED WEIGHT |
ROOF RACK (Platform Frame) [8.5 Plank]
$369.99 USD
Chief Products ROOF RACK (Platform Frame) is designed to provide your roof rack with a smooth outside border that looks great, adds strength, and delivers improved aerodynamics. The corners of our Platform Frame are die-cast from a proprietary Aircraft-Grade Aluminium Alloy. The frame rails utilise the same Aircraft-Grade Aluminium Alloy combined with an advanced Extrusion Manufacturing Process. We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a product that is light, strong, highly durable and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.
Chief Products ROOF RACK (Platform Frame) is designed to provide your roof rack with a smooth outside border that looks great, adds strength, and delivers improved aerodynamics. The corners of our Platform Frame are die-cast from a proprietary Aircraft-Grade Aluminium Alloy. The frame rails utilise the same Aircraft-Grade Aluminium Alloy combined with an advanced Extrusion Manufacturing Process. We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a product that is light, strong, highly durable and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.
2160mm | PLATFORM FRAME LENGTH |
1246mm | PLATFORM FRAME WIDTH |
28.34mm | PLATFORM FRAME THICKNESS |
7.8kg | INSTALLED WEIGHT |
ROOF RACK (Roof Top Tent KIT)
$29.99 USD
Chief Products ROOF RACK (Roof Top Tent KIT) is designed to make installation of your Roof Top Tent super easy. The KIT includes (4) Roof Top Tent Brackets made from 5mm steel. These brackets, along with the mounting hardware from your RTT, enable you to easily and securely clamp your Roof Top Tent onto our Planks. For most customers, this KIT isn't required when using Chief Products ROOF RACK (2x Half-Planks).
Chief Products ROOF RACK (Roof Top Tent KIT) is designed to make installation of your Roof Top Tent super easy. The KIT includes (4) Roof Top Tent Brackets made from 5mm steel. These brackets, along with the mounting hardware from your RTT, enable you to easily and securely clamp your Roof Top Tent onto our Planks. For most customers, this KIT isn't required when using Chief Products ROOF RACK (2x Half-Planks).
SHOP RAGS [5 PACK]
$10.00 USD
The classic shop rag is all about function. Perfect for wiping grease off your hands in the garage or a bit of mud off your favourite tools in the bush. We print these classic rags with a special ink that is extremely rugged and resistant to grease and oil. Stuff them in a tool bag or the back of your garage. They're simple, durable and ready to withstand the tough life they're sure to encounter.
The classic shop rag is all about function. Perfect for wiping grease off your hands in the garage or a bit of mud off your favourite tools in the bush. We print these classic rags with a special ink that is extremely rugged and resistant to grease and oil. Stuff them in a tool bag or the back of your garage. They're simple, durable and ready to withstand the tough life they're sure to encounter.
Designed and field tested by Chief Products Basecamp Team - Mudgeeraba, Australia.
STICKER PACK
Out of Stock $5.00 USD $12.99 USD
A collection of high quality stickers, providing guaranteed style on the fly. Perfect for use on internal combustion machines, windows, luggage, camping gear and small children.
A collection of high quality stickers, providing guaranteed style on the fly. Perfect for use on internal combustion machines, windows, camping gear and small children.
Designed and field tested by Chief Products Basecamp Team - Mudgeeraba, Australia.
TRUCKER CAP (Classic Logo)
$20.00 USD
We designed this classic trucker for the Chief Products team and those who share our appetite for adventure. It features heavy-duty nylon mesh on the back, with Chief Products classic logo up front. Plastic snap adjuster, one size fits most.
We designed this classic trucker for the Chief Products team and those who share our appetite for adventure. It features heavy-duty nylon mesh on the back, with Chief Products classic logo up front. Plastic snap adjuster, one size fits most.
Designed and field tested by Chief Products Basecamp Team - Mudgeeraba, Australia.
WK2 AIR SUSPENSION KIT
$28.99 USD
An installation KIT for the WK2 Off-Road Front Bumper and WK2 Hidden Winch Mount. It provides the required mounting bracket & hardware for the Quadra-Lift Air Suspension.
An installation KIT for the WK2 Off-Road Front Bumper and WK2 Hidden Winch Mount. It provides the required mounting bracket & hardware for the Quadra-Lift Air Suspension.
WK2 CHASSIS MOUNTS (Front)
$159.99 USD
Chief Products WK2 Chassis Mounts (Front) provide a secure connection to the front of your WK2 (Jeep Grand Cherokee 2011-2020). Engineered to distribute forces to the chassis of your WK2 over multiple mounting points (for maximum strength and reliability). These Chassis Mounts play a critical role in the Engineer Certified Ratings (10,000lbs WLL) of our WK2 Off-Road Front Bumper and WK2 Hidden Winch Mount. They've been FEA tested, tested by independent 3rd parties (including crash testing for ADR compliance) and real-world tested in numerous scenarios; including off-axis recoveries and snatch block recoveries. In other words, this is a product you can count on when you're stuck in the middle of nowhere and you need it most.
Chief Products WK2 Chassis Mounts (Front) provide a secure connection to the front of your WK2 (Jeep Grand Cherokee 2011-2020). Engineered to distribute forces to the chassis of your WK2 over multiple mounting points (for maximum strength and reliability). These Chassis Mounts play a critical role in the Engineer Certified Ratings (10,000lbs WLL) of our WK2 Off-Road Front Bumper and WK2 Hidden Winch Mount. They've been FEA tested, tested by independent 3rd parties (including crash testing for ADR compliance) and real-world tested in numerous scenarios; including off-axis recoveries and snatch block recoveries. In other words, this is a product you can count on when you're stuck in the middle of nowhere and you need it most.
WK2 HIDDEN WINCH MOUNT
$476.98 USD
Chief Products WK2 Hidden Winch Mount provides a high-strength place to mount your winch without ruining your Jeep's good looks. We've engineered a winch mounting system that can remain completely hidden while still being 100% compatible with all of your Jeep's safety systems (air bags, adaptive cruise control, forward collision warning, lane departure warning and parking sensor systems). It delivers numerous industry leading features - including an engineer certified 10,000lb max rating, E-Coat Corrosion Protection and a very low 12.85kg install weight. By positioning the winch between the chassis structure (lower than our competitors) we're able to provide significantly improved cooling, better off-axis strength, as well as more space for larger winches. Best of all, we spent (12) months performing rigorous real world testing to ensure you can rely on our winch mounting system when you need it most.
-
Chief Products WK2 Hidden Winch Mount provides a high-strength place to mount your winch without ruining your Jeep's good looks. We've engineered a winch mounting system that can remain completely hidden while still being 100% compatible with all of your Jeep's safety systems (air bags, adaptive cruise control, forward collision warning, lane departure warning and parking sensor systems). It delivers numerous industry leading features - including an engineer certified 10,000lb max rating, E-Coat Corrosion Protection and a very low 12.85kg install weight. By positioning the winch between the chassis structure (lower than our competitors) we're able to provide significantly improved cooling, better off-axis strength, as well as more space for larger winches. Best of all, we spent (12) months performing rigorous real world testing to ensure you can rely on our winch mounting system when you need it most.
FEATURESHIGH-STRENGTH STEEL (High Strength To Weight Ratio)DURABLE POWDER COAT FINISH (Advanced Polyester Thermosetting Powder)E-COAT (Industry Leading Corrosion Protection)Drainage SlotsEASY INSTALLATION (Difficulty = 4/10)SPECIFICATIONS10,000lbs WORKING LOAD LIMIT [Engineer Certified] 12.85kg INSTALLED WEIGHT (approximate without winch) Same As Stock APPROACH ANGLE (lower front fascia installed) INCLUDES1 Winch Cradle (2011-2015) 2 WK2 Chassis Mounts (Front) 2 Bonnet Supports 2 Chassis Support Brackets 2 Chassis Mounting Plates 6 M12 x 35mm High Tensile (10.9) Bolts (Zinc Plated) 6 M10 x 40mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 25mm (10.9) Bolts (Zinc Plated) 2 M6 x 25mm (10.9) Bolts (Zinc Plated) 6 M12 Wedge-Lock Extended Washers (Zinc Flake Coating) 6 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 x 32mm Washers (Zinc Plated) 2 M10 (CL10) Hex Nuts (Zinc Plated) 4 XMas Tree Fasteners (Black Plastic) 1 4g pouch Anti-Seize 1 Installation Instructions 1 Winch Cradle (2016+) 2 WK2 Chassis Mounts (Front) 2 Bonnet Supports 2 Chassis Support Brackets 2 Chassis Mounting Plates 6 M12 x 35mm High Tensile (10.9) Bolts (Zinc Plated) 6 M10 x 40mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 25mm (10.9) Bolts (Zinc Plated) 2 M6 x 25mm (10.9) Bolts (Zinc Plated) 6 M12 Wedge-Lock Extended Washers (Zinc Flake Coating) 6 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 x 32mm Washers (Zinc Plated) 2 M10 (CL10) Hex Nuts (Zinc Plated) 4 XMas Tree Fasteners (Black Plastic) 1 4g pouch Anti-Seize 1 Installation Instructions OPTIONS -
High-StrengthWe've engineered our hidden winch system from the ground-up to evenly distribute recovery forces to the chassis of the WK2. This unique approach is especially important during high load pulls and off-axis recoveries that can easily twist (and sometimes even tear) the monocoque chassis of the WK2. Unlike our competitors, we mount to the chassis in multiple locations and strategically use high-strength steels to ensure recovery forces are evenly distributed and don't overload the chassis mounting points. Through FEA computer modelling and (12) months of real world testing we've delivered a high-strength winch mounting system that you can rely on when you need it most.
Maintain OEM AppearanceThe WK2 Hidden Winch Mount can be installed behind your bumper and lower front fascia, maintaining the great looks of your Jeep Grand Cherokee. Then if needed you can still easily remove the lower front fascia when heading off-road.
Low Installed WeightOnly 12.85kg when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) - 90kgs (steel).
Better CoolingBy positioning our winch cradle lower than our competitors, we're able to achieve significantly better air flow to the radiator, which delivers much better cooling in hot weather. This is especially important if you're towing or have additional items (off-road lights, etc.) restricting airflow to the radiator core.
Lower Winch PositionOur lower winch position provides numerous benefits. In addition to providing significantly better cooling, it also enables installation of taller winches, doesn’t interfere with number plate mounting and positions the winch directly between the frame rails for maximum strength.
Maximum Approach AngleSince our design doesn't extend past the front of your WK2, the maximum approach angle is retained.
Compatible With Adaptive Cruise ControlThrough careful engineering & testing we've delivered a hidden winch mounting system that is compatible with the adaptive cruise control system on all WK2 models.
Compatible With Parking SensorsThrough careful engineering & testing we've delivered a winch mount that is compatible with parking sensors on all WK2 models.
Compatible With Our Entire Product LineAlready own our WK2 Lower Front Guard, WK2 Sump Protection Plate, WK2 Recovery Hooks, WK2 Recovery Points or WK2 Nudge Bar? We’ve designed the WK2 Hidden Winch Mount to integrate easily with all of our products.
Compatible With Excellent Front Recovery OptionsCan be installed with OEM Tow Hooks or Chief Products WK2 Recovery Points & WK2 Recovery Hooks (engineer rated to 4,500kg).
Industry Leading Corrosion ProtectionWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.
Real World TestingThere aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.
Top Quality Finishing TouchesWe include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great. -
Bolts into existing mounting points in the frame, no drilling or cutting required. Installation of lower front fascia requires cutting a hole for the winch fairlead.WK2 Hidden Winch Mount fits the following vehicles:2011 Jeep Grand Cherokee - All Models & Limited Editions2012 Jeep Grand Cherokee - All Models & Limited Editions2013 Jeep Grand Cherokee - All Models & Limited Editions2014 Jeep Grand Cherokee - All Models & Limited Editions2015 Jeep Grand Cherokee - All Models & Limited Editions2016 Jeep Grand Cherokee - All Models & Limited Editions2017 Jeep Grand Cherokee - All Models & Limited Editions2018 Jeep Grand Cherokee - All Models & Limited Editions2019 Jeep Grand Cherokee - All Models & Limited Editions2020 Jeep Grand Cherokee - All Models & Limited Editions2021 Jeep Grand Cherokee - All Models & Limited Editions
* Fits USA & Export models.** Fitment on Summit & High Altitude (including all models with same lower front fascia) requires permanent removal of the lower front fascia.*** Fitment on SRT requires cutting-modification of the lower front fascia, as well as relocation of the power steering cooler (no bracketry is provided for power steering cooler relocation).Fitment unconfirmed on the following vehicles:2018-2020 Jeep Grand Cherokee - TrackhawkFitment confirmed with the following products:Warn Zeon 10-S PlatinumSmittybilt Gen2 X20 Comp (10,000lb)** OEM Tow Hooks (part# 82212095)
* Fitment with Australian versions of the WK2 Lower Front Guard (purchased before March 2017), requires (2) metal tabs be cut-removed from the centre section of the WK2 Lower Front Guard. This modification is not required for USA model WK2 Lower Front Guards or any WK2 Lower Front Guards purchased after March 2017.
** You can install OEM Tow Hooks OR the WK2 Lower Front Guard with the WK2 Hidden Winch Mount. You cannot install OEM Tow Hooks AND the WK2 Lower Front Guard with the WK2 Hidden Winch Mount. For more information read our Support Article, (here).Does NOT fit with the following products:Jeep Australia Tow Hook (part# CH8220WKRH or AUSWK14HOOK)INSTALLATION INSTRUCTIONS -
WK2 HIDDEN WINCH MOUNT (ACC Camera KIT)
Out of Stock $18.99 USD
An installation kit for the WK2 Hidden Winch Mount. It provides the required mounting bracket & hardware for the Adaptive Cruise Control Camera.
An installation kit for the WK2 Hidden Winch Mount. It provides the required mounting bracket & hardware for the Adaptive Cruise Control Camera.
WK2 HIDDEN WINCH MOUNT (OEM Tow Hooks KIT)
$36.99 USD
An installation kit for the WK2 Hidden Winch Mount. It provides the required mounting brackets & hardware for installation of OEM Tow Hooks with WK2 Hidden Winch Mount.
An installation kit for the WK2 Hidden Winch Mount. It provides the required mounting brackets & hardware for installation of OEM Tow Hooks with WK2 Hidden Winch Mount.
* Please note; this kit will not allow installation of OEM Tow Hooks with any other product. It only provides compatibility for the WK2 Hidden Winch Mount (when the WK2 Hidden Winch Mount is installed on its own).
WK2 HIDDEN WINCH MOUNT (WK2 Lower Front Guard KIT)
$31.99 USD
An installation kit for the WK2 Hidden Winch Mount. It provides a strengthening bracket for the WK2 Lower Front Guard. This bracket is recommended, but not required.
An installation kit for the WK2 Hidden Winch Mount. It provides a strengthening bracket for the WK2 Lower Front Guard. This bracket is recommended, but not required.
WK2 LOWER FRONT GUARD
$469.99 USD
Chief Products WK2 LOWER FRONT GUARD is engineered to protect the critical components at the lower front of your WK2 without ruining your Jeep's good looks. Weighing only 15kg (approx.) when fully installed, it provides off-road protection for the Lower Radiator Core, ACC Camera, Windshield Washer Bottle and Air Suspension Controller. It features a centre section made from 5mm high-strength steel for unparalleled strength, while still providing critical airflow to the lower radiator core. Bolted directly to the sub-frame it provides the very best approach angle possible, and our Bolt Head Protectors protect the front mounting bolts from off-road damage. Best of all, we've designed the WK2 LOWER FRONT GUARD so it installs behind the removable lower front fascia, providing full protection off-road while still allowing you to maintain a factory appearance on-road.
-
Chief Products WK2 LOWER FRONT GUARD is engineered to protect the critical components at the lower front of your WK2 without ruining your Jeep's good looks. Weighing only 15kg (approx.) when fully installed, it provides off-road protection for the Lower Radiator Core, ACC Camera, Windshield Washer Bottle and Air Suspension Controller. It features a centre section made from 5mm high-strength steel for unparalleled strength, while still providing critical airflow to the lower radiator core. Bolted directly to the sub-frame it provides the very best approach angle possible, and our Bolt Head Protectors protect the front mounting bolts from off-road damage. Best of all, we've designed the WK2 LOWER FRONT GUARD so it installs behind the removable lower front fascia, providing full protection off-road while still allowing you to maintain a factory appearance on-road.
We've created a modular system of protection products for the WK2, this means our WK2 LOWER FRONT GUARD will integrate perfectly with all of our other products --> WK2 HIDDEN WINCH MOUNT, WK2 SUMP PROTECTION PLATE, WK2 NUDGE BAR, WK2 RECOVERY HOOK and WK2 RECOVERY POINT.
FEATURESHIGH-STRENGTH STEEL (High Strength to Weight Ratio)DURABLE POWDER COAT FINISH (Textured Black)E-COAT (Industry Leading Corrosion Protection)AIRFLOW SLOTSDRAINAGE SLOTSEASY INSTALLATION (Difficulty = 4/10)SPECIFICATIONS14.90kg INSTALLED WEIGHT --> (BASE) + STANDARD GUARD 15.20kg INSTALLED WEIGHT --> (BASE) + ACC GUARD +4.2° APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with STANDARD GUARD) +2.2° APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with ACC GUARD) +10.6° APPROACH ANGLE (Summit & SRT with STANDARD GUARD) +8.6° APPROACH ANGLE (Summit & SRT with ACC GUARD) * Approach Angle calculations represent improvement over stock (based on stock tyres, lower front fascia removed and air suspension in STD height). Raising the air suspension or installing larger tyres will increase the approach angle improvements.INCLUDES1 Guard KIT (Standard)
1 Centre Section (5mm High-Strength Steel) 2 Chassis Mounting Brackets 2 Corner Mounting Brackets 2 Corner Guards 1 Air Dam Reinforcement Bracket 4 M6 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 2 M8 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 4 M10 x 25mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 100mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 30mm High Tensile (8.8) Bolts (Zinc Plated) 14 M8 x 25mm High Tensile (8.8) Bolts (Black Zinc Plated) 4 M6 x 40mm High Tensile (10.9) Bolts (Zinc Plated) 4 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 18 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 4 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 x 8mm Bushings (6061 Aluminium) 12 M6 x 25mm Washers (Zinc Plated) 4 M6 Nutserts (Stainless Steel) 1 4g pouch Anti-Seize 1 Installation Instructions
1 Guard KIT (ACC) 1 Centre Section (5mm High-Strength Steel) 2 Chassis Mounting Brackets 2 Corner Mounting Brackets 2 Corner Guards 1 Air Dam Reinforcement Bracket 4 M6 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 2 M8 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 4 M10 x 25mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 100mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 30mm High Tensile (8.8) Bolts (Zinc Plated) 14 M8 x 25mm High Tensile (8.8) Bolts (Black Zinc Plated) 4 M6 x 40mm High Tensile (10.9) Bolts (Zinc Plated) 4 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 18 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 4 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 x 8mm Bushings (6061 Aluminium) 12 M6 x 25mm Washers (Zinc Plated) 4 M6 Nutserts (Stainless Steel) 1 4g pouch Anti-Seize 1 Installation Instructions OPTIONS -
OFF-ROAD PROTECTIONCritical off-road protection for the Lower Radiator Core, ACC Camera, Windshield Washer Bottle and Air Suspension Controller. Accomplished via numerous sub-frame braces and high-strength steel that is 5mm thick on the main centre section.MAINTAIN OEM APPEARANCEThe lower front fascia can be easily installed over the WK2 LOWER FRONT GUARD, maintaining the great looks of the Jeep Grand Cherokee while driving around town. Then when you're heading off-road, you can easily remove the lower front fascia via (5) 1/4 turn fasteners to reveal the WK2 LOWER FRONT GUARD.LOW INSTALLED WEIGHTOnly 15kg (approx.) when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) - 90kgs (steel).BETTER COOLING PERFORMANCEOur design provides significant air flow to the lower radiator core. This is especially important if you're towing, operating in hot climates or have additional items (off-road lights, etc.) restricting airflow to the radiator core. Considering a large portion of airflow comes up from the road surface, we're often surprised how many competing lower protection products are missing this critical feature.MAXIMUM APPROACH ANGLESince our design doesn't extend past the front of your WK2, the maximum approach angle is retained.CCOMPATIBLE With EXCELLENT FRONT RECOVERY OPTIONSCan be installed with OEM Tow Hooks (if available for your WK2) or Chief Products WK2 Recovery Points & WK2 Recovery Hooks (engineer rated to 4,500kg).EASILY & INEXPENSIVELY REPAIREDBecause we designed the WK2 Lower Front Guard as a set of components, if you damage one part, you can easily and cost effectively replace just that part.LOW COSTSignificantly less expensive than a Bull Bar, especially when you include shipping and installation costs.EASY TO INSTALLWe provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can install this yourself.INDUSTRY LEADING CORROSION PROTECTIONWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.BOLT HEAD PROTECTIONOur Bolt Head Protectors are engineered to keep critical bolt heads protected from off-road obstacles. They feature a slotted design that keys directly into the product with no possibility of spinning or moving when hit off-road.REAL WORLD TESTINGThere aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.TOP QUALITY FINISHING TOUCHESWe include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
-
Bolts into existing mounting points in the frame, no drilling or cutting needed.Fitment confirmed on the following vehicles:2011 Jeep Grand Cherokee - All Models & Limited Editions2012 Jeep Grand Cherokee - All Models & Limited Editions2013 Jeep Grand Cherokee - All Models & Limited Editions2014 Jeep Grand Cherokee - All Models & Limited Editions2015 Jeep Grand Cherokee - All Models & Limited Editions2016 Jeep Grand Cherokee - All Models & Limited Editions2017 Jeep Grand Cherokee - All Models & Limited Editions2018 Jeep Grand Cherokee - All Models & Limited Editions2019 Jeep Grand Cherokee - All Models & Limited Editions2020 Jeep Grand Cherokee - All Models & Limited Editions2021 Jeep Grand Cherokee - All Models & Limited Editions* Fits USA & Export models.** Fitment on Summit & High Altitude (2013-2016) requires permanent removal of the lower front fascia.*** Fitment on Summit & High Altitude (2017-2021) and SRT (all model years) requires permanent removal of the lower front fascia and cutting of the plastic bumper.Fitment unconfirmed on the following vehicles:2018-2020 Jeep Grand Cherokee - TrackhawkFitment confirmed with the following products:Uneek WK2 Grand Cherokee Bash PlateRocky Road Bumper Kits & Winch Mounting Kits (2011 - 2018 WK2s)OEM Tow Hooks (part# 82212095)Product does NOT fit with the following products:Jeep Australia Tow Hook (part# CH8220WKRH or AUSWK14HOOK)Jeep Belly Pan (part# 68089029AC)INSTALLATION INSTRUCTIONS
-
WK2 LOWER FRONT GUARD (Guard KIT)
$46.99 USD
An installation kit for the WK2 LOWER FRONT GUARD. It provides the appropriate centre guard for the WK2 LOWER FRONT GUARD.
An installation kit for the WK2 LOWER FRONT GUARD. It provides the appropriate centre guard for the WK2 LOWER FRONT GUARD.
WK2 LOWER FRONT GUARD (Upper Fascia)
$89.99 USD $114.99 USD
Chief Products WK2 LOWER FRONT GUARD (Upper Fascia) delivers improved styling for all 2013-2021 Jeep Grand Cherokees with a WK2 LOWER FRONT GUARD installed. The 3-piece design ensures easy installation and a low installed weight. Best of all, we're able to deliver this improved styling without negatively effecting vehicle approach angle or any of the vehicle safety systems.
-
Chief Products WK2 LOWER FRONT GUARD (Upper Fascia) delivers improved styling for all 2013-2021 Jeep Grand Cherokees with a WK2 LOWER FRONT GUARD installed. The 3-piece design ensures easy installation and a low installed weight. Best of all, we're able to deliver this improved styling without negatively effecting vehicle approach angle or any of the vehicle safety systems.
FEATURESLOW INSTALLED WEIGHTDURABLE POWDER COAT FINISH (Textured Black)E-COAT (Industry Leading Corrosion Protection)EASY INSTALLATION (Difficulty = 2/10)SPECIFICATIONS2.6kg INSTALLED WEIGHT +4.2° APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with Standard Guard) +2.2° APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with ACC Guard) +10.6° APPROACH ANGLE (Summit & SRT with Standard Guard) +8.6° APPROACH ANGLE (Summit & SRT with ACC Guard) * Approach Angle calculations represent improvement over stock (based on stock tyres, lower front fascia removed and air suspension in STD height). Raising the air suspension or installing larger tyres will increase the approach angle improvements.* REQUIRED *
WK2 LOWER FRONT GUARD (Upper Fascia) cannot be installed without WK2 LOWER FRONT GUARD. The (2) products integrate seamlessly to provide robust protection for the front of your WK2. -
STYLEOur design team paid attention to every facet, so we could deliver a product that looks great from every angle and compliments the lines of your WK2 with a fully integrated appearance.MAXIMUM APPROACH ANGLESince our design doesn't extend past the front of your WK2, the maximum approach angle is retained.COMPATIBLE with ALL VEHICLE SYSTEMSFull compatibility with all vehicle systems (Air Bags, Blind Spot Monitoring, ParkSense Front & Rear Park Assist System, Adaptive Cruise Control, Full-Speed Forward Collision Warning with Active Braking, LaneSense Lane Departure Warning with Lane Keep Assist & Parallel and Perpendicular Park Assist).COMPATIBLE with FRONT RECOVERY POINTSCompatible with Chief Products WK2 Recovery Points & WK2 Recovery Hooks (engineer rated to 4,500kg) as well as OEM Tow Hooks (approximate engineer rating of 2,500kg).MAXIMUM APPROACH ANGLESince our design doesn't extend past the front of your WK2, the maximum approach angle is retained.VEHICLE INTEGRATED DESIGNEngineered from the ground up to integrate seamlessly with your WK2 (Jeep Grand Cherokee 2011-2020) and Chief Products WK2 Lower Front Guard. Providing compatibility with all vehicle safety systems, maximum approach angle, a design that doesn't impede critical air flow to the radiator core (critical for towing & off-road performance) and styling that closely matches the lines of your Jeep.LOW INSTALLED WEIGHTOnly 2.6kg when fully installed.EASY TO INSTALLWe provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can install this yourself.INDUSTRY LEADING CORROSION PROTECTIONWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. This industry-leading process (often only offered by OEMs) ensures full-coverage in hard to reach areas that are often missed by other coating processes. On top of the electrophoretic coating, we apply 80µm of an extremely durable and UV stable powder coat (advanced polyester thermosetting powder). This 2 layer approach ensures maximum corrosion protection for all steel parts.REAL WORLD TESTINGThere aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.TOP QUALITY FINISHING TOUCHESWe include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
-
Requires WK2 LOWER FRONT GUARD. Bolts to existing mounting points, no drilling or cutting required.Fitment confirmed on the following vehicles:2013 Jeep Grand Cherokee - All Models & Limited Editions2014 Jeep Grand Cherokee - All Models & Limited Editions2015 Jeep Grand Cherokee - All Models & Limited Editions2016 Jeep Grand Cherokee - All Models & Limited Editions2017 Jeep Grand Cherokee - All Models & Limited Editions2018 Jeep Grand Cherokee - All Models & Limited Editions2019 Jeep Grand Cherokee - All Models & Limited Editions2020 Jeep Grand Cherokee - All Models & Limited Editions2021 Jeep Grand Cherokee - All Models & Limited Editions* Fits USA & Export models.** Fitment on Summit & High Altitude (2013-2016) requires permanent removal of the lower front fascia.*** Fitment on Summit & High Altitude (2017-2021) and SRT (all model years) requires permanent removal of the lower front fascia and cutting of the plastic bumper.Product does NOT fit on the following vehicles:2011 Jeep Grand Cherokee - All Models & Limited Editions2012 Jeep Grand Cherokee - All Models & Limited Editions* Does not fit (and is not needed) on 2011 & 2012 Jeep Grand Cherokees (due to a different front bumper design).Fitment unconfirmed on the following vehicles:2018-2020 Jeep Grand Cherokee - TrackhawkFitment confirmed with the following products:INSTALLATION INSTRUCTIONS
WK2 NUDGE BAR
$239.99 USD $566.98 USD
Chief Products WK2 Nudge Bar provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel (excellent corrosion and scratch resistance) and features a specially engineered mounting system (built from 20mm high-strength steel) that provides maximum strength without reducing your approach angle. It includes a slotted accessory mounting tab that runs the entire length of the bar (making it extremely easy to mount your accessories). Best of all, we've created a bar that is compatible with the all of your Jeep's safety systems - air bags, adaptive cruise control, forward collision warning, lane departure warning and parking sensors*.
-
Chief Products WK2 Nudge Bar provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel (excellent corrosion and scratch resistance) and features a specially engineered mounting system (built from 20mm high-strength steel) that provides maximum strength without reducing your approach angle. It includes a slotted accessory mounting tab that runs the entire length of the bar (making it extremely easy to mount your accessories). Best of all, we've created a bar that is compatible with the all of your Jeep's safety systems - air bags, adaptive cruise control, forward collision warning, lane departure warning and parking sensors*.
FEATURES304 Stainless Steel (Excellent Corrosion & Scratch Resistance)Bar = Mirror Polished or Durable Powder Coat FinishMounting Arms = E-Coat + Durable Powder Coat FinishEasy Installation (Difficulty = 2/10)SPECIFICATIONS10.6kg Fully Installed Weight (Including Mounting Hardware) 63.5mm Bar Diameter 629mm Mounting Tab Total Length (24.76 inches) 599mm Mounting Tab Slot Length (23.58 inches) 123 Brinell Hardness (Excellent Scratch Resistance) 29.4˚ Approach Angle (lower front fascia removed + standard suspension) 33.3˚ Approach Angle (lower front fascia removed + air suspension OR2) Same As Stock Approach Angle (lower front fascia installed) INCLUDES1 Gloss Black Bar (304 Stainless Steel) 2 Chassis Mounting Arms 4 Chassis Mounting Plates 2 M10 x 60mm Heavy Duty Washers (Black EDP Coating) 4 M10 x 40mm High Tensile (10.9) Bolts (Black Zinc Plated) 4 M10 x 65mm High Tensile (10.9) Bolts (Black Zinc Plated) 8 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M10 Nuts (Zinc Plated) 1 4g pouch Anti-Seize 1 Installation Instructions 1 Mirror Polished Bar (304 Stainless Steel) 2 Chassis Mounting Arms 4 Chassis Mounting Plates 2 M10 x 60mm Heavy Duty Washers (Black EDP Coating) 4 M10 x 40mm High Tensile (10.9) Bolts (Black Zinc Plated) 4 M10 x 65mm High Tensile (10.9) Bolts (Black Zinc Plated) 8 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M10 Nuts (Zinc Plated) 1 4g pouch Anti-Seize 1 Installation Instructions 2 Chassis Mounting Arms 4 Chassis Mounting Plates 2 M10 x 60mm Heavy Duty Washers (Black EDP Coating) 4 M10 x 40mm High Tensile (10.9) Bolts (Black Zinc Plated) 4 M10 x 65mm High Tensile (10.9) Bolts (Black Zinc Plated) 8 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M10 Nuts (Zinc Plated) 1 4g pouch Anti-Seize 1 Installation Instructions OPTIONSMORE INFO*Parking Sensor Compatibility - We provide 95% compatibility (read more). -
Excellent Approach AngleSince our design doesn't extend below the mounting brackets, the approach angle (an important aspect off-road) is significantly better than other nudge bars.
Parking Sensor CompatibilityThrough careful engineering & testing we've delivered a nudge bar that is 95% compatible with the parking sensors on all WK2 models.
High StrengthOur innovative mounting system uses steel tabs on the bottom of each bar to lock the bar securely to (2) 20mm high-strength steel mounting arms. This high-strength design means there will be minimal vibrations for your accessories when you're off-road.
Highly Scratch ResistantBy using 304 Stainless Steel (which has a higher hardness rating than Aluminium) we're able to provide a nudge bar with much better scratch & wear resistance.
Low Installed WeightOnly 10.6kg when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) - 90kgs (steel).
Accommodates Numerous Lighting & Accessory OptionsThe accessory mounting tab is slotted across its entire length, allowing you to install lights or accessories however you choose.
Contoured To FitThe accessory mounting tab is contoured to match the curvature of the WK2 grille, so it integrates perfectly with the front of the WK2.
Compatible With Front Recovery PointsCan be installed with Chief Products WK2 Recovery Hooks & WK2 Recovery Points, (which can be installed on driver & passenger sides and are engineer rated to 4,500kg). Due to mounting restrictions, many nudge bars don't allow you to install any front recovery points with their bar.
Compatible With Adaptive Cruise ControlThrough careful engineering & testing we've delivered a nudge bar that is compatible with the adaptive cruise control system on all WK2 models.
Guards Against Damage During RecoveryThe mounting brackets are designed to stop recovery straps or bow shackles from hitting the bar during an off-road recovery.
Easy To InstallWe provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can easily install this yourself. We've even designed the mounting brackets so they swivel slightly during installation to make things as easy as possible.
Industry Leading Corrosion ProtectionWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.
Mirror Polish That LastsOur mirror polished 304 Stainless Steel keeps looking good for longer. Polished aluminium bars tend to develop a white haze from oxidation that causes them to lose their lustre.
Top Quality Finishing TouchesWe include all the details that matter. Electrophoretic Coating on all mounting plates. High tensile bolts for maximum strength. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great. -
Bolts into existing mounting points in the frame, no drilling or cutting needed. Some models require cutting holes for the Mounting Brackets, (see notes below).WK2 Nudge Bar fits the following vehicles:2011 Jeep Grand Cherokee - All Models & Limited Editions2012 Jeep Grand Cherokee - All Models & Limited Editions2013 Jeep Grand Cherokee - All Models & Limited Editions2014 Jeep Grand Cherokee - All Models & Limited Editions2015 Jeep Grand Cherokee - All Models & Limited Editions2016 Jeep Grand Cherokee - All Models & Limited Editions2017 Jeep Grand Cherokee - All Models & Limited Editions2018 Jeep Grand Cherokee - All Models & Limited Editions2019 Jeep Grand Cherokee - All Models & Limited Editions2020 Jeep Grand Cherokee - All Models & Limited Editions2021 Jeep Grand Cherokee - All Models & Limited Editions
* Fits USA & Export models.** Fitment on most 2016+ Australian & European models requires cutting (2) holes in the grille area of the lower front fascia for the Mounting Brackets to pass through. Instructions are not currently provided for this modification.*** Fitment on Summit, High Altitude, SRT & Trackhawk (including all models with same lower front fascia) requires cutting (2) holes in the grille area of the lower front fascia for the Mounting Brackets. Instructions are not currently provided for this modification.Fitment confirmed with the following products:Does NOT fit with the following products:OEM Tow Hooks (part# 82212095)Jeep Australia Tow Hook (part# CH8220WKRH or AUSWK14HOOK)INSTALLATION INSTRUCTIONS
WK2 NUDGE BAR (BASE)
$209.99 USD $287.99 USD
Chief Products WK2 NUDGE BAR (BASE) provides a great looking bar with clean simple li