N280 ROOF RACK (Mounting Rails)
by: Chief Products
$545.99 USD
Chief Products N280 ROOF RACK (Mounting Rails) act as the framework for our Modular Roof Rack System. Our unique modular approach, enables customers to build the roof rack they want, and easily reconfigure it whenever their needs change. Customers can have one configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). Customers get one roof rack, that can easily adapt to their needs.
Chief Products N280 ROOF RACK (Mounting Rails) act as the framework for our Modular Roof Rack System. Our unique modular approach, enables customers to build the roof rack they want, and easily reconfigure it whenever their needs change. Customers can have one configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). Customers get one roof rack, that can easily adapt to their needs.
Engineering our Mounting Rails as a key roof rack component, provides another important advantage; industry-leading load ratings (150kg dynamic & 460kg static). Our unique engineering approach, utilises a boxed design that resists deformation at any singular point, which helps transfer forces to the strongest points on the vehicle roof. When our Mounting Rails are combined with our Planks and Half-Planks, we're able to deliver a Modular Roof Rack System that provides customers with an unrivalled combination of modularity and strength.
| 8.1kg | INSTALLED WEIGHT |
Related Items
![ROOF RACK (2x Planks) [1146mm]](http://usa.chiefproducts.com.au/cdn/shop/products/Roof_Rack_2_Plank_Kit_1146mm_-_HERO_{width}x.jpg?v=1578957201)
![ROOF RACK (2x Planks) [1146mm]](http://usa.chiefproducts.com.au/cdn/shop/products/Roof_Rack_2_Plank_Kit_1146mm_-_HERO.jpg?v=1578957201)
ROOF RACK (2x Planks) [1146mm]
$199.99 USD
Chief Products ROOF RACK (Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to easily bolt accessories to the Plank at any point along the entire length.
Chief Products ROOF RACK (Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to easily bolt accessories to the Plank at any point along the entire length.
We provide (2) Planks; each measuring 1146mm (45.12") long, 156mm (6.14") wide, and an amazing 25mm (0.98") thin. We utilise a proprietary Aircraft-Grade Aluminium Alloy and an advanced Extrusion Manufacturing Process that allows us to deliver Planks with an extremely high strength-to-weight ratio.
| 1146mm | PLANK LENGTH (45.12 inches) |
| 156mm | PLANK WIDTH (6.14 inches) |
| 25mm | PLANK THICKNESS (0.98 inches) |
| 2.52kg | INSTALLED WEIGHT --> 1 Plank |
ROOF RACK (4x Plank End-Caps)
$29.99 USD
Chief Products ROOF RACK (Plank End-Caps) provide a nice finish to the ends of our Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Plank End-Caps; enough for (2) Planks. They bolt on easily and feature (7) slots.
Chief Products ROOF RACK (Plank End-Caps) provide a nice finish to the ends of our Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Plank End-Caps; enough for (2) Planks. They bolt on easily and feature (7) slots.
ROOF RACK (2x Tie-Down Plates)
$69.99 USD $76.99 USD
Chief Products ROOF RACK (Tie-Down Plates) are engineered to provide multiple ways to secure gear and accessories to your roof rack. They clamp securely between our Planks in a way that allows them to easily locate anywhere along the entire length of the Planks.
Manufactured from Aircraft-Grade Aluminium Alloys and High-Strength Steel, they're extremely strong to meet the high demands they're sure to encounter. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to easily secure any accessories you need. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your roof rack.
Chief Products ROOF RACK (Tie-Down Plates) are engineered to provide multiple ways to secure gear and accessories to your roof rack. They clamp securely between our Planks in a way that allows them to easily locate anywhere along the entire length of the Planks.
Manufactured from Aircraft-Grade Aluminium Alloys and High-Strength Steel, they're extremely strong to meet the high demands they're sure to encounter. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to easily secure any accessories you need. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your roof rack.
| 115mm | TIE-DOWN PLATE LENGTH (4.53 inches) |
| 110mm | TIE-DOWN PLATE WIDTH (4.33 inches) |
| 0.50kg | INSTALLED WEIGHT |
| TIE-DOWN STRAP HOOK on CENTRE SECTION |
| ROPE pass through CENTRE SECTION |
| (2) T-NUT SLOTS --> M8 BOLT into M8 T-NUT (upper location between plates; includes room for bolt pass through) |
| (2) T-NUT SLOTS --> M10 BOLT into M10 T-NUT (upper location between plates; includes room for bolt pass through) |
| (2) T-NUT SLOTS --> M8 BOLT into M8 T-NUT (HEAVY DUTY --> lower location below both plates; includes room for bolt pass through) |
| (2) T-NUT SLOTS --> M10 BOLT into M10 T-NUT (HEAVY DUTY --> lower location below both plates; includes room for bolt pass through) |
| (2) T-NUT SLOTS --> M12 CARRIAGE BOLT into SQUARE HOLE (Lower Plate) (HEAVY DUTY --> up through lower plate) |
| (2) T-NUT SLOTS --> M8, M10 & M12 BOLT pass through both PLATES (nut below lower plate) |
| (2) M8 MOUNTING BOLTS --> REPLACE with LONGER MOUNTING BOLT (using weld nut on lower plate) |
