• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products P375 Roof Rack provides the pinnacle of performance for roof rack systems on the P375 (Ford Ranger, 2011-2021). It delivers industry-leading load ratings (150kg dynamic & 460kg static) and vehicle specific styling in a light-weight, low-profile design. Our Modular Roof Rack System provides an unrivalled amount of configurability. Customers can build the roof rack they want, and easily reconfigure it whenever their needs change. One configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). One roof rack; that can easily adapt to your needs.

  We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to keep the overall installed weight low and accomplish a degree of fit-and-finish you have to see in person to truly appreciate. The smooth top surface, low profile design and hidden fasteners have enabled us to deliver an extremely aerodynamic roof rack. Amazingly, even after thousands of kilometres of off-road driving, you won't hear any creaking or rattling. Best of all, we made it extremely easy to mount accessories - whether you're using t-nuts that slide the entire length of the Planks; or our industry-leading Tie-Down Plates that easily slide and clamp between the Planks. If you're looking for a top-quality place to carry extra gear on your next adventure, there's no doubt we've got you covered.

  FEATURES

  MODULAR DESIGN (Mix-And-Match Components)

  GROUNDBREAKING CONFIGURABILITY (Easily Move & Change Components)

  HIGH-STRENGTH (Industry-Leading Load Ratings)

  TOP-QUALITY MATERIALS (Aircraft-Grade Aluminium Alloys + High-Strength Steel)

  INDUSTRY-LEADING DURABILITY (High-Strength + Corrosion Protection + UV Stable Coatings)

  INDUSTRY-LEADING CORROSION PROTECTION (Special Coatings, Materials & Hardware)

  EASILY MOUNT ACCESSORIES (Adjustable Planks, T-Nuts & Tie-Down Plates)

  PREMIUM ACCESSORIES (Top-Quality, Innovative & 3rd Party Compatibility)

  VEHICLE SPECIFIC STYLING (Mounting Rails & Aero)

  STEALTH (Low Wind Noise + No Creaking/Rattling + Unobstructed Sunroof + Stealth Air Dam)

  TOP QUALITY FASTENERS (Blackened Stainless or High-Tensile + Wedge-Lock Washers)

  FIT & FINISH (Precision Manufacturing + Unrivalled QC Processes)

  EASY INSTALLATION (Difficulty = 2/10)
  SPECIFICATIONS

  100kg	DYNAMIC LOAD RATING (with 2x Half-Planks)
  300kg	STATIC LOAD RATING (with 2x Half-Planks)
  150kg	DYNAMIC LOAD RATING (with 2+ Planks)
  460kg	STATIC LOAD RATING (with 2+ Planks)
  86mm	OVERALL HEIGHT (above roof line)
  25mm	PLANK THICKNESS
  28.34mm	PLATFORM THICKNESS (fully assembled)
  1490mm	FULL PLATFORM LENGTH (fully assembled)
  1246mm	FULL PLATFORM WIDTH (fully assembled)
  10.4kg	INSTALLED WEIGHT --> Bare Bones
  10.4kg	INSTALLED WEIGHT --> Roof Top Text [100-300kg]
  14.3kg	INSTALLED WEIGHT --> Roof Top Text [150-460kg]
  18.2kg	INSTALLED WEIGHT --> Overland
  24.6kg	INSTALLED WEIGHT --> Safari
  29.0kg	INSTALLED WEIGHT --> Apex
  7.1kg	INSTALLED WEIGHT --> ((Build Your Own))

  INCLUDES

  
  

  BARE BONES
  

  1	P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (4x Half-Plank End-Caps)
  1	Installation Instructions

  
  

  ROOF TOP TENT [100-300kg]

  1	P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (4x Half-Plank End-Caps)
  1	Installation Instructions

  
  

  ROOF TOP TENT [150-460kg]

  1	P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Planks) [1146mm]
  1	ROOF RACK (4x Plank End-Caps)
  1	ROOF RACK (Roof Top Tent KIT)
  1	Installation Instructions

  
  

  OVERLAND

  1	P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	ROOF RACK (2x Planks) [1146mm]
  1	ROOF RACK (4x Plank End-Caps)
  1	ROOF RACK (2x Half-Planks) [1146mm]
  1	ROOF RACK (4x Half-Plank End-Caps)
  2	ROOF RACK (2x Tie-Down Plates)
  1	Installation Instructions

  
  

  SAFARI

  1	P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  3	ROOF RACK (2x Planks) [1146mm]
  3	ROOF RACK (4x Plank End-Caps)
  1	Installation Instructions

  
  

  APEX

  1	P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  3	ROOF RACK (2x Planks) [1146mm]
  1	ROOF RACK (Platform Frame) [6 Plank]
  1	Installation Instructions

  
  

  ((BUILD YOUR OWN))

  1	P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails)
  1	ROOF RACK (Stealth Air Dam)
  1	Installation Instructions

  EDITIONS

  
  

  BARE BONES
  

  We start with our Mounting Rails, then we add (2) Half-Planks and (4) Half-Plank End Caps. Super simple. Super strong (industry-leading load ratings for such a simple setup - 100kg dynamic & 300kg static). No non-sense. Want to upgrade to a Safari, Roof Top Tent, Overland or Apex edition? No Problem. Want to run with a simple setup that looks awesome, and works as advertised. This is it!

  
  

  ROOF TOP TENT [100-300kg]

  We've developed (2) editions of our P375 ROOF RACK for roof top tents. Our 100-300kg edition is the simplest and lightest version. Designed for customers that want a simple and easy setup for their roof top tent, and industry-leading load ratings (100kg dynamic & 300kg static). We start with our Mounting Rails, then we add (2) Half-Planks and (4) Half-Plank End-Caps. By using Half-Planks, we're able to keep the installed weight low, and make RTT installation super simple (most RTTs can easily clamp around our Half-Planks). Best of all, it's extremely easy to modify, upgrade or configure (just like every edition).

  
  

  ROOF TOP TENT [150-460kg]

  We've developed (2) editions of our P375 ROOF RACK for roof top tents. Our 150-460kg edition is the strongest version. Designed for customers that want the strongest setup for their roof top tent. We start with our Mounting Rails, then we add (2) Planks and (4) Plank End-Caps. Then we add our Roof Top Tent KIT, to make your RTT installation super easy. By using our standard Planks, we're able to provide industry-leading load ratings (150kg dynamic & 460kg static) in a package that looks great and is super easy to install. Best of all, it's extremely easy to modify, upgrade or configure (just like every edition).

  
  

  OVERLAND

  Our Overland edition is designed to provide maximum functionality when Overlanding. We start with our Mounting Rails, then add (2) Planks, (4) Plank End-Caps, (2) Half-Planks, (4) Half-Plank End-Caps, and finish with (4) Tie-Down Plates. The modular design, allows you to easily configure your roof rack components (Planks, Half-Planks, etc.) to suit the needs of your current adventure. The Tie-Down Plates are designed to be multi-functional. They can accommodate numerous accessories and tie-down strap configurations. This edition delivers industry leading load ratings (150kg dynamic & 460kg static) and a nearly unlimited amount of mounting locations for accessories.

  
  

  SAFARI

  Our Safari edition is all about delivering maximum functionality. We start with our Mounting Rails, then add (6) Planks and (12) End-Caps. The modular design, allows you to easily configure your roof rack components (Planks, Half-Planks, etc.) to suit the needs of your current adventure. This edition delivers industry-leading load ratings (150kg dynamic & 460kg static) and a nearly unlimited amount of mounting locations for accessories.

  
  

  APEX

  The pinnacle of roof rack performance for the P375. We start with our Mounting Rails, then add (6) Planks and our Platform Frame (smooth outside border that looks great, adds strength, and delivers the best aerodynamics possible). This edition delivers industry leading-load ratings (150kg dynamic & 460kg static) along with a nearly unlimited amount of mounting locations for accessories. Best of all, the Apex edition delivers industry-leading features with style (vehicle specific styling, smooth border, smooth top surface, amazing fit-n-finish, and fully hidden fasteners).

  
  

  ((BUILD YOUR OWN))

  Our Modular Roof Rack System allows customers to mix-and-match components to create the exact roof rack system they want. This edition starts with our Mounting Rails, and leaves the rest to you. You can add/change components to any of our roof rack editions, but if you want to build your roof rack from the ground up, this is the place to start.

  ---

  * WARNING *

  FOR MAXIMUM SAFETY DO NOT EXCEED MANUFACTURERS ROOF WEIGHT LIMITS. Our load ratings represent the maximum mechanical forces our roof rack system can withstand before failure. Our load ratings do not address vehicle safety during high-speed manoeuvres, or changes to vehicle dynamics caused by a higher centre of gravity.
  
  

  * CAUTION *

  For maximum safety, loads should be evenly distributed and properly secured to avoid shifting during transport. Before using your roof rack, it is important to familiarise yourself with the proper load securing techniques and be constantly safety oriented. Please note, all of our load ratings are based on an evenly distributed load.
• UNPRECEDENTED CONFIGURABILITY

  Choose how many Planks you want. Position your Planks wherever you want. Move your Planks easily, whenever you want. Choose if you want a frame around the outside. Choose how many Tie-Down Plates you want, and where you want them located. Configure your rack however you want. Numerous options. Numerous configurations.

  
  

  MODULAR DESIGN

  Our modular engineering approach allow us to deliver a roof rack system that can be easily adapted to any situation. It also means you can upgrade-downgrade your roof rack any time your needs require.

  
  

  HIGH-STRENGTH

  All versions deliver industry leading load ratings. These ratings were independently tested and the test results are certified to comply with Australian Standard (AS 1235-2000) as well as international standards (ISO / PAS 11154 : 2009:2006) and (DIN 75302/02: 1991). During independent testing, our roof rack system successfully withstood 330kg of upward force, 600kg of forward force (including a special 20° off-axis test). To achieve our certification we needed to have less than 10mm of movement in our structure at the tested loads, we had 0.17mm!
  
  One of the keys to our industry leading load ratings is our Mounting Rails. Not only do they transfer forces to the strongest points on the vehicle roof, they also utilise a boxed design that resists deformation at any singular point. This unique design element creates a 'mounting system’ that is much stronger than any of our competitors.

  
  

  LOW WEIGHT

  We utilise the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a roof rack system with an extremely high strength-to-weight ratio. This means our roof rack has an extremely low weight, while still being the very strongest on the market.

  
  

  STEALTH

  Chief Products roof racks are engineered to be extremely aerodynamic (smooth top surface, low profile design and hidden fasteners). These unique aerodynamic features make our roof racks extremely quiet for the majority of our customers. However, the more wind you have the more wind noise will increase. For customers that live in high-wind areas or regularly drive at high-speeds (120kmh+) we've developed a Stealth Air Dam (included with every set of Mounting Rails) that significantly reduces the noise caused by high-velocity air flows. Best of all, this wind noise performance improvement is accomplished utilising a product that mounts out-of-sight (ensuring it doesn't inhibit use of your rack, or obscure views out of your sunroof).
  
  Our roof racks deliver an experience with no creaking, no rattling, and very low wind noise. We accomplish these amazing feats through a series of technologically advanced aerodynamic methods, along with some proven old school tech (rubber isolators).

  
  

  LOW PROFILE

  Our roof racks are engineered to sit incredibly low at only 86mm above the roofline. We looked at mounting even closer to the vehicle, but during our real-world testing we found it was helpful to have a slight gap between the roof and the rack, so you can slip a hand underneath the rack to wash your roof.

  
  

  UNOBSTRUCTED VIEWS

  If your vehicle has a Sunroof, our roof rack won’t block your view (position your Planks wherever you want) so you can see and experience the beauty of the nature around you.

  
  

  STYLE

  We poured over every design detail to ensure the P375 Roof Rack would look great from every angle. Function was our primary aim, but we also studied every line and every proportion, paying close attention to how they integrate with the lines of the P375.

  
  

  FIT & FINISH

  We utilise advanced manufacturing techniques to achieve a degree of fit-and-finish you have to see in-person to truly appreciate.

  
  

  SMOOTH TOP SURFACE

  The top of our platform is completely smooth. No bolt heads sticking up, tie-down plates that sit completely flush and fasteners that are hidden from view.

  
  

  EASILY MOUNT ACCESSORIES

  We make it extremely easy to mount your accessories and bring your gear with you. We provide (2) full-length channels in each plank, enabling you to use T-Nuts that slide the entire length of the Planks. Even better, is our industry leading Tie-Down Plates and Anchor Points. They provide numerous mounting options and easily slide and clamp between the Planks.

  
  

  TIE-DOWN PLATES

  One of the primary usability goals for our roof racks, was that you could easily bolt/fasten/tie-down to the rack at almost any location. Our custom engineered Tie-Down Plates deliver on that goal. They clamp securely between the Planks in a way that allows them to easily move and fasten anywhere along the entire length of the Planks. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to fasten/bolt just about any accessory you can find. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your platform.

  
  

  NEARLY UNLIMITED ACCESSORY MOUNTING LOCATIONS

  We provide heaps of mounting locations so you can easily mount accessories anywhere. To achieve that goal, we've engineered Planks you can move wherever you need them. Then we've provided two full-length channels in each Plank for captive T-Nuts, allowing you to bolt/fasten to the Plank at any point along the entire length of the Plank. Finally, for maximum flexibility we've delivered Tie-Down Plates that can easily move and fasten anywhere along the entire length of the Planks.

  
  

  COMPATIBLE WITH MOST ACCESSORIES

  If the accessory uses M6, M8 or M10 bolts for mounting, it will probably work with our roof rack system. If not, one of our upcoming adapter kits should take care of business.

  
  

  INNOVATIVE SUITE OF ACCESSORIES

  Chief Products engineering team has already started work on several innovative accessories to further expand the functionality of our roof rack system. Taking advantage of our ground-up approach and modular design is allowing us to develop roof rack accessories that no one has ever seen before.

  
  

  INDUSTRY LEADING CORROSION PROTECTION

  We utilise aircraft-grade aluminium alloys (highly corrosion resistant) for all of the major components of our roof rack system (with a layer of UV stable highly durable powder coat to provide additional protection). For all of our steel parts we utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts, then we add a layer of UV stable powder coat on top for additional protection. All of the included fasteners are protected as well - black zinc plating, zinc flake coatings, black oxide coatings or sometimes we just choose to use stainless steel fasteners. Our aim is to keep your roof rack looking great for many years to come.

  
  

  EASY TO INSTALL

  Easy bolt-on installation with no drilling. In addition, our bracketry is fully adjustable so it adapts to your roof.

  
  

  TOP QUALITY FINISHING TOUCHES

  We include all the details that matter. High tensile bolts for maximum strength. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening (critical to combat loosening from off-roading vibrations). Anti-Seize for bolted joints that are resistant to seizing (important for a product that sits on your roof fully exposed to the elements). A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
  
  We even include a few details you might not appreciate right away. For instance, if you’re installing lights, we provide channels in our mounting rails to run your wiring, (we even provide small holes for your zip ties, so you can hold your wiring up out of sight).
• Requires drilling (8) holes in the roof gutter to install stainless steel nutserts.
  Fitment confirmed on the following vehicles:

  2011 Ford Ranger

  2012 Ford Ranger

  2013 Ford Ranger

  2014 Ford Ranger

  2015 Ford Ranger

  2016 Ford Ranger

  2017 Ford Ranger

  2018 Ford Ranger

  2019 Ford Ranger

  2020 Ford Ranger

  2021 Ford Ranger
  Compatible with the following products:

  This list is based on customer reports, Chief Products has not confirmed fitment of these products. This list will be updated regularly as customers report their experiences.
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Can I Install This Product Myself?

  Forged In Australia?

  What Warranty Do You Provide?

  Will My Roof Rack Develop Creaks and Rattles?

  WIND NOISE --- Understanding & Addressing Common Causes

  ROOF RACK --- Load Ratings Explained

Chief Products ROOF RACK (Platform Frame) is designed to provide your roof rack with a smooth outside border that looks great, adds strength, and delivers improved aerodynamics. The corners of our Platform Frame are die-cast from a proprietary Aircraft-Grade Aluminium Alloy. The frame rails utilise the same Aircraft-Grade Aluminium Alloy combined with an advanced Extrusion Manufacturing Process. We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a product that is light, strong, highly durable and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.

Chief Products ROOF RACK (Half-Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Half-Plank provides a channel for captive T-Nuts. This feature allows you to easily bolt accessories to the Half-Plank at any point along the entire length.

We provide (2) Half-Planks; each measuring 1146mm (45.12") long, 77mm (3.03") wide and an amazing 25mm (0.98") thin. We utilise a proprietary Aircraft-Grade Aluminium Alloy and an advanced Extrusion Manufacturing Process that allows us to deliver Half-Planks with an extremely high strength-to-weight ratio.

Chief Products ROOF RACK (Half-Plank End-Caps) provide a nice finish to the ends of our Half-Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Half-Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Half-Plank End-Caps; enough for (2) Half-Planks. They bolt on easily and feature (7) slots.

Chief Products ROOF RACK (Adjustable Load Rails) are engineered to be multi-functional; acting as a border, divider, grab handle or high-strength way to secure gear. Using our T-Nuts, they can be easily mounted anywhere on your roof rack. Sideways, crossways, or bridging across multiple Planks. We provide (3) different sizes, so you can combine multiple Load Rails to create the exact configuration you need. Want to change your configuration? Loosen the t-nuts, slide the Load Rails into a new position, and retighten. It's that simple!

We've utilised the latest manufacturing techniques and Aircraft-Grade Aluminium Alloys to deliver a product that is light, strong, highly-durable and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.

Chief Products P375-P703-AM2G-UP-UR ROOF RACK (Aero) delivers enhanced styling and aerodynamic performance. Engineered to reduce wind noise by restricting the amount of high-velocity air flowing through the confined space underneath your roof rack.

Ideal for customers wanting optimum aerodynamic performance in high-wind conditions, cross-wind conditions, or regular high-speed driving. P375-P703-AM2G-UP-UR ROOF RACK (Aero) can be used as a replacement for the ROOF RACK (Stealth Air Dam) or in combination.

* ROOF RACK (Stealth Air Dam) provides excellent performance for most customers and is included with every set of Chief Products Mounting Rails.

Chief Products P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails) act as the framework for our Modular Roof Rack System. Our unique modular approach, enables customers to build the roof rack they want, and easily reconfigure it whenever their needs change. Customers can have one configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). Customers get one roof rack, that can easily adapt to their needs.

Engineering our Mounting Rails as a key roof rack component, provides another important advantage; industry-leading load ratings (150kg dynamic & 460kg static). Our unique engineering approach, utilises a boxed design that resists deformation at any singular point, which helps transfer forces to the strongest points on the vehicle roof. When our Mounting Rails are combined with our Planks and Half-Planks, we're able to deliver a Modular Roof Rack System that provides customers with an unrivalled combination of modularity and strength.