![-- ROOF TOP TENT [100-300kg] --](http://usa.chiefproducts.com.au/cdn/shop/files/WK2-ROOF-RACK-_Roof-Top-Tent_-_100-300kg_-INSTALLED-_Moreton-Beach-Render_-_1800x1200-72-RGB_-WEB-TEMP.jpg?v=1711070657)
![-- ROOF TOP TENT [150-600kg] --](http://usa.chiefproducts.com.au/cdn/shop/files/WK2-ROOF-RACK-_Roof-Top-Tent_-_150-600kg_-INSTALLED-_Moreton-Beach-Render_-_1800x1200-72-RGB_-WEB-TEMP.jpg?v=1711070657)
WK2 ROOF RACK
by: Chief Products
Pre-Order $469.99 USD
Chief Products WK2 Roof Rack provides the pinnacle of performance for roof rack systems on the WK2 (Jeep Grand Cherokee, 2011-2020). It delivers industry-leading load ratings (150kg dynamic & 460kg static) and vehicle specific styling in a light-weight, low-profile design. Our Modular Roof Rack System provides an unrivalled amount of configurability. Customers can build the roof rack they want, and easily reconfigure it whenever their needs change. One configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). One roof rack; that can easily adapt to your needs.
-
Chief Products WK2 Roof Rack provides the pinnacle of performance for roof rack systems on the WK2 (Jeep Grand Cherokee, 2011-2020). It delivers industry-leading load ratings (150kg dynamic & 460kg static) and vehicle specific styling in a light-weight, low-profile design. Our Modular Roof Rack System provides an unrivalled amount of configurability. Customers can build the roof rack they want, and easily reconfigure it whenever their needs change. One configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). One roof rack; that can easily adapt to your needs.
We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to keep the overall installed weight low and accomplish a degree of fit-and-finish you have to see in person to truly appreciate. The smooth top surface, low profile design and hidden fasteners have enabled us to deliver an extremely aerodynamic roof rack. Amazingly, even after thousands of kilometres of off-road driving, you won't hear any creaking or rattling. Best of all, we made it extremely easy to mount accessories - whether you're using t-nuts that slide the entire length of the Planks; or our industry-leading Tie-Down Plates that easily slide and clamp between the Planks. If you're looking for a top-quality place to carry extra gear on your next adventure, there's no doubt we've got you covered.
FEATURESMODULAR DESIGN (Mix-And-Match Components)GROUNDBREAKING CONFIGURABILITY (Easily Move & Change Components)HIGH-STRENGTH (Industry-Leading Load Ratings)TOP-QUALITY MATERIALS (Aircraft-Grade Aluminium Alloys + High-Strength Steel)INDUSTRY-LEADING DURABILITY (High-Strength + Corrosion Protection + UV Stable Coatings)INDUSTRY-LEADING CORROSION PROTECTION (Special Coatings, Materials & Hardware)EASILY MOUNT ACCESSORIES (Adjustable Planks, T-Nuts & Tie-Down Plates)PREMIUM ACCESSORIES (Top-Quality, Innovative & 3rd Party Compatibility)VEHICLE SPECIFIC STYLING (Mounting Rails & Aero)STEALTH (Low Wind Noise + No Creaking/Rattling + Unobstructed Sunroof + Stealth Air Dam)TOP QUALITY FASTENERS (Blackened Stainless or High-Tensile + Wedge-Lock Washers)FIT & FINISH (Precision Manufacturing + Unrivalled QC Processes)EASY INSTALLATION (Difficulty = 2/10)SPECIFICATIONS100kg DYNAMIC LOAD RATING (with 2x Half-Planks) 300kg STATIC LOAD RATING (with 2x Half-Planks) 150kg DYNAMIC LOAD RATING (with 2+ Planks) 600kg STATIC LOAD RATING (with 2+ Planks) 86mm OVERALL HEIGHT (above roof line) 25mm PLANK THICKNESS 28.34mm PLATFORM THICKNESS (fully assembled) 1490mm FULL PLATFORM LENGTH (fully assembled) 1246mm FULL PLATFORM WIDTH (fully assembled) 7.25kg INSTALLED WEIGHT --> Bare Bones 7.25kg INSTALLED WEIGHT --> Roof Top Text [100-300kg] 11.0kg INSTALLED WEIGHT --> Roof Top Text [150-600kg] 14.9kg INSTALLED WEIGHT --> Overland 20.8kg INSTALLED WEIGHT --> Safari 24.6kg INSTALLED WEIGHT --> Apex 4.0kg INSTALLED WEIGHT --> ((Build Your Own)) INCLUDESBARE BONES
1 WK2 ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 1 ROOF RACK (2x Half-Planks) [1146mm] 1 ROOF RACK (4x Half-Plank End-Caps) 1 Installation Instructions ROOF TOP TENT [100-300kg]
1 WK2 ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 1 ROOF RACK (2x Half-Planks) [1146mm] 1 ROOF RACK (4x Half-Plank End-Caps) 1 Installation Instructions ROOF TOP TENT [150-600kg]
1 WK2 ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 1 ROOF RACK (2x Planks) [1146mm] 1 ROOF RACK (4x Plank End-Caps) 1 ROOF RACK (Roof Top Tent KIT) 1 Installation Instructions OVERLAND
SAFARI
1 WK2 ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 3 ROOF RACK (2x Planks) [1146mm] 3 ROOF RACK (4x Plank End-Caps) 1 Installation Instructions APEX
1 WK2 ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 3 ROOF RACK (2x Planks) [1146mm] 1 WK2 ROOF RACK (Platform Frame) 1 Installation Instructions ((BUILD YOUR OWN))
1 WK2 ROOF RACK (Mounting Rails) 1 ROOF RACK (Stealth Air Dam) 1 Installation Instructions EDITIONS* WARNING *
FOR MAXIMUM SAFETY DO NOT EXCEED MANUFACTURERS ROOF WEIGHT LIMITS. Our load ratings represent the maximum mechanical forces our roof rack system can withstand before failure. Our load ratings do not address vehicle safety during high-speed manoeuvres, or changes to vehicle dynamics caused by a higher centre of gravity.
* CAUTION *
For maximum safety, loads should be evenly distributed and properly secured to avoid shifting during transport. Before using your roof rack, it is important to familiarise yourself with the proper load securing techniques and be constantly safety oriented. Please note, all of our load ratings are based on an evenly distributed load. -
UNPRECEDENTED CONFIGURABILITYChoose how many Planks you want. Position your Planks wherever you want. Move your Planks easily, whenever you want. Choose if you want a frame around the outside. Choose how many Tie-Down Plates you want, and where you want them located. Configure your rack however you want. Numerous options. Numerous configurations.
MODULAR DESIGNOur modular engineering approach allow us to deliver a roof rack system that can be easily adapted to any situation. It also means you can upgrade-downgrade your roof rack any time your needs require.
HIGH-STRENGTHAll versions deliver industry leading load ratings (150kg dynamic & 600kg static). These ratings were independently tested and the test results are certified to comply with Australian Standard (AS 1235-2000) as well as international standards (ISO / PAS 11154 : 2009:2006) and (DIN 75302/02: 1991). During independent testing, our roof rack system successfully withstood 330kg of upward force, 600kg of forward force (including a special 20° off-axis test). To achieve our certification we needed to have less than 10mm of movement in our structure at the tested loads, we had 0.17mm!
One of the keys to our industry leading load ratings is our Mounting Rails. Not only do they transfer forces to the strongest points on the WK2 roof, they also utilise a boxed design that resists deformation at any singular point. This unique design element creates a 'mounting system’ that is much stronger than any of our competitors.
LOW WEIGHTWe utilise the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a roof rack system with an extremely high strength-to-weight ratio. This means our roof rack has an extremely low weight, while still being the very strongest on the market.
STEALTHChief Products roof racks are engineered to be extremely aerodynamic (smooth top surface, low profile design and hidden fasteners). These unique aerodynamic features make our roof racks extremely quiet for the majority of our customers. However, the more wind you have the more wind noise will increase. For customers that live in high-wind areas or regularly drive at high-speeds (120kmh+) we've developed a Stealth Air Dam (included with every set of Mounting Rails) that significantly reduces the noise caused by high-velocity air flows. Best of all, this wind noise performance improvement is accomplished utilising a product that mounts out-of-sight (ensuring it doesn't inhibit use of your rack, or obscure views out of your sunroof).
Our roof racks deliver an experience with no creaking, no rattling, and very low wind noise. We accomplish these amazing feats through a series of technologically advanced aerodynamic methods, along with some proven old school tech (rubber isolators).
LOW PROFILEChief Products WK2 Roof Rack sits incredibly low at only 86mm above the roofline. We looked at mounting even closer to the vehicle, but during our real-world testing we found it was helpful to have a slight gap between the roof and the rack, so you can slip a hand underneath the rack to wash your roof.
UNOBSTRUCTED VIEWSIf your WK2 has a Dual-Pane Panoramic Sunroof, our WK2 Roof Rack won’t block your view, so you can see and experience the beauty of the nature around you.
STYLEWe poured over every design detail to ensure the WK2 Roof Rack would look great from every angle. Function was our primary aim, but we also studied every line and every proportion, paying close attention to how they integrate with the lines of the WK2.
FIT & FINISHWe utilise advanced manufacturing techniques to achieve a degree of fit-and-finish you have to see in-person to truly appreciate.
SMOOTH TOP SURFACEThe top of our platform is completely smooth. No bolt heads sticking up, tie-down plates that sit completely flush and fasteners that are hidden from view.
EASILY MOUNT ACCESSORIESWe make it extremely easy to mount your accessories and bring your gear with you. We provide (2) full-length channels in each plank, enabling you to use T-Nuts that slide the entire length of the Planks. Even better, is our industry leading Tie-Down Plates and Anchor Points. They provide numerous mounting options and easily slide and clamp between the Planks.
TIE-DOWN PLATESOne of the primary usability goals for our WK2 Roof Rack, was that you could easily bolt/fasten/tie-down to the rack at almost any location. Our custom engineered Tie-Down Plates deliver on that goal. They clamp securely between the Planks in a way that allows them to easily move and fasten anywhere along the entire length of the Planks. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to fasten/bolt just about any accessory you can find. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your platform.
NEARLY UNLIMITED ACCESSORY MOUNTING LOCATIONSWe provide heaps of mounting locations so you can easily mount accessories anywhere. To achieve that goal, we've engineered Planks you can move wherever you need them. Then we've provided two full-length channels in each Plank for captive T-Nuts, allowing you to bolt/fasten to the Plank at any point along the entire length of the Plank. Finally, for maximum flexibility we've delivered Tie-Down Plates that can easily move and fasten anywhere along the entire length of the Planks.
COMPATIBLE WITH MOST ACCESSORIESIf the accessory uses M6, M8 or M10 bolts for mounting, it will probably work with our roof rack system. If not, one of our upcoming adapter kits should take care of business.
INNOVATIVE SUITE OF ACCESSORIESChief Products engineering team has already started work on several innovative accessories to further expand the functionality of our roof rack system. Taking advantage of our ground-up approach and modular design is allowing us to develop roof rack accessories that no one has ever seen before.
INDUSTRY LEADING CORROSION PROTECTIONWe utilise aircraft-grade aluminium alloys (highly corrosion resistant) for all of the major components of our roof rack system (with a layer of UV stable highly durable powder coat to provide additional protection). For all of our steel parts we utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts, then we add a layer of UV stable powder coat on top for additional protection. All of the included fasteners are protected as well - black zinc plating, zinc flake coatings, black oxide coatings or sometimes we just choose to use stainless steel fasteners. Our aim is to keep your roof rack looking great for many years to come.
EASY TO INSTALLEasy bolt-on installation with no drilling. In addition, our bracketry is fully adjustable so it adapts to your roof (unlike some of our competitors).
TOP QUALITY FINISHING TOUCHESWe include all the details that matter. High tensile bolts for maximum strength. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening (critical to combat loosening from off-roading vibrations). Anti-Seize for bolted joints that are resistant to seizing (important for a product that sits on your roof fully exposed to the elements). A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
We even include a few details you might not appreciate right away. For instance, if you’re installing lights, we provide channels in our mounting rails to run your wiring, (we even provide small holes for your zip ties, so you can hold your wiring up out of sight). -
No drilling or cutting required. Bolts to the roof using the existing roof nutserts provided by Jeep. Removal of OEM plastic roof rails required.Fitment confirmed on the following vehicles:2011 Jeep Grand Cherokee --> All Models & Limited Editions2012 Jeep Grand Cherokee --> All Models & Limited Editions2013 Jeep Grand Cherokee --> All Models & Limited Editions2014 Jeep Grand Cherokee --> All Models & Limited Editions2015 Jeep Grand Cherokee --> All Models & Limited Editions2016 Jeep Grand Cherokee --> All Models & Limited Editions2017 Jeep Grand Cherokee --> All Models & Limited Editions2018 Jeep Grand Cherokee --> All Models & Limited Editions2019 Jeep Grand Cherokee --> All Models & Limited Editions2020 Jeep Grand Cherokee --> All Models & Limited Editions2021 Jeep Grand Cherokee --> All Models & Limited EditionsCompatible with the following products:This list is based on customer reports, Chief Products has not confirmed fitment of these products. This list will be updated regularly as customers report their experiences.
• GOBI - WK2 REAR LADDER *DRIVER SIDE* (SKU: GJGCWK2LAD)INSTALLATION INSTRUCTIONS
- PMPatrick M.Verified ReviewerRated 5 out of 5 stars4 months agoRock solid, modular, looks cool.
The Chief Products roof rack is the fourth roof rack I’ve had for my Jeep and I wish I’d gone this route from the beginning. This is the last roof rack you’ll ever buy, why? Well, because it does everything. It’s light, it’s strong, it’s modular like nobody’s business, and it cuts down on wind noise and increases your gas mileage versus other racks.
Since putting the rack on, I’ve also added the new enhanced wind baffle, and the new roof rack rails and I’m super impressed. The baffle fits right in and cuts the wind noise to a whisper, and the rails are rock solid. I’m a big boy, and I was able to shake my whole Jeep making sure they were on there. I also like the ability to configure these guys into any setup I want.
Believe the hype. I wish I had sooner.
- GGabrielVerified BuyerRated 5 out of 5 stars4 months agoProbably the best roof rack designed for WK2
This product made my day when discovered via some overlanding guy in Alaska. Once I found the webpage, I was surfing into so many accessories designed for this car. I was very impressed by pictures but also by the reviews. Thus, decided to start with the roof tent version...and after a few steps I ended with the full Apex version. This roof rack fits perfectly the car, it is very solid because I had in mind to install my 75kg roof tent, well manufactured and gets a great look of the car. GUYS, you did a very good job. Thank you!
- HAHOSAM A.Verified ReviewerRated 5 out of 5 stars4 months agoOne of the best Roof Rack
Chief Products Rock Rack is the best roof rack you could find for your WK2. Beautiful and modular design, unlimited configurations, variety of compatible attachments. I really like it and recommend it.
- CChrisVerified BuyerRated 5 out of 5 stars1 year agoThey missed nothing
This is a solid build, these guys at cheif products missed no detail. Everything came individually wrapped in bubble wrap. The small parts all came in zipper seal vinyl bags. Not some cheap plastic bags l, but zippered vinyl reusable bags. They even included a work cloth to lay parts and tool on while you work. Granted it's a little small but who does that?? The install takes a little time but is spot on. Some of the areas you really have to work your hands into however if you ever changed a headlight bulb on a 2020 jgc this was easier. As for the road test, it has less road noise then the factory rack with cross bars, however with the air dam installed opening the sunroof all the way did create alot of noise from the air being pushed in to it, other then that great design and look.
Instalation 4 out of 5 stars.
Quality of materials 5 out of 5
Packaging they went overboard with the vinyl parts bages and bubble wrap everywhere l, but we loved it. 5 out of 5 maybe even a 6!
Looks 5 out of 5!
Price for what you get 5 out of 5. And yes you're going to spend a pretty penny but it is worth it!
- SWSteve W.Verified BuyerRated 5 out of 5 stars1 year agoExactly what they say on the box
Full roof rack system.
The entire process took about 3.5 hours to fit, start to finish. Congratulations guys on an amazingly well finished product. Importantly, it fits like a dream and has very little wind noise which is always a concern with roof racks.
I’ll give this one 5 stars!
Related Items
![ROOF RACK (2x Planks) [1146mm]](http://usa.chiefproducts.com.au/cdn/shop/products/Roof_Rack_2_Plank_Kit_1146mm_-_HERO_{width}x.jpg?v=1578957201)
![ROOF RACK (2x Planks) [1146mm]](http://usa.chiefproducts.com.au/cdn/shop/products/Roof_Rack_2_Plank_Kit_1146mm_-_HERO.jpg?v=1578957201)
ROOF RACK (2x Planks) [1146mm]
$199.99 USD
Chief Products ROOF RACK (Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to easily bolt accessories to the Plank at any point along the entire length.
Chief Products ROOF RACK (Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to easily bolt accessories to the Plank at any point along the entire length.
We provide (2) Planks; each measuring 1146mm (45.12") long, 156mm (6.14") wide, and an amazing 25mm (0.98") thin. We utilise a proprietary Aircraft-Grade Aluminium Alloy and an advanced Extrusion Manufacturing Process that allows us to deliver Planks with an extremely high strength-to-weight ratio.
| 1146mm | PLANK LENGTH (45.12 inches) |
| 156mm | PLANK WIDTH (6.14 inches) |
| 25mm | PLANK THICKNESS (0.98 inches) |
| 2.52kg | INSTALLED WEIGHT --> 1 Plank |
WK2 SUMP PROTECTION PLATE
$204.99 USD $389.99 USD
Chief Products WK2 Sump Protection Plate provides critical off-road protection for the underside of your engine. It's made from High-Strength Steel and features a rolled front lip design that is braced against the frame for maximum strength. It delivers recessed rear mounting bolts (impossible to hit off-road) and Slotted Bolt Head Protectors (to protect the front mounting bolts). For serious off-roaders, we're the only company in the world offering a Heavy Duty version (270% stronger than Standard). For WK2 owners with a 5.7L V8, we're the first in the world to offer an Access Panel version for easy servicing of your 5.7L. Best of all, we now offer a Bare Bones Edition at a great price, without sacrificing any of the top-notch quality Chief Products is known for.
-
Chief Products WK2 Sump Protection Plate provides critical off-road protection for the underside of your engine. It's made from High-Strength Steel and features a rolled front lip design that is braced against the frame for maximum strength. It delivers recessed rear mounting bolts (impossible to hit off-road) and Slotted Bolt Head Protectors (to protect the front mounting bolts). For serious off-roaders, we're the only company in the world offering a Heavy Duty version (270% stronger than Standard). For WK2 owners with a 5.7L V8, we're the first company in the world to offer an Access Panel version for easy servicing of the 5.7L. Best of all, we now offer a Bare Bones Edition at a great price, without sacrificing any of the top-notch quality Chief Products is known for.
FEATURESHIGH-STRENGTH STEEL (High Strength To Weight Ratio)SLOTTED BOLT HEAD PROTECTORS (6061 Aluminium)RECESSED REAR MOUNTING BOLTS (Smooth Undercarriage)DURABLE POWDER COAT FINISH (Advanced Polyester Thermosetting Powder)E-COAT (Industry Leading Corrosion Protection)DRAINAGE SLOTSEASY INSTALLATION (Difficulty = 2/10)SPECIFICATIONS10.9kg INSTALLED WEIGHT --> Standard 12.2kg INSTALLED WEIGHT --> Access Panel 17.9kg INSTALLED WEIGHT --> Heavy Duty 10.8kg INSTALLED WEIGHT --> Bare Bones Edition INCLUDESSTANDARD1 Sump Protection Plate - Standard (3mm high-strength steel) 4 M6 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 4 M6 x 40mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 50mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 20mm (4.6) Bolts (Zinc Plated) 4 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 4 M8 x 32mm Washers (Zinc Plated) 2 M8 Nyloc Nuts (Zinc Plated) 2 M8 x 3mm Bushings (Aluminium) 4 M6 Nutserts (Stainless Steel) 1 4g pouch Anti-Seize 1 Installation Instructions HEAVY DUTY1 Sump Protection Plate - Heavy Duty (5mm high-strength steel) 4 M6 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 4 M6 x 40mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 50mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 20mm (4.6) Bolts (Zinc Plated) 4 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 4 M8 x 32mm Washers (Zinc Plated) 2 M8 Nyloc Nuts (Zinc Plated) 2 M8 x 3mm Bushings (Aluminium) 4 M6 Nutserts (Stainless Steel) 1 4g pouch Anti-Seize 1 Installation Instructions ACCESS PANEL1 Sump Protection Plate - Access Panel (3mm high-strength steel) 1 Access Panel (3mm high-strength steel) 4 M6 Chief Products Bolt Head Protectors - Standard (Aluminium 5083) 4 M6 x 25mm High Tensile (10.9) Bolts (Zinc Plated) 4 M6 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 4 M6 x 40mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 50mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 20mm (4.6) Bolts (Zinc Plated) 8 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 4 M8 x 32mm Washers (Zinc Plated) 2 M8 Nyloc Nuts (Zinc Plated) 2 M8 x 3mm Bushings (Aluminium) 4 M6 Nutserts (Stainless Steel) 1 4g pouch Anti-Seize 1 Installation Instructions BARE BONES EDITION1 Sump Protection Plate - Bare Bones Edition (3mm high-strength steel) 4 M6 x 40mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 50mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 20mm (4.6) Bolts (Zinc Plated) 4 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 4 M8 x 32mm Washers (Zinc Plated) 2 M8 Nyloc Nuts (Zinc Plated) 2 M8 x 3mm Bushings (Aluminium) 4 M6 Nutserts (Stainless Steel) 1 4g pouch Anti-Seize 1 Installation Instructions OPTIONS -
High-StrengthAll versions are made from High-Strength Steel and feature a rolled front lip design that is braced against the frame for maximum strength. For those wanting maximum strength we also offer a Heavy Duty version (270% stronger than our Standard version).
Simplified Bushing SystemOur simplified bushing system provides protection from creaking, while simplifying the install process to help reduce installation mistakes by service departments.
Compatible With Mopar Skid PlatesEngineered to integrate perfectly with the Mopar Front Axle Skid Plate. Whether your WK2 came from Jeep with the Off-Road Adventure Pack II or you decided to add the Mopar skid plates afterward, our WK2 Sump Protection Plate is designed to integrate perfectly and provide a smooth undercarriage.
Compatible With Our Entire Product LineAlready own our WK2 Lower Front Guard, WK2 Recovery Hooks, WK2 Recovery Points, WK2 Nudge Bar, WK2 Transmission Protection Plate, WK2 Hidden Winch Mount or WK2 Off-Road Front Bumper? We’ve designed the WK2 Sump Protection Plate to integrate perfectly with all of our products.
Ease Of UseOur Access Panel version makes it extremely easy to service your 5.7L V8 WK2.
Easy To InstallWe provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can easily install this yourself.
Industry Leading Corrosion ProtectionWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.
Bolt Head ProtectionOur Bolt Head Protectors are engineered to keep critical bolt heads protected from off-road obstacles. They feature a slotted design that keys directly into the product with no possibility of spinning or moving when hit off-road.
Real World TestingThere aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.
Top Quality Finishing TouchesWe include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great. -
Bolts into existing mounting points in the frame, no drilling or cutting required. Replaces OEM/Mopar plastic 'Belly Pan, Front' (part# 68037063 - 68091772 - 55079191).WK2 Sump Protection Plate fits the following vehicles:2011 Jeep Grand Cherokee - All Models & Limited Editions2012 Jeep Grand Cherokee - All Models & Limited Editions2013 Jeep Grand Cherokee - All Models & Limited Editions2014 Jeep Grand Cherokee - All Models & Limited Editions2015 Jeep Grand Cherokee - All Models & Limited Editions2016 Jeep Grand Cherokee - All Models & Limited Editions2017 Jeep Grand Cherokee - All Models & Limited Editions2018 Jeep Grand Cherokee - All Models & Limited Editions2019 Jeep Grand Cherokee - All Models & Limited Editions2020 Jeep Grand Cherokee - All Models & Limited Editions2021 Jeep Grand Cherokee - All Models & Limited Editions
* Fits USA & Export models. -
ROOF RACK (4x Plank End-Caps)
$29.99 USD
Chief Products ROOF RACK (Plank End-Caps) provide a nice finish to the ends of our Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Plank End-Caps; enough for (2) Planks. They bolt on easily and feature (7) slots.
Chief Products ROOF RACK (Plank End-Caps) provide a nice finish to the ends of our Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Plank End-Caps; enough for (2) Planks. They bolt on easily and feature (7) slots.
