The Store
We will remember your selection.
ROOF RACK (2x Planks) [1146mm]
$199.99 USD
Chief Products ROOF RACK (Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to easily bolt accessories to the Plank at any point along the entire length.
Chief Products ROOF RACK (Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to easily bolt accessories to the Plank at any point along the entire length.
We provide (2) Planks; each measuring 1146mm (45.12") long, 156mm (6.14") wide, and an amazing 25mm (0.98") thin. We utilise a proprietary Aircraft-Grade Aluminium Alloy and an advanced Extrusion Manufacturing Process that allows us to deliver Planks with an extremely high strength-to-weight ratio.
1146mm | PLANK LENGTH (45.12 inches) |
156mm | PLANK WIDTH (6.14 inches) |
25mm | PLANK THICKNESS (0.98 inches) |
2.52kg | INSTALLED WEIGHT --> 1 Plank |
ROOF RACK (4x Plank End-Caps)
$29.99 USD
Chief Products ROOF RACK (Plank End-Caps) provide a nice finish to the ends of our Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Plank End-Caps; enough for (2) Planks. They bolt on easily and feature (7) slots.
Chief Products ROOF RACK (Plank End-Caps) provide a nice finish to the ends of our Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Plank End-Caps; enough for (2) Planks. They bolt on easily and feature (7) slots.
WK2 LOWER FRONT GUARD
Pre-Order $469.99 USD
Chief Products WK2 LOWER FRONT GUARD is engineered to protect the critical components at the lower front of your WK2 without ruining your Jeep's good looks. Weighing only 15kg (approx.) when fully installed, it provides off-road protection for the Lower Radiator Core, ACC Camera, Windshield Washer Bottle and Air Suspension Controller. It features a centre section made from 5mm high-strength steel for unparalleled strength, while still providing critical airflow to the lower radiator core. Bolted directly to the sub-frame it provides the very best approach angle possible, and our Bolt Head Protectors protect the front mounting bolts from off-road damage. Best of all, we've designed the WK2 LOWER FRONT GUARD so it installs behind the removable lower front fascia, providing full protection off-road while still allowing you to maintain a factory appearance on-road.
-
Chief Products WK2 LOWER FRONT GUARD is engineered to protect the critical components at the lower front of your WK2 without ruining your Jeep's good looks. Weighing only 15kg (approx.) when fully installed, it provides off-road protection for the Lower Radiator Core, ACC Camera, Windshield Washer Bottle and Air Suspension Controller. It features a centre section made from 5mm high-strength steel for unparalleled strength, while still providing critical airflow to the lower radiator core. Bolted directly to the sub-frame it provides the very best approach angle possible, and our Bolt Head Protectors protect the front mounting bolts from off-road damage. Best of all, we've designed the WK2 LOWER FRONT GUARD so it installs behind the removable lower front fascia, providing full protection off-road while still allowing you to maintain a factory appearance on-road.
We've created a modular system of protection products for the WK2, this means our WK2 LOWER FRONT GUARD will integrate perfectly with all of our other products --> WK2 HIDDEN WINCH MOUNT, WK2 SUMP PROTECTION PLATE, WK2 NUDGE BAR, WK2 RECOVERY HOOK and WK2 RECOVERY POINT.
FEATURESHIGH-STRENGTH STEEL (High Strength to Weight Ratio)DURABLE POWDER COAT FINISH (Textured Black)E-COAT (Industry Leading Corrosion Protection)AIRFLOW SLOTSDRAINAGE SLOTSEASY INSTALLATION (Difficulty = 4/10)SPECIFICATIONS14.90kg INSTALLED WEIGHT --> (BASE) + STANDARD GUARD 15.20kg INSTALLED WEIGHT --> (BASE) + ACC GUARD +4.2° APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with STANDARD GUARD) +2.2° APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with ACC GUARD) +10.6° APPROACH ANGLE (Summit & SRT with STANDARD GUARD) +8.6° APPROACH ANGLE (Summit & SRT with ACC GUARD) * Approach Angle calculations represent improvement over stock (based on stock tyres, lower front fascia removed and air suspension in STD height). Raising the air suspension or installing larger tyres will increase the approach angle improvements.INCLUDES
1 Guard KIT (Standard)
1 Centre Section (5mm High-Strength Steel) 2 Chassis Mounting Brackets 2 Corner Mounting Brackets 2 Corner Guards 1 Air Dam Reinforcement Bracket 4 M6 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 2 M8 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 4 M10 x 25mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 100mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 30mm High Tensile (8.8) Bolts (Zinc Plated) 14 M8 x 25mm High Tensile (8.8) Bolts (Black Zinc Plated) 4 M6 x 40mm High Tensile (10.9) Bolts (Zinc Plated) 4 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 18 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 4 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 x 8mm Bushings (6061 Aluminium) 12 M6 x 25mm Washers (Zinc Plated) 4 M6 Nutserts (Stainless Steel) 1 4g pouch Anti-Seize 1 Installation Instructions
1 Guard KIT (ACC) 1 Centre Section (5mm High-Strength Steel) 2 Chassis Mounting Brackets 2 Corner Mounting Brackets 2 Corner Guards 1 Air Dam Reinforcement Bracket 4 M6 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 2 M8 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 4 M10 x 25mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 100mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 30mm High Tensile (8.8) Bolts (Zinc Plated) 14 M8 x 25mm High Tensile (8.8) Bolts (Black Zinc Plated) 4 M6 x 40mm High Tensile (10.9) Bolts (Zinc Plated) 4 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 18 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 4 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 x 8mm Bushings (6061 Aluminium) 12 M6 x 25mm Washers (Zinc Plated) 4 M6 Nutserts (Stainless Steel) 1 4g pouch Anti-Seize 1 Installation Instructions OPTIONS -
OFF-ROAD PROTECTIONCritical off-road protection for the Lower Radiator Core, ACC Camera, Windshield Washer Bottle and Air Suspension Controller. Accomplished via numerous sub-frame braces and high-strength steel that is 5mm thick on the main centre section.MAINTAIN OEM APPEARANCEThe lower front fascia can be easily installed over the WK2 LOWER FRONT GUARD, maintaining the great looks of the Jeep Grand Cherokee while driving around town. Then when you're heading off-road, you can easily remove the lower front fascia via (5) 1/4 turn fasteners to reveal the WK2 LOWER FRONT GUARD.LOW INSTALLED WEIGHTOnly 15kg (approx.) when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) - 90kgs (steel).BETTER COOLING PERFORMANCEOur design provides significant air flow to the lower radiator core. This is especially important if you're towing, operating in hot climates or have additional items (off-road lights, etc.) restricting airflow to the radiator core. Considering a large portion of airflow comes up from the road surface, we're often surprised how many competing lower protection products are missing this critical feature.MAXIMUM APPROACH ANGLESince our design doesn't extend past the front of your WK2, the maximum approach angle is retained.CCOMPATIBLE With EXCELLENT FRONT RECOVERY OPTIONSCan be installed with OEM Tow Hooks (if available for your WK2) or Chief Products WK2 Recovery Points & WK2 Recovery Hooks (engineer rated to 4,500kg).EASILY & INEXPENSIVELY REPAIREDBecause we designed the WK2 Lower Front Guard as a set of components, if you damage one part, you can easily and cost effectively replace just that part.LOW COSTSignificantly less expensive than a Bull Bar, especially when you include shipping and installation costs.EASY TO INSTALLWe provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can install this yourself.INDUSTRY LEADING CORROSION PROTECTIONWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.BOLT HEAD PROTECTIONOur Bolt Head Protectors are engineered to keep critical bolt heads protected from off-road obstacles. They feature a slotted design that keys directly into the product with no possibility of spinning or moving when hit off-road.REAL WORLD TESTINGThere aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.TOP QUALITY FINISHING TOUCHESWe include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
-
Bolts into existing mounting points in the frame, no drilling or cutting needed.Fitment confirmed on the following vehicles:2011 Jeep Grand Cherokee - All Models & Limited Editions2012 Jeep Grand Cherokee - All Models & Limited Editions2013 Jeep Grand Cherokee - All Models & Limited Editions2014 Jeep Grand Cherokee - All Models & Limited Editions2015 Jeep Grand Cherokee - All Models & Limited Editions2016 Jeep Grand Cherokee - All Models & Limited Editions2017 Jeep Grand Cherokee - All Models & Limited Editions2018 Jeep Grand Cherokee - All Models & Limited Editions2019 Jeep Grand Cherokee - All Models & Limited Editions2020 Jeep Grand Cherokee - All Models & Limited Editions2021 Jeep Grand Cherokee - All Models & Limited Editions* Fits USA & Export models.** Fitment on Summit & High Altitude (2013-2016) requires permanent removal of the lower front fascia.*** Fitment on Summit & High Altitude (2017-2021) and SRT (all model years) requires permanent removal of the lower front fascia and cutting of the plastic bumper.Fitment unconfirmed on the following vehicles:2018-2020 Jeep Grand Cherokee - TrackhawkFitment confirmed with the following products:Uneek WK2 Grand Cherokee Bash PlateRocky Road Bumper Kits & Winch Mounting Kits (2011 - 2018 WK2s)OEM Tow Hooks (part# 82212095)Product does NOT fit with the following products:Jeep Australia Tow Hook (part# CH8220WKRH or AUSWK14HOOK)Jeep Belly Pan (part# 68089029AC)INSTALLATION INSTRUCTIONS
-
WK2 LOWER FRONT GUARD (Guard KIT)
$46.99 USD
An installation kit for the WK2 LOWER FRONT GUARD. It provides the appropriate centre guard for the WK2 LOWER FRONT GUARD.
An installation kit for the WK2 LOWER FRONT GUARD. It provides the appropriate centre guard for the WK2 LOWER FRONT GUARD.
WK2 ROCK RAILS (Treads)
$211.99 USD $309.99 USD
Chief Products WK2 ROCK RAIL (Treads) have been specifically designed to add extra styling to your WK2 ROCK RAILS (Apex Edition). The treads utilise a dual layer design that increases step traction and provides maximum visual impact. The lower plate is Aluminium with a durable powder coat finish, providing a highly corrosion resistant layer that looks great. The upper plate is made from high-strength steel with E-Coat corrosion protection and heavy-duty textured black powder coating. Together they provide a great looking and very durable step tread for the WK2 ROCK RAILS.
Chief Products Tread KIT has been specifically designed as a way to add extra styling to the Chief Products WK2 ROCK RAIL (Treads) have been specifically designed to add extra styling to your WK2 ROCK RAILS (Apex Edition). The treads utilise a dual layer design that increases step traction and provides maximum visual impact. The lower plate is Aluminium with a durable powder coat finish, providing a highly corrosion resistant layer that looks great. The upper plate is made from high-strength steel with E-Coat corrosion protection and heavy-duty textured black powder coating. Together they provide a great looking and very durable step tread for the WK2 ROCK RAILS.
WK2 ROOF RACK (Platform Frame)
$339.99 USD
Our WK2 ROOF RACK (Platform Frame) is designed to provide your roof rack with a smooth outside border that looks great, adds strength and delivers improved aerodynamics. The Corners of our Platform Frame are die-cast from a proprietary Aircraft-Grade Aluminium Alloy. The Frame Rails utilise the same Aircraft-Grade Aluminium Alloy, along with an advanced Extrusion Manufacturing Process. We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a product that is light, strong, highly durable, and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.
Our WK2 ROOF RACK (Platform Frame) is designed to provide your roof rack with a smooth outside border that looks great, adds strength and delivers improved aerodynamics. The Corners of our Platform Frame are die-cast from a proprietary Aircraft-Grade Aluminium Alloy. The Frame Rails utilise the same Aircraft-Grade Aluminium Alloy, along with an advanced Extrusion Manufacturing Process. We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a product that is light, strong, highly durable, and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.
1490mm | PLATFORM FRAME LENGTH (58.66 inches) |
1246mm | PLATFORM FRAME WIDTH (49.06 inches) |
28.34mm | PLATFORM FRAME THICKNESS (1.12 inches) |
6.03kg | INSTALLED WEIGHT |
WK2 WINCH CRADLE
$316.99 USD
Chief Products WK2 Winch Cradle provides a high-strength place to mount your winch. It includes critical cooling and drainage holes to ensure your winch stays cool and muddy water drains away. As an added bonus, we include an access hole for users that want to 'clock' their winch. Best of all, we provide (2) versions designed to integrate perfectly with the model year of your WK2.
Chief Products WK2 Winch Cradle provides a high-strength place to mount your winch. It includes critical cooling and drainage holes to ensure your winch stays cool and muddy water drains away. As an added bonus, we include an access hole for users that want to 'clock' their winch. Best of all, we provide (2) versions designed to integrate perfectly with the model year of your WK2.
WK2 NUDGE BAR (BASE)
$209.99 USD $287.99 USD
Chief Products WK2 NUDGE BAR (BASE) provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel and it includes a slotted accessory mounting tab that runs the entire length of the bar, making it extremely easy to mount your accessories. We provide (2) versions, so you can choose the one that best fits the style of your WK2.
Chief Products WK2 NUDGE BAR (BASE) provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel and it includes a slotted accessory mounting tab that runs the entire length of the bar, making it extremely easy to mount your accessories. We provide (2) versions, so you can choose the one that best fits the style of your WK2.
63.5mm | BAR DIAMETER |
629mm | MOUNTING TAB TOTAL LENGTH (24.76 inches) |
599mm | MOUNTING TAB SLOT LENGTH (23.58 inches) |
123 | BRINELL HARDNESS (Excellent Scratch Resistance) |
1 | Bar Assembly (304 Stainless Steel) |
1 | Installation Instructions |
WK2 LOWER FRONT GUARD (Upper Fascia)
$89.99 USD $114.99 USD
Chief Products WK2 LOWER FRONT GUARD (Upper Fascia) delivers improved styling for all 2013-2021 Jeep Grand Cherokees with a WK2 LOWER FRONT GUARD installed. The 3-piece design ensures easy installation and a low installed weight. Best of all, we're able to deliver this improved styling without negatively effecting vehicle approach angle or any of the vehicle safety systems.
-
Chief Products WK2 LOWER FRONT GUARD (Upper Fascia) delivers improved styling for all 2013-2021 Jeep Grand Cherokees with a WK2 LOWER FRONT GUARD installed. The 3-piece design ensures easy installation and a low installed weight. Best of all, we're able to deliver this improved styling without negatively effecting vehicle approach angle or any of the vehicle safety systems.
FEATURESLOW INSTALLED WEIGHTDURABLE POWDER COAT FINISH (Textured Black)E-COAT (Industry Leading Corrosion Protection)EASY INSTALLATION (Difficulty = 2/10)SPECIFICATIONS2.6kg INSTALLED WEIGHT +4.2° APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with Standard Guard) +2.2° APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with ACC Guard) +10.6° APPROACH ANGLE (Summit & SRT with Standard Guard) +8.6° APPROACH ANGLE (Summit & SRT with ACC Guard) * Approach Angle calculations represent improvement over stock (based on stock tyres, lower front fascia removed and air suspension in STD height). Raising the air suspension or installing larger tyres will increase the approach angle improvements.* REQUIRED *
WK2 LOWER FRONT GUARD (Upper Fascia) cannot be installed without WK2 LOWER FRONT GUARD. The (2) products integrate seamlessly to provide robust protection for the front of your WK2. -
STYLEOur design team paid attention to every facet, so we could deliver a product that looks great from every angle and compliments the lines of your WK2 with a fully integrated appearance.MAXIMUM APPROACH ANGLESince our design doesn't extend past the front of your WK2, the maximum approach angle is retained.COMPATIBLE with ALL VEHICLE SYSTEMSFull compatibility with all vehicle systems (Air Bags, Blind Spot Monitoring, ParkSense Front & Rear Park Assist System, Adaptive Cruise Control, Full-Speed Forward Collision Warning with Active Braking, LaneSense Lane Departure Warning with Lane Keep Assist & Parallel and Perpendicular Park Assist).COMPATIBLE with FRONT RECOVERY POINTSCompatible with Chief Products WK2 Recovery Points & WK2 Recovery Hooks (engineer rated to 4,500kg) as well as OEM Tow Hooks (approximate engineer rating of 2,500kg).MAXIMUM APPROACH ANGLESince our design doesn't extend past the front of your WK2, the maximum approach angle is retained.VEHICLE INTEGRATED DESIGNEngineered from the ground up to integrate seamlessly with your WK2 (Jeep Grand Cherokee 2011-2020) and Chief Products WK2 Lower Front Guard. Providing compatibility with all vehicle safety systems, maximum approach angle, a design that doesn't impede critical air flow to the radiator core (critical for towing & off-road performance) and styling that closely matches the lines of your Jeep.LOW INSTALLED WEIGHTOnly 2.6kg when fully installed.EASY TO INSTALLWe provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can install this yourself.INDUSTRY LEADING CORROSION PROTECTIONWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. This industry-leading process (often only offered by OEMs) ensures full-coverage in hard to reach areas that are often missed by other coating processes. On top of the electrophoretic coating, we apply 80µm of an extremely durable and UV stable powder coat (advanced polyester thermosetting powder). This 2 layer approach ensures maximum corrosion protection for all steel parts.REAL WORLD TESTINGThere aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.TOP QUALITY FINISHING TOUCHESWe include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
-
Requires WK2 LOWER FRONT GUARD. Bolts to existing mounting points, no drilling or cutting required.Fitment confirmed on the following vehicles:2013 Jeep Grand Cherokee - All Models & Limited Editions2014 Jeep Grand Cherokee - All Models & Limited Editions2015 Jeep Grand Cherokee - All Models & Limited Editions2016 Jeep Grand Cherokee - All Models & Limited Editions2017 Jeep Grand Cherokee - All Models & Limited Editions2018 Jeep Grand Cherokee - All Models & Limited Editions2019 Jeep Grand Cherokee - All Models & Limited Editions2020 Jeep Grand Cherokee - All Models & Limited Editions2021 Jeep Grand Cherokee - All Models & Limited Editions* Fits USA & Export models.** Fitment on Summit & High Altitude (2013-2016) requires permanent removal of the lower front fascia.*** Fitment on Summit & High Altitude (2017-2021) and SRT (all model years) requires permanent removal of the lower front fascia and cutting of the plastic bumper.Product does NOT fit on the following vehicles:2011 Jeep Grand Cherokee - All Models & Limited Editions2012 Jeep Grand Cherokee - All Models & Limited Editions* Does not fit (and is not needed) on 2011 & 2012 Jeep Grand Cherokees (due to a different front bumper design).Fitment unconfirmed on the following vehicles:2018-2020 Jeep Grand Cherokee - TrackhawkFitment confirmed with the following products:INSTALLATION INSTRUCTIONS
WK2 CHASSIS MOUNTS (Front)
$159.99 USD
Chief Products WK2 Chassis Mounts (Front) provide a secure connection to the front of your WK2 (Jeep Grand Cherokee 2011-2020). Engineered to distribute forces to the chassis of your WK2 over multiple mounting points (for maximum strength and reliability). These Chassis Mounts play a critical role in the Engineer Certified Ratings (10,000lbs WLL) of our WK2 Off-Road Front Bumper and WK2 Hidden Winch Mount. They've been FEA tested, tested by independent 3rd parties (including crash testing for ADR compliance) and real-world tested in numerous scenarios; including off-axis recoveries and snatch block recoveries. In other words, this is a product you can count on when you're stuck in the middle of nowhere and you need it most.
Chief Products WK2 Chassis Mounts (Front) provide a secure connection to the front of your WK2 (Jeep Grand Cherokee 2011-2020). Engineered to distribute forces to the chassis of your WK2 over multiple mounting points (for maximum strength and reliability). These Chassis Mounts play a critical role in the Engineer Certified Ratings (10,000lbs WLL) of our WK2 Off-Road Front Bumper and WK2 Hidden Winch Mount. They've been FEA tested, tested by independent 3rd parties (including crash testing for ADR compliance) and real-world tested in numerous scenarios; including off-axis recoveries and snatch block recoveries. In other words, this is a product you can count on when you're stuck in the middle of nowhere and you need it most.
ROOF RACK (2x Half-Planks) [1146mm]
$135.99 USD
Chief Products ROOF RACK (Half-Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Half-Plank provides a channel for captive T-Nuts. This feature allows you to easily bolt accessories to the Half-Plank at any point along the entire length.
Chief Products ROOF RACK (Half-Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Half-Plank provides a channel for captive T-Nuts. This feature allows you to easily bolt accessories to the Half-Plank at any point along the entire length.
We provide (2) Half-Planks; each measuring 1146mm (45.12") long, 77mm (3.03") wide and an amazing 25mm (0.98") thin. We utilise a proprietary Aircraft-Grade Aluminium Alloy and an advanced Extrusion Manufacturing Process that allows us to deliver Half-Planks with an extremely high strength-to-weight ratio.
1146mm | HALF-PLANK LENGTH (45.12 inches) |
77mm | HALF-PLANK WIDTH (6.14 inches) |
25mm | HALF-PLANK THICKNESS (0.98 inches) |
1.51kg | INSTALLED WEIGHT --> 1 Half-Plank |
WK2 ROOF RACK (Aero)
Pre-Order $169.99 USD
Chief Products WK2 ROOF RACK (Aero) delivers enhanced styling and aerodynamic performance. Engineered to reduce wind noise by restricting the amount of high-velocity air flowing through the confined space underneath your roof rack (diverting high-velocity air up and over your roof rack).
Chief Products WK2 ROOF RACK (Aero) delivers enhanced styling and aerodynamic performance. Engineered to reduce wind noise by restricting the amount of high-velocity air flowing through the confined space underneath your roof rack (diverting high-velocity air up and over your roof rack).
Ideal for customers wanting optimum aerodynamic performance in high-wind conditions, cross-wind conditions, or regular high-speed driving. WK2 ROOF RACK (Aero) can be used as a replacement for the ROOF RACK (Stealth Air Dam) or in combination.
* ROOF RACK (Stealth Air Dam) provides excellent performance for most customers and is included with every set of Chief Products Mounting Rails.
1.2kg | INSTALLED WEIGHT |
ROOF RACK (4x Half-Plank End-Caps)
$25.99 USD
Chief Products ROOF RACK (Half-Plank End-Caps) provide a nice finish to the ends of our Half-Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Half-Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Half-Plank End-Caps; enough for (2) Half-Planks. They bolt on easily and feature (7) slots.
Chief Products ROOF RACK (Half-Plank End-Caps) provide a nice finish to the ends of our Half-Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Half-Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Half-Plank End-Caps; enough for (2) Half-Planks. They bolt on easily and feature (7) slots.
WK2 REAR BUMPER GUARD (Corners)
$439.99 USD $490.99 USD
Chief Products WK2 REAR BUMPER GUARD (Corners) is engineered to bolt-on to the WK2 REAR BUMPER GUARD (Centre) and extend protection to the vulnerable rear corners of your WK2. The clean simple design hugs the lines of the rear bumper to provide maximum protection for the rear of your WK2 without ruining your Jeep’s good looks.
-
Chief Products WK2 REAR BUMPER GUARD (Corners) is engineered to bolt-on to the WK2 REAR BUMPER GUARD (Centre) and extend protection to the vulnerable rear corners of your WK2. The clean simple design hugs the lines of the rear bumper to provide maximum protection for the rear of your WK2 without ruining your Jeep’s good looks.
To ensure the WK2 REAR BUMPER GUARD (Corners) is a top-notch product you can trust, we performed (12) months of real-world testing. Our real-world testing included 1000s of kilometers of on-road and off-road testing, including many extremely difficult off-road challenges. Those epxeriences and passionate attention-to-detail led to numerous refinements that increased ease-of-installation, lowered weight, maximised performance and increased strength.
FEATURESHIGH-STRENGTH STEEL (High Strength to Weight Ratio)DURABLE POWDER COAT FINISH (Textured Black)E-COAT (Industry Leading Corrosion Protection)RECESSED MOUNTING BOLTS (Smooth Undercarriage)EASY INSTALLATION (Difficulty = 5/10)SPECIFICATIONS10.75kg INSTALLED WEIGHT 23.9° DEPARTURE ANGLE (Standard Suspension) 25.9° DEPARTURE ANGLE (Air Suspension OR2) INCLUDES2 Corner Guards 2 Main Mounting Brackets 2 Corner Mounting Brackets 2 Exhaust Support Brackets 4 M10 x 25mm High Tensile (10.9) Bolts (Zinc Plated) 12 M8 x 25mm High Tensile (10.9) Bolts (Zinc Plated) 4 M8 x 16mm High Tensile (10.9) Bolts (Zinc Plated) 4 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 16 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 1 4g pouch Anti-Seize 1 Installation Instructions * REQURIED *
WK2 REAR BUMPER GUARD (Corners) cannot be installed without WK2 REAR BUMPER GUARD (Centre). The (2) products integrate seamlessly to provide robust protection for the rear of your WK2.
* ATTENTION *
This product does not fit 3.0L diesel models with a DEF Tank (North American 3.0L Models). -
High Strength Off-Road ProtectionEngineered and fully tested to provide off-road protection for the vulnerable rear corners of your WK2. Accomplished via high-strength steel braces and boxed sections to provide maximum strength.
Contoured To FitWe designed the WK2 REAR BUMPER GUARD to hug the lines of the rear bumper, so it provides off-road protection while remaining unobtrusive.
Perfect IntegrationEngineered to integrate seamlessly with the WK2 REAR BUMPER GUARD (Centre) and provide robust off-road protection for the rear of your WK2.
Compatible With Rear Parking SensorsUnlike bulky off-road rear bumpers, the WK2 REAR BUMPER GUARD is fully compatible with the rear parking sensors and requires no alteration to the rear parking sensor system.
Compatible With Jeep/Mopar TowbarsDesigned to integrate seamlessly with Jeep-Mopar Towbars (USA & Australian models).
Recessed Mounting BoltsEngineered to deliver a smooth undercarriage and keep bolt heads protected off-road.
Industry Leading Corrosion ProtectionWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.
Real World TestingThere aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.
Top Quality Finishing TouchesWe include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great. -
Requires WK2 REAR BUMPER GUARD (Centre). Bolts into existing mounting points in the frame, no drilling or cutting of OEM parts needed.WK2 Rear Bumper Guard (Corner Protection Kit) fits the following vehicles:2011 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2012 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2013 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2014 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2015 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2016 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2017 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2018 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2019 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2020 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2021 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)Does NOT fit on the following vehicles:2012-2019 Jeep Grand Cherokee - 3.0L Diesel with DEF Tank (USA Models ONLY)2014-2019 Jeep Grand Cherokee - Summit & High Altitude (including all models with same lower rear bumper/fascia)2012-2019 Jeep Grand Cherokee - SRT (including all models with same lower rear bumper/fascia)Fitment confirmed with the following products:MagnaFlow Stainless MF Series Cat-Back Performance ExhaustINSTALLATION INSTRUCTIONS
WK2 ROOF RACK (Mounting Rails)
Pre-Order $469.99 USD
Chief Products WK2 ROOF RACK (Mounting Rails) act as the framework for our Modular Roof Rack System. Our unique modular approach, enables customers to build the roof rack they want, and easily reconfigure it whenever their needs change. Customers can have one configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). Customers get one roof rack, that can easily adapt to their needs.
Chief Products WK2 ROOF RACK (Mounting Rails) act as the framework for our Modular Roof Rack System. Our unique modular approach, enables customers to build the roof rack they want, and easily reconfigure it whenever their needs change. Customers can have one configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). Customers get one roof rack, that can easily adapt to their needs.
Engineering our Mounting Rails as a key roof rack component, provides another important advantage; industry-leading load ratings (150kg dynamic & 600kg static). Our unique engineering approach, utilises a boxed design that resists deformation at any singular point, which helps transfer forces to the strongest points on the vehicle roof. When our Mounting Rails are combined with our Planks and Half-Planks, we're able to deliver a Modular Roof Rack System that provides customers with an unrivalled combination of modularity and strength.
4.0kg | INSTALLED WEIGHT |
WK2 OFF-ROAD FRONT BUMPER (Fusion Fairlead)
$90.99 USD $265.99 USD
WK2 OFF-ROAD FRONT BUMPER (Mach II Aero-Bar)
$201.99 USD $438.99 USD
WK2 OFF-ROAD FRONT BUMPER (Apex Grille)
$263.99 USD $659.99 USD
WK2 OFF-ROAD FRONT BUMPER (Nomad Grille)
$155.99 USD $167.99 USD
WK2 NUDGE BAR (Mounting Arms Upgrade KIT)
$179.99 USD
Chief Products WK2 Nudge Bar (Mounting Arms Upgrade KIT) allows customers with an older WK2 Nudge Bar (purchased before October 2019) to upgrade to the latest Mounting Arms. These new Mounting Arms provide more adjustment, allowing customers to mount their WK2 Nudge Bar closer to (or farther from) the vehicle. Mounting closer to the vehicle can be helpful when having troubles with the parking sensor system. Mounting farther from the vehicle can be helpful when a customer needs more space to mount larger off-road lights.
Chief Products WK2 Nudge Bar (Mounting Arms Upgrade KIT) allows customers with an older WK2 Nudge Bar (purchased before October 2019) to upgrade to the latest Mounting Arms. These new Mounting Arms provide more adjustment, allowing customers to mount their WK2 Nudge Bar closer to (or farther from) the vehicle. Mounting closer to the vehicle can be helpful when having troubles with the parking sensor system. Mounting farther from the vehicle can be helpful when a customer needs more space to mount larger off-road lights.
2 | Chassis Mounting Arms |
4 | Chassis Mounting Plates |
2 | M10 x 60mm Heavy Duty Washers (Black EDP Coating) |
1 | Installation Instructions |