WK2 Transmission Protection Plate
by: Chief Products
Out of Stock Pre-Order $189.99 USD

Chief Products WK2 Transmission Protection Plate provides critical off-road protection for the underside of your transmission. It's manufactured using High-Strength Steel and reinforced boxed edges to provide maximum impact protection. We've designed the WK2 Transmission Protection Plate to be installed on its own or integrate with the Mopar set of skid plates - providing a fully protected and streamlined undercarriage.
-
Chief Products WK2 Transmission Protection Plate provides critical off-road protection for the underside of your transmission. It's manufactured using High-Strength Steel and reinforced boxed edges to provide maximum impact protection. We've designed the WK2 Transmission Protection Plate to be installed on its own or integrate with the Mopar set of skid plates - providing a fully protected and streamlined undercarriage.
The latest version delivers several enhancements. A new mounting system with recessed mounting bolts that are impossible to hit when driving off-road. Less parts for easier installation. Industry leading E-Coat corrosion protection. Optimised slots for increased airflow and drainage. Best of all, the latest version delivers an impressive 40% strength improvement.
FEATURESHIGH-STRENGTH STEEL (High Strength To Weight Ratio)RECESSED REAR MOUNTING BOLTS (Smooth Undercarriage)DURABLE POWDER COAT FINISH (Textured Black)E-COAT (Industry Leading Corrosion Protection)DRAINAGE SLOTSEASY INSTALLATION (Difficulty = 2/10)SPECIFICATIONS6.7kg INSTALLED WEIGHT INCLUDES1 Transmission Protection Plate 3 M8 x 30mm High Tensile (8.8) Bolt (Zinc Plated) 3 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 1 M8 x 3mm Bushings (6061 Aluminium) 1 M8 (CL8) Flanged Nut (Zinc Plated) 1 4g pouch Anti-Seize 1 Installation Instructions -
High StrengthManufactured using High-Strength Steel and reinforced boxed edges for maximum impact protection.
Compatible With Mopar Skid PlatesEngineered from the ground-up to integrate perfectly with the Mopar Front Axle Skid Plate and Mopar Transfer Case Skid Plates. Whether your WK2 came from Jeep with the Off-Road Adventure Pack II or you decided to add the Mopar skid plates afterward, our WK2 Transmission Protection Plate is designed to integrate perfectly and provide a smooth and fully protected undercarriage.
Easy To InstallWe provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can easily install this yourself.
Industry Leading Corrosion ProtectionWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.
Recessed Mounting BoltsAll mounting bolts are recessed to keep critical bolt heads protected from rocks and other off-road obstacles.
Real World TestingThere aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.
Top Quality Finishing TouchesWe include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great. -
Bolts into existing mounting points in the frame, no drilling or cutting needed. Replaces OEM-Mopar plastic 'Belly Pan, Transmission' (part# 05182517).WK2 Transmission Protection Plate fits the following vehicles:2011 Jeep Grand Cherokee - All Models & Limited Editions2012 Jeep Grand Cherokee - All Models & Limited Editions2013 Jeep Grand Cherokee - All Models & Limited Editions2014 Jeep Grand Cherokee - All Models & Limited Editions2015 Jeep Grand Cherokee - All Models & Limited Editions2016 Jeep Grand Cherokee - All Models & Limited Editions2017 Jeep Grand Cherokee - All Models & Limited Editions2018 Jeep Grand Cherokee - All Models & Limited Editions2019 Jeep Grand Cherokee - All Models & Limited Editions2020 Jeep Grand Cherokee - All Models & Limited Editions2021 Jeep Grand Cherokee - All Models & Limited Editions
* Fits USA & Export models.Fitment unconfirmed on the following vehicles:2018-2020 Jeep Grand Cherokee - TrackhawkFitment confirmed with the following products:Mopar 'Front Axle Skid Plate' (part# 82211995 & 82213094)Mopar 'Transfer Case Skid Plate' (part# 82211994)Dom's DEF Protection Plate for diesel WK2sINSTALLATION INSTRUCTIONS
Category: Off-Road Accessories Vehicle Protection
Share:
Customer Reviews
Related Items
WK2 Off-Road Front Bumper
Coming Soon Pre-Order $0.00 USD

Keep me updated
Give us a few of your details and we'll keep you updated on this product.
Notify Me
Give us a few of your details and we'll notify you when this product is available.
-
-- FULL ROOF RACK SYSTEM --
-
-- SAFARI EDITION --
-
-- OVERLAND EDITION --
-
-- BARE BONES EDITION --
-
-- [MOUNTING RAILS ONLY] --
-
-- [PLATFORM ONLY] --
-
-- FULL ROOF RACK SYSTEM + Tie-Down Plates --
-
-- FULL ROOF RACK SYSTEM + Tie-Down Plates --
-
-- SIDE VIEW --
-
-- EYE LEVEL VIEW --
-
-- DETAIL (Full Roof Rack System) --
-
-- DETAIL (Full Roof Rack System) --
-
-- TOP VIEW with GEAR --
-
-- TOP VIEW ANGLED with GEAR --
-
-- FRONT VIEW with GEAR --
-
-- FULL ROOF RACK SYSTEM with GEAR --
-
-- REAR VIEW with GEAR --
-
-- FULL ROOF RACK SYSTEM with GEAR --
-
-- SUNROOF VIEW --
-
-- DETAIL (Tie-Down Plate + Full Roof Rack System) --
-
-- IN USE (Tie-Down Plates + Full Roof Rack System) --
-
-
-- BARE BONES EDITION with GEAR --
-
-- SAFARI EDITION with GEAR --
-
-- SAFARI EDITION with GEAR --
WK2 ROOF RACK
Out of Stock Pre-Order $475.99 USD

Chief Products WK2 Roof Rack provides the pinnacle of performance for roof rack systems on the WK2 (Jeep Grand Cherokee, 2011-2020). It delivers industry leading load ratings (150kg dynamic & 600kg static) in an extremely light weight and low profile design. Most impressively, the modular design provides an unprecedented amount of configurability, allowing you to mix-and-match components to create the exact roof rack system you want.
-
Chief Products WK2 Roof Rack provides the pinnacle of performance for roof rack systems on the WK2 (Jeep Grand Cherokee, 2011-2020). It delivers industry leading load ratings (150kg dynamic & 600kg static) in an extremely light weight and low profile design. Most impressively, the modular design provides an unprecedented amount of configurability, allowing you to mix-and-match components to create the exact roof rack system you want.
We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to keep the overall installed weight low and accomplish a degree of fit-and-finish you have to see in person to truly appreciate. The smooth top surface, low profile design and hidden fasteners has enabled us to deliver an extremely aerodynamic roof rack. Amazingly even after thousands of kilometres of off-road driving, you won't hear any creaking or rattling. Best of all, we made it extremely easy to mount accessories - whether you're using t-nuts that slide the entire length of the Planks; or our industry leading Tie-Down Plates that easily slide and clamp between the Planks. If you're looking for a top-quality place to carry extra gear on your next adventure, there's no doubt we've got you covered.
FEATURESAIRCRAFT-GRADE ALUMINIUM ALLOYS (High Strength to Weight Ratio)DURABLE POWDER COAT FINISH (Advanced Polyester Thermosetting Powder)E-COAT (Industry Leading Corrosion Protection)MODULAR DESIGN (Provides Unprecedented Configurability)SMOOTH TOP SURFACE (Hidden Fasteners & Flush Mount Tie-Down Plates)HIDDEN WIRING (Channels & Zip-Tie Points for Hidden Wiring)SATELLITE RADIO COMPATIBLE (Doesn’t Block Satellite Radio Signals)EASY INSTALLATION (Difficulty = 3/10)SPECIFICATIONS150kg (330lbs) DYNAMIC LOAD RATING [Independently Certified] 600kg (1,322lbs) STATIC LOAD RATING [Independently Certified] 86mm OVERALL HEIGHT (above roof line) 25mm PLANK THICKNESS 28.34mm PLATFORM THICKNESS (fully assembled) 1490mm FULL PLATFORM LENGTH (fully assembled) 1246mm FULL PLATFORM WIDTH (fully assembled) 26.02kg INSTALLED WEIGHT --> Full Roof Rack System 20.5kg INSTALLED WEIGHT --> Safari Edition 21.8kg INSTALLED WEIGHT --> Overland Edition 11.4kg INSTALLED WEIGHT --> Roof Top Tent Edition 9.9kg INSTALLED WEIGHT --> Bare Bones Edition 22kg PRODUCT WEIGHT --> [PLATFORM ONLY] 6.4kg PRODUCT WEIGHT --> [MOUNTING RAILS ONLY] INCLUDES1 [MOUNTING RAILS ONLY] 1 WK2 Roof Rack (Hidden Air Dam) 3 ROOF RACK (2x Plank KIT -- 1146MM) 1 WK2 ROOF RACK (Platform Frame KIT) 1 Installation Instructions 1 [MOUNTING RAILS ONLY] 1 WK2 Roof Rack (Hidden Air Dam) 3 ROOF RACK (2x Plank KIT -- 1146MM) 3 ROOF RACK (4x Plank End-Cap KIT -- Slotted) 1 Installation Instructions 1 [MOUNTING RAILS ONLY] 1 WK2 Roof Rack (Hidden Air Dam) 1 ROOF RACK (2x Plank KIT -- 1146MM) 1 ROOF RACK (4x Plank End-Cap KIT -- Slotted) 1 ROOF RACK (Roof Top Tent KIT) 1 Installation Instructions 1 [MOUNTING RAILS ONLY] 1 WK2 Roof Rack (Hidden Air Dam) 1 ROOF RACK (2x Plank KIT -- 1146MM) 1 ROOF RACK (4x Plank End-Cap KIT -- Slotted) 1 Installation Instructions 3 ROOF RACK (2x Plank KIT -- 1146MM) 1 WK2 ROOF RACK (Platform Frame KIT) 1 Installation Instructions 1 [MOUNTING RAILS ONLY] 1 WK2 Roof Rack (Hidden Air Dam) 1 Installation Instructions EDITIONSThe pinnacle of roof rack performance for the WK2. We start with our Mounting Rails, then add (6) multi-positional Planks and finish with our Platform Frame KIT (providing a smooth outside border that looks great, adds strength and delivers the best aerodynamics possible). This configuration delivers industry leading load ratings (150kg dynamic & 600kg static) along with a nearly unlimited amount of mounting locations for accessories. Best of all, we do it in style with a completely smooth top surface, amazing fit-n-finish and fully hidden fasteners.Our Safari Edition is all about delivering maximum functionality. We start with our Mounting Rails, then add (6) multi-positional Planks and (12) End-Caps (featuring 7 slots just like the traditional Jeep grille). The modular design allows you to easily remove/reposition the Planks to suit the needs of your current adventure. This configuration delivers industry leading load ratings (150kg dynamic & 600kg static) and a nearly unlimited amount of mounting locations for accessories.Our Overland Edition is designed to provide maximum functionality when Overlanding. We start with our Mounting Rails, then add (4) multi-positional Planks, (8) End-Caps (featuring 7 slots just like the traditional Jeep grille), our Roof Top Tent KIT (to make RTT installation super easy) and finish with (4) Tie-Down Plates. The modular design allows you to easily remove/reposition the Planks to suit the needs of your current adventure. The Tie-Down Plates are designed to be multi-functional and can accommodate numerous accessories and tie-down strap configurations. This configuration delivers industry leading load ratings (150kg dynamic & 600kg static) and a nearly unlimited amount of mounting locations for accessories.If you're sleeping on the roof, you want to be sure your roof rack can handle the extra weight. Our RTT Edition provides industry leading load ratings (150kg dynamic & 600kg static) in a package that looks great and is super easy to install. We start with our Mounting Rails, we add (2) multi-positional Planks and (4) End-Caps (featuring 7 slots just like the traditional Jeep grille). Then we add our Roof Top Tent KIT, to make your RTT installation super easy. Best of all, it's extremely easy to modify, upgrade or configure (just like every version of the WK2 Roof Rack).We start with our Mounting Rails, then we add (2) multi-positional Planks and (4) End Caps (featuring 7 slots just like the traditional Jeep grille). Super simple. Super strong (industry leading load ratings - 150kg dynamic & 600kg static). No non-sense. Want to upgrade later to a Safari Edition, RTT Edition or Full Roof Rack System? No Problem. Want to run with a simple setup that looks awesome, and works as advertised. This is it!Our Roof Rack Platform can be bolted anywhere it's needed (trailer, truck bed, etc.). We start with our Platform Frame KIT, then add (6) multi-positional Planks. Designed with hidden fasteners, (2) full length T-Nut slots on each Plank and compatibility with our flush mounted Tie-Down Plates. The modular design delivers maximum configurability in an extremely thin (28.34mm) and light weight (22kg) form factor. This Roof Rack Platform delivers the pinnacle of performance for roof rack systems.These Mounting Rails are one of the keys to our industry leading load ratings, (150kg dynamic & 600kg static). Not only do they transfer forces to the strongest points on the WK2 roof, they also utilise a boxed design that resists deformation at any singular point. This unique design element creates a 'mounting system' that is significantly stronger than any of our competitors.* WARNING *
FOR MAXIMUM SAFETY DO NOT EXCEED MANUFACTURERS ROOF WEIGHT LIMITS. Our load ratings represent the maximum mechanical forces our roof rack system can withstand before failure. Our load ratings do not address vehicle safety during high-speed manoeuvres, or changes to vehicle dynamics caused by a higher centre of gravity.
* CAUTION *
For maximum safety, loads should be evenly distributed and properly secured to avoid shifting during transport. Before using your roof rack, it is important to familiarise yourself with the proper load securing techniques and be constantly safety oriented. Please note, all of our load ratings are based on an evenly distributed load. -
UNPRECEDENTED CONFIGURABILITYChoose how many Planks you want. Position your Planks wherever you want. Move your Planks easily, whenever you want. Choose if you want a frame around the outside. Choose how many Tie-Down Plates you want, and where you want them located. Configure your rack however you want. Numerous options. Numerous configurations.
MODULAR DESIGNOur modular engineering approach allow us to deliver a roof rack system that can be easily adapted to any situation. It also means you can upgrade-downgrade your roof rack any time your needs require.
HIGH-STRENGTHAll versions deliver industry leading load ratings (150kg dynamic & 600kg static). These ratings were independently tested and the test results are certified to comply with Australian Standard (AS 1235-2000) as well as international standards (ISO / PAS 11154 : 2009:2006) and (DIN 75302/02: 1991). During independent testing, our roof rack system successfully withstood 330kg of upward force, 600kg of forward force (including a special 20° off-axis test). To achieve our certification we needed to have less than 10mm of movement in our structure at the tested loads, we had 0.17mm!
One of the keys to our industry leading load ratings is our Mounting Rails. Not only do they transfer forces to the strongest points on the WK2 roof, they also utilise a boxed design that resists deformation at any singular point. This unique design element creates a 'mounting system’ that is much stronger than any of our competitors.
LOW WEIGHTWe utilise the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a roof rack system with an extremely high strength-to-weight ratio. This means our roof rack has an extremely low weight, while still being the very strongest on the market.
STEALTHOur WK2 Roof Rack is extremely aerodynamic (smooth top surface, low profile design and hidden fasteners) making it nearly silent right out of the box for most customers. If you regularly drive at high-speeds (120kmh+) or live in an area with high winds, wind noise can be a problem. For those customers, we include our Hidden Air Dam (that mounts out-of-sight underneath the rack) to significantly reduce wind noise by restricting the amount of air that flows through the confined space under the rack. No creaking, no rattling and very low wind noise. We accomplish these amazing feats through a series of technologically advanced aerodynamic methods, along with some proven old school tech (rubber isolators).
LOW PROFILEChief Products WK2 Roof Rack sits incredibly low at only 86mm above the roofline. We looked at mounting even closer to the vehicle, but during our real-world testing we found it was helpful to have a slight gap between the roof and the rack, so you can slip a hand underneath the rack to wash your roof.
UNOBSTRUCTED VIEWSIf your WK2 has a Dual-Pane Panoramic Sunroof, our WK2 Roof Rack won’t block your view, so you can see and experience the beauty of the nature around you.
STYLEWe poured over every design detail to ensure the WK2 Roof Rack would look great from every angle. Function was our primary aim, but we also studied every line and every proportion, paying close attention to how they integrate with the lines of the WK2.
FIT & FINISHWe utilise advanced manufacturing techniques to achieve a degree of fit-and-finish you have to see in-person to truly appreciate.
SMOOTH TOP SURFACEThe top of our platform is completely smooth. No bolt heads sticking up, tie-down plates that sit completely flush and fasteners that are hidden from view.
EASILY MOUNT ACCESSORIESWe make it extremely easy to mount your accessories and bring your gear with you. We provide (2) full-length channels in each plank, enabling you to use T-Nuts that slide the entire length of the Planks. Even better, is our industry leading Tie-Down Plates and Anchor Points. They provide numerous mounting options and easily slide and clamp between the Planks.
TIE-DOWN PLATESOne of the primary usability goals for our WK2 Roof Rack, was that you could easily bolt/fasten/tie-down to the rack at almost any location. Our custom engineered Tie-Down Plates deliver on that goal. They clamp securely between the Planks in a way that allows them to easily move and fasten anywhere along the entire length of the Planks. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to fasten/bolt just about any accessory you can find. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your platform.
NEARLY UNLIMITED ACCESSORY MOUNTING LOCATIONSWe provide heaps of mounting locations so you can easily mount accessories anywhere. To achieve that goal, we've engineered Planks you can move wherever you need them. Then we've provided two full-length channels in each Plank for captive T-Nuts, allowing you to bolt/fasten to the Plank at any point along the entire length of the Plank. Finally, for maximum flexibility we've delivered Tie-Down Plates that can easily move and fasten anywhere along the entire length of the Planks.
COMPATIBLE WITH MOST ACCESSORIESIf the accessory uses M6, M8 or M10 bolts for mounting, it will probably work with our roof rack system. If not, one of our upcoming adapter kits should take care of business.
INNOVATIVE SUITE OF ACCESSORIESChief Products engineering team has already started work on several innovative accessories to further expand the functionality of our roof rack system. Taking advantage of our ground-up approach and modular design is allowing us to develop roof rack accessories that no one has ever seen before.
INDUSTRY LEADING CORROSION PROTECTIONWe utilise aircraft-grade aluminium alloys (highly corrosion resistant) for all of the major components of our roof rack system (with a layer of UV stable highly durable powder coat to provide additional protection). For all of our steel parts we utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts, then we add a layer of UV stable powder coat on top for additional protection. All of the included fasteners are protected as well - black zinc plating, zinc flake coatings, black oxide coatings or sometimes we just choose to use stainless steel fasteners. Our aim is to keep your roof rack looking great for many years to come.
EASY TO INSTALLEasy bolt-on installation with no drilling. In addition, our bracketry is fully adjustable so it adapts to your roof (unlike some of our competitors).
TOP QUALITY FINISHING TOUCHESWe include all the details that matter. High tensile bolts for maximum strength. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening (critical to combat loosening from off-roading vibrations). Anti-Seize for bolted joints that are resistant to seizing (important for a product that sits on your roof fully exposed to the elements). A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
We even include a few details you might not appreciate right away. For instance, if you’re installing lights, we provide channels in our mounting rails to run your wiring, (we even provide small holes for your zip ties, so you can hold your wiring up out of sight). -
Bolts to the roof using the existing roof nutserts provided by Jeep, no drilling or cutting required. Removal of the OEM plastic roof rails is required.WK2 Roof Rack fits the following vehicles:2011 Jeep Grand Cherokee - All Models & Limited Editions2012 Jeep Grand Cherokee - All Models & Limited Editions2013 Jeep Grand Cherokee - All Models & Limited Editions2014 Jeep Grand Cherokee - All Models & Limited Editions2015 Jeep Grand Cherokee - All Models & Limited Editions2016 Jeep Grand Cherokee - All Models & Limited Editions2017 Jeep Grand Cherokee - All Models & Limited Editions2018 Jeep Grand Cherokee - All Models & Limited Editions2019 Jeep Grand Cherokee - All Models & Limited Editions2020 Jeep Grand Cherokee - All Models & Limited Editions2021 Jeep Grand Cherokee - All Models & Limited Editions
* Fits USA & Export models.WK2 Roof Rack is compatible with the following products:This list is based on customer reports, Chief Products has not confirmed fitment of these products. This list will be updated regularly as customers report their experiences.
• GOBI - WK2 REAR LADDER *DRIVER SIDE* (SKU: GJGCWK2LAD)INSTALLATION INSTRUCTIONS -
ROOF RACK KITS
Keep me updated
Give us a few of your details and we'll keep you updated on this product.
Notify Me
Give us a few of your details and we'll notify you when this product is available.
-
WK2 Rock Rails (Trek Eleven)
-
-- INSTALLED (Trek Eleven) --
-
WK2 Rock Rails (Safari Three)
-
-- INSTALLED (Safari Three) --
-
WK2 Rock Rails [No Tread]
-
-- INSTALLED [No Tread] --
-
WK2 Rock Rails (Bare Bones Edition)
-
-- INSTALLED (Bare Bones Edition) --
-
OFF-ROAD (Trek Eleven)
-
OFF-ROAD (Trek Eleven)
-
OFF-ROAD (Bare Bones Edition)
-
-- DETAIL (smooth boat bottom design) --
-
-- DETAIL (Trek Eleven + Door Entry) --
-
-- DETAIL (Bare Bones Edition + Door Entry) --
-
-- DETAIL (Jack Points) --
-
-- multiple products shown --
-
-- multiple products shown --
-
-- multiple products shown --
WK2 Rock Rails
Out of Stock Pre-Order $999.99 USD

Chief Products WK2 Rock Rails deliver critical off-road protection for your WK2. The fully integrated design compliments your Jeep's good looks while also providing maximum off-road clearance. To deliver improved rigidity and better impact force distribution than any of our competitors, we utilise high-strength steel and (27) body connections (per rock rail). The smooth ‘boat bottom’ design protects key underbody elements while ensuring you can easily slide over off-road obstacles. Our NO TREAD, TREK ELEVEN and SAFARI THREE editions provide a rigid step that has been optimised to keep obstacles away from the sides of your WK2, while also providing easy entry (or convenient access to your roof rack). Our industry-first system of clamping plates and flush mounted bolts delivers unparalleled ease of installation, while also ensuring everything looks great when you open the doors. Best of all, to ensure you’ve got the best looking WK2 on the trails, we provide (2) tread plate options that allow you to stylise your WK2 Rock Rails however you choose.
-
Chief Products WK2 Rock Rails deliver critical off-road protection for your WK2. The fully integrated design compliments your Jeep's good looks while also providing maximum off-road clearance. To deliver improved rigidity and better impact force distribution than any of our competitors, we utilise high-strength steel and (27) body connections (per rock rail). The smooth ‘boat bottom’ design protects key underbody elements while ensuring you can easily slide over off-road obstacles. Our NO TREAD, TREK ELEVEN and SAFARI THREE editions provide a rigid step that has been optimised to keep obstacles away from the sides of your WK2, while also providing easy entry (or convenient access to your roof rack). Our industry-first system of clamping plates and flush mounted bolts delivers unparalleled ease of installation, while also ensuring everything looks great when you open the doors. Best of all, to ensure you’ve got the best looking WK2 on the trails, we provide (2) tread plate options that allow you to stylise your WK2 Rock Rails however you choose.
Our Bare Bones Edition removes the step (and tread plates) to deliver streamlined off-road protection. Tucked in close to the body (replacing the OEM plastic rocker panels) you can hardly tell they're there, but they still provide industry leading off-road protection, smooth 'boat bottom' design and easy installation. They’re perfect for anyone looking for a purpose built protection option for their WK2.
FEATURESFULLY INTEGRATED DESIGN (Replaces OEM Plastic Rocker Panels)SMOOTH 'BOAT BOTTOM' DESIGN (Fully Hidden & Recessed Fasteners)(2) TREAD PLATE OPTIONS (Trek Eleven & Safari Three)HIGH-STRENGTH STEEL (High Strength To Weight Ratio)(4) JACK POINTS (Reinforced Square Openings Underside Rock Rail - Front & Rear)DURABLE POWDER COAT FINISH (Advanced Polyester Thermosetting Powder)E-COAT (Industry Leading Corrosion Protection)EASY INSTALLATION (Difficulty = 3/10)SPECIFICATIONS43.9kg INSTALLED WEIGHT --> Trek Eleven 43.8kg INSTALLED WEIGHT --> Safari Three 40.3kg INSTALLED WEIGHT --> NO TREAD 29.8kg INSTALLED WEIGHT --> Bare Bones Edition INCLUDES2 Rock Rails with Heavy-Duty Side Pipe (Drivers & Passengers) 2 Clamping Rails (Drivers & Passengers) 2 Clamping Plates (Drivers & Passengers) 2 Tread Pattern - Trek Eleven (6061 Aluminium + Silver Akzo Powder Coating) 2 Step Tread - Trek Eleven (E-Coat + Textured Black Powder Coating) 4 Lower Fastenting Plates (E-Coat) 12 Chief Products Body Insert Nuts (E-Coat) 22 M6 x 16mm (8.8) Counter Sunk Head Bolts (Zinc Plated) 22 M6 x 10mm (8.8) Counter Sunk Head Bolts (Black Zinc Plated) 8 M6 x 25mm (10.9) Bolts (Zinc Plated) 12 M10 x 40mm (10.9) Bolts (Zinc Plated) 12 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 8 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 8 M6 U-Nuts (Zinc Plated) 8 M8 (CL8) Flange Nuts (Zinc Plated) 1 4g pouch Anti-Seize 1 Installation Instructions 2 Rock Rails with Heavy-Duty Side Pipe (Drivers & Passengers) 2 Clamping Rails (Drivers & Passengers) 2 Clamping Plates (Drivers & Passengers) 2 Tread Pattern - Safari Three (6061 Aluminium + Silver Akzo Powder Coating) 2 Step Tread - Safari Three (E-Coat + Textured Black Powder Coating) 4 Lower Fastenting Plates (E-Coat) 12 Chief Products Body Insert Nuts (E-Coat) 22 M6 x 16mm (8.8) Counter Sunk Head Bolts (Zinc Plated) 22 M6 x 10mm (8.8) Counter Sunk Head Bolts (Black Zinc Plated) 8 M6 x 25mm (10.9) Bolts (Zinc Plated) 12 M10 x 40mm (10.9) Bolts (Zinc Plated) 12 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 8 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 8 M6 U-Nuts (Zinc Plated) 8 M8 (CL8) Flange Nuts (Zinc Plated) 1 4g pouch Anti-Seize 1 Installation Instructions 2 Rock Rails with Heavy-Duty Side Pipe (Drivers & Passengers) 2 Clamping Rails (Drivers & Passengers) 2 Clamping Plates (Drivers & Passengers) 2 Spacer Plates (Drivers & Passengers) 4 Lower Fastenting Plates (E-Coat) 12 Chief Products Body Insert Nuts (E-Coat) 22 M6 x 16mm (8.8) Counter Sunk Head Bolts (Zinc Plated) 22 M6 x 10mm (8.8) Counter Sunk Head Bolts (Black Zinc Plated) 8 M6 x 25mm (10.9) Bolts (Zinc Plated) 12 M10 x 40mm (10.9) Bolts (Zinc Plated) 12 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 8 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 8 M6 U-Nuts (Zinc Plated) 8 M8 (CL8) Flange Nuts (Zinc Plated) 1 4g pouch Anti-Seize 1 Installation Instructions 2 Rock Rails (Drivers & Passengers) 2 Clamping Rails (Drivers & Passengers) 2 Clamping Plates (Drivers & Passengers) 2 Spacer Plates (Drivers & Passengers) 4 Lower Fastenting Plates (E-Coat) 12 Chief Products Body Insert Nuts (E-Coat) 22 M6 x 16mm (8.8) Counter Sunk Head Bolts (Zinc Plated) 22 M6 x 10mm (8.8) Counter Sunk Head Bolts (Black Zinc Plated) 8 M6 x 25mm (10.9) Bolts (Zinc Plated) 12 M10 x 40mm (10.9) Bolts (Zinc Plated) 12 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 8 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 8 M6 U-Nuts (Zinc Plated) 1 4g pouch Anti-Seize 1 Installation Instructions OPTIONSWK2 Rock Rails with TREK ELEVEN tread plates.WK2 Rock Rails with SAFARI THREE tread plates.WK2 Rock Rails with no tread plates.WK2 Rock Rails with no tread plates and no step.MORE INFOEASY TO UPGRADE - You can easily upgrade WK2 Rock Rails (NO TREAD) at any time by adding - WK2 Rock Rails (Tread KIT). -
Off-Road ProtectionProvides off-road protection for the rocker panels and lower doors of your WK2. Our design also provides protection for the body seam and wiring loom that run along the underside of your WK2.
High-StrengthMade from High-Strength Steel with a design that incorporates more body connections than our competitors to improve rigidity and provide significantly better impact force distribution. Through FEA computer modelling and (8) months of real world testing we've delivered high-strength rock rails that you can rely on when you need them most.
Great StyleOur design team paid attention to every line, so we could deliver rock rails that compliment the lines of your WK2 with a fully integrated appearance. Open the doors and you immediately notice the attention-to-detail with our streamlined design and flush mounting bolts. Best of all, we provide (2) tread plate options so you can stylise your WK2 Rock Rails however you choose. The dual layer design of the tread plates utilises a silver lower plate that looks great and provides an instant wow factor.
ConvenienceThe steps have been optimised to keep obstacles away from the sides of your WK2, while also providing easy entry (or convenient access to your roof rack). Through real-world testing we ensured you could easily step out over the steps without hitting your leg. We even tested our tread plates to ensure small feet (or paws) wouldn't have troubles with the openings in the tread plates.
Maintains Off-Road ClearanceSince our design replaces the OEM plastic rocker panels, (rather than bolting below) it maintains maximum off-road clearance.
Jack PointsWe supply (1) reinforced jack point (front & rear) on the underside of each rock rail, for a total of (4) high-strength jack points. The small square openings allow drainage and are reinforced to support the entire weight of the vehicle.
Smooth 'Boat Bottom' DesignOur smooth 'Boat Bottom' design ensures that you can easily slide over off-road obstacles. There's nothing to get caught on off-road and all of the mounting bolts are tucked away and protected.
Easy To InstallMany rock rails for the WK2 are very difficult to install. Some can take up to (8) hours, while others require drilling and numerous nutsert installs. As a point of difference, our engineering team has delivered an install process that is extremely easy. We provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can install this yourself.
Industry Leading Corrosion ProtectionWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.
Real World TestingThere aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.
Top Quality Finishing TouchesWe include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great. -
Bolts into existing mounting points in the frame, no drilling or cutting required. Replaces OEM plastic rocker panels.WK2 Rock Rails fit the following vehicles:2011 Jeep Grand Cherokee - All Models & Limited Editions2012 Jeep Grand Cherokee - All Models & Limited Editions2013 Jeep Grand Cherokee - All Models & Limited Editions2014 Jeep Grand Cherokee - All Models & Limited Editions2015 Jeep Grand Cherokee - All Models & Limited Editions2016 Jeep Grand Cherokee - All Models & Limited Editions2017 Jeep Grand Cherokee - All Models & Limited Editions2018 Jeep Grand Cherokee - All Models & Limited Editions2019 Jeep Grand Cherokee - All Models & Limited Editions2020 Jeep Grand Cherokee - All Models & Limited Editions2021 Jeep Grand Cherokee - All Models & Limited Editions
* Fits USA & Export models.** The OEM fender flares on Summit, High Altitude, SRT & Trackhawk extend further into the wheel wells than other WK2 models. We've chosen not to extend our WK2 Rock Rails to match these flares because it would limit the ability to install larger tyres.INSTALLATION INSTRUCTIONS -
Keep me updated
Give us a few of your details and we'll keep you updated on this product.
Notify Me
Give us a few of your details and we'll notify you when this product is available.
Keep me updated
Give us a few of your details and we'll keep you updated on this product.
Notify Me
Give us a few of your details and we'll notify you when this product is available.