WK2 REAR BUMPER GUARD (Corners)
by: Chief Products
$439.99 USD $490.99 USD
Chief Products WK2 REAR BUMPER GUARD (Corners) is engineered to bolt-on to the WK2 REAR BUMPER GUARD (Centre) and extend protection to the vulnerable rear corners of your WK2. The clean simple design hugs the lines of the rear bumper to provide maximum protection for the rear of your WK2 without ruining your Jeep’s good looks.
-
Chief Products WK2 REAR BUMPER GUARD (Corners) is engineered to bolt-on to the WK2 REAR BUMPER GUARD (Centre) and extend protection to the vulnerable rear corners of your WK2. The clean simple design hugs the lines of the rear bumper to provide maximum protection for the rear of your WK2 without ruining your Jeep’s good looks.
To ensure the WK2 REAR BUMPER GUARD (Corners) is a top-notch product you can trust, we performed (12) months of real-world testing. Our real-world testing included 1000s of kilometers of on-road and off-road testing, including many extremely difficult off-road challenges. Those epxeriences and passionate attention-to-detail led to numerous refinements that increased ease-of-installation, lowered weight, maximised performance and increased strength.
FEATURESHIGH-STRENGTH STEEL (High Strength to Weight Ratio)DURABLE POWDER COAT FINISH (Textured Black)E-COAT (Industry Leading Corrosion Protection)RECESSED MOUNTING BOLTS (Smooth Undercarriage)EASY INSTALLATION (Difficulty = 5/10)SPECIFICATIONS10.75kg INSTALLED WEIGHT 23.9° DEPARTURE ANGLE (Standard Suspension) 25.9° DEPARTURE ANGLE (Air Suspension OR2) INCLUDES2 Corner Guards 2 Main Mounting Brackets 2 Corner Mounting Brackets 2 Exhaust Support Brackets 4 M10 x 25mm High Tensile (10.9) Bolts (Zinc Plated) 12 M8 x 25mm High Tensile (10.9) Bolts (Zinc Plated) 4 M8 x 16mm High Tensile (10.9) Bolts (Zinc Plated) 4 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 16 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 1 4g pouch Anti-Seize 1 Installation Instructions * REQURIED *
WK2 REAR BUMPER GUARD (Corners) cannot be installed without WK2 REAR BUMPER GUARD (Centre). The (2) products integrate seamlessly to provide robust protection for the rear of your WK2.
* ATTENTION *
This product does not fit 3.0L diesel models with a DEF Tank (North American 3.0L Models). -
High Strength Off-Road ProtectionEngineered and fully tested to provide off-road protection for the vulnerable rear corners of your WK2. Accomplished via high-strength steel braces and boxed sections to provide maximum strength.
Contoured To FitWe designed the WK2 REAR BUMPER GUARD to hug the lines of the rear bumper, so it provides off-road protection while remaining unobtrusive.
Perfect IntegrationEngineered to integrate seamlessly with the WK2 REAR BUMPER GUARD (Centre) and provide robust off-road protection for the rear of your WK2.
Compatible With Rear Parking SensorsUnlike bulky off-road rear bumpers, the WK2 REAR BUMPER GUARD is fully compatible with the rear parking sensors and requires no alteration to the rear parking sensor system.
Compatible With Jeep/Mopar TowbarsDesigned to integrate seamlessly with Jeep-Mopar Towbars (USA & Australian models).
Recessed Mounting BoltsEngineered to deliver a smooth undercarriage and keep bolt heads protected off-road.
Industry Leading Corrosion ProtectionWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.
Real World TestingThere aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.
Top Quality Finishing TouchesWe include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great. -
Requires WK2 REAR BUMPER GUARD (Centre). Bolts into existing mounting points in the frame, no drilling or cutting of OEM parts needed.WK2 Rear Bumper Guard (Corner Protection Kit) fits the following vehicles:2011 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2012 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2013 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2014 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2015 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2016 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2017 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2018 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2019 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2020 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)2021 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)Does NOT fit on the following vehicles:2012-2019 Jeep Grand Cherokee - 3.0L Diesel with DEF Tank (USA Models ONLY)2014-2019 Jeep Grand Cherokee - Summit & High Altitude (including all models with same lower rear bumper/fascia)2012-2019 Jeep Grand Cherokee - SRT (including all models with same lower rear bumper/fascia)Fitment confirmed with the following products:MagnaFlow Stainless MF Series Cat-Back Performance ExhaustINSTALLATION INSTRUCTIONS
Related Items
![ROOF RACK (2x Planks) [1146mm]](http://usa.chiefproducts.com.au/cdn/shop/products/Roof_Rack_2_Plank_Kit_1146mm_-_HERO_{width}x.jpg?v=1578957201)
![ROOF RACK (2x Planks) [1146mm]](http://usa.chiefproducts.com.au/cdn/shop/products/Roof_Rack_2_Plank_Kit_1146mm_-_HERO.jpg?v=1578957201)
ROOF RACK (2x Planks) [1146mm]
$199.99 USD
Chief Products ROOF RACK (Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to easily bolt accessories to the Plank at any point along the entire length.
Chief Products ROOF RACK (Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to easily bolt accessories to the Plank at any point along the entire length.
We provide (2) Planks; each measuring 1146mm (45.12") long, 156mm (6.14") wide, and an amazing 25mm (0.98") thin. We utilise a proprietary Aircraft-Grade Aluminium Alloy and an advanced Extrusion Manufacturing Process that allows us to deliver Planks with an extremely high strength-to-weight ratio.
| 1146mm | PLANK LENGTH (45.12 inches) |
| 156mm | PLANK WIDTH (6.14 inches) |
| 25mm | PLANK THICKNESS (0.98 inches) |
| 2.52kg | INSTALLED WEIGHT --> 1 Plank |
ROOF RACK (4x Plank End-Caps)
$29.99 USD
Chief Products ROOF RACK (Plank End-Caps) provide a nice finish to the ends of our Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Plank End-Caps; enough for (2) Planks. They bolt on easily and feature (7) slots.
Chief Products ROOF RACK (Plank End-Caps) provide a nice finish to the ends of our Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Plank End-Caps; enough for (2) Planks. They bolt on easily and feature (7) slots.
WK2 LOWER FRONT GUARD (Guard KIT)
$46.99 USD
An installation kit for the WK2 LOWER FRONT GUARD. It provides the appropriate centre guard for the WK2 LOWER FRONT GUARD.
An installation kit for the WK2 LOWER FRONT GUARD. It provides the appropriate centre guard for the WK2 LOWER FRONT GUARD.
