Chief Products ROOF RACK (Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to easily bolt accessories to the Plank at any point along the entire length.

We provide (2) Planks; each measuring 1146mm (45.12") long, 156mm (6.14") wide, and an amazing 25mm (0.98") thin. We utilise a proprietary Aircraft-Grade Aluminium Alloy and an advanced Extrusion Manufacturing Process that allows us to deliver Planks with an extremely high strength-to-weight ratio.

Chief Products ROOF RACK (Plank End-Caps) provide a nice finish to the ends of our Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Plank End-Caps; enough for (2) Planks. They bolt on easily and feature (7) slots.

An installation kit for the WK2 LOWER FRONT GUARD. It provides the appropriate centre guard for the WK2 LOWER FRONT GUARD.

Chief Products ROOF RACK (Tie-Down Plates) are engineered to provide multiple ways to secure gear and accessories to your roof rack. They clamp securely between our Planks in a way that allows them to easily locate anywhere along the entire length of the Planks.

Manufactured from Aircraft-Grade Aluminium Alloys and High-Strength Steel, they're extremely strong to meet the high demands they're sure to encounter. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to easily secure any accessories you need. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your roof rack.

Chief Products ROOF RACK (T-Nuts) are engineered to provide maximum performance and compatibility with our Modular Roof Rack System. We offer our (10x) pack of T-Nuts in (3) sizes (M6, M8 & M10) to ensure you have the right size, no matter what accessory you're mounting. Designed to fit perfectly within our Planks, Half-Planks, and Tie-Down Plates. Our high-tensile (10.9) T-Nuts can handle anything you throw at them. Best of all, each T-Nut is protected with a rich black heavy-duty zinc-nickel plating, to ensure it will look great when installed, and stay that way even in the most hostile environments.

Chief Products ROOF RACK (Roof Top Tent KIT) is designed to make installation of your Roof Top Tent super easy. The KIT includes (4) Roof Top Tent Brackets made from 5mm steel. These brackets, along with the mounting hardware from your RTT, enable you to easily and securely clamp your Roof Top Tent onto our Planks. For most customers, this KIT isn't required when using Chief Products ROOF RACK (2x Half-Planks).

Chief Products Tread KIT has been specifically designed as a way to add extra styling to the Chief Products WK2 ROCK RAIL (Treads) have been specifically designed to add extra styling to your WK2 ROCK RAILS (Apex Edition). The treads utilise a dual layer design that increases step traction and provides maximum visual impact. The lower plate is Aluminium with a durable powder coat finish, providing a highly corrosion resistant layer that looks great. The upper plate is made from high-strength steel with E-Coat corrosion protection and heavy-duty textured black powder coating. Together they provide a great looking and very durable step tread for the WK2 ROCK RAILS.

Our WK2 ROOF RACK (Platform Frame) is designed to provide your roof rack with a smooth outside border that looks great, adds strength and delivers improved aerodynamics. The Corners of our Platform Frame are die-cast from a proprietary Aircraft-Grade Aluminium Alloy. The Frame Rails utilise the same Aircraft-Grade Aluminium Alloy, along with an advanced Extrusion Manufacturing Process. We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a product that is light, strong, highly durable, and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.

Chief Products WK2 Winch Cradle provides a high-strength place to mount your winch. It includes critical cooling and drainage holes to ensure your winch stays cool and muddy water drains away. As an added bonus, we include an access hole for users that want to 'clock' their winch. Best of all, we provide (2) versions designed to integrate perfectly with the model year of your WK2.

Chief Products WK2 NUDGE BAR (BASE) provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel and it includes a slotted accessory mounting tab that runs the entire length of the bar, making it extremely easy to mount your accessories. We provide (2) versions, so you can choose the one that best fits the style of your WK2.

An installation KIT for the WK2 Off-Road Front Bumper and WK2 Hidden Winch Mount. It provides the required mounting bracket & hardware for the Quadra-Lift Air Suspension.

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 LOWER FRONT GUARD (Upper Fascia) delivers improved styling for all 2013-2021 Jeep Grand Cherokees with a WK2 LOWER FRONT GUARD installed. The 3-piece design ensures easy installation and a low installed weight. Best of all, we're able to deliver this improved styling without negatively effecting vehicle approach angle or any of the vehicle safety systems.

  FEATURES

  LOW INSTALLED WEIGHT

  DURABLE POWDER COAT FINISH (Textured Black)

  E-COAT (Industry Leading Corrosion Protection)

  EASY INSTALLATION (Difficulty = 2/10)
  SPECIFICATIONS

  2.6kg	INSTALLED WEIGHT
  +4.2°	APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with Standard Guard)
  +2.2°	APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with ACC Guard)
  +10.6°	APPROACH ANGLE (Summit & SRT with Standard Guard)
  +8.6°	APPROACH ANGLE (Summit & SRT with ACC Guard)

  *  Approach Angle calculations represent improvement over stock (based on stock tyres, lower front fascia removed and air suspension in STD height). Raising the air suspension or installing larger tyres will increase the approach angle improvements.

  ---

  * REQUIRED *

  WK2 LOWER FRONT GUARD (Upper Fascia) cannot be installed without WK2 LOWER FRONT GUARD. The (2) products integrate seamlessly to provide robust protection for the front of your WK2.
• STYLE

  Our design team paid attention to every facet, so we could deliver a product that looks great from every angle and compliments the lines of your WK2 with a fully integrated appearance.

  MAXIMUM APPROACH ANGLE

  Since our design doesn't extend past the front of your WK2, the maximum approach angle is retained.

  COMPATIBLE with ALL VEHICLE SYSTEMS

  Full compatibility with all vehicle systems (Air Bags, Blind Spot Monitoring, ParkSense Front & Rear Park Assist System, Adaptive Cruise Control, Full-Speed Forward Collision Warning with Active Braking, LaneSense Lane Departure Warning with Lane Keep Assist & Parallel and Perpendicular Park Assist).

  COMPATIBLE with FRONT RECOVERY POINTS

  Compatible with Chief Products WK2 Recovery Points & WK2 Recovery Hooks (engineer rated to 4,500kg) as well as OEM Tow Hooks (approximate engineer rating of 2,500kg).

  MAXIMUM APPROACH ANGLE

  Since our design doesn't extend past the front of your WK2, the maximum approach angle is retained.

  VEHICLE INTEGRATED DESIGN

  Engineered from the ground up to integrate seamlessly with your WK2 (Jeep Grand Cherokee 2011-2020) and Chief Products WK2 Lower Front Guard. Providing compatibility with all vehicle safety systems, maximum approach angle, a design that doesn't impede critical air flow to the radiator core (critical for towing & off-road performance) and styling that closely matches the lines of your Jeep.

  LOW INSTALLED WEIGHT

  Only 2.6kg when fully installed.

  EASY TO INSTALL

  We provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can install this yourself.

  INDUSTRY LEADING CORROSION PROTECTION

  We utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. This industry-leading process (often only offered by OEMs) ensures full-coverage in hard to reach areas that are often missed by other coating processes. On top of the electrophoretic coating, we apply 80µm of an extremely durable and UV stable powder coat (advanced polyester thermosetting powder). This 2 layer approach ensures maximum corrosion protection for all steel parts.

  REAL WORLD TESTING

  There aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.

  TOP QUALITY FINISHING TOUCHES

  We include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
• Requires WK2 LOWER FRONT GUARD. Bolts to existing mounting points, no drilling or cutting required.
  Fitment confirmed on the following vehicles:

  2013 Jeep Grand Cherokee - All Models & Limited Editions

  2014 Jeep Grand Cherokee - All Models & Limited Editions

  2015 Jeep Grand Cherokee - All Models & Limited Editions

  2016 Jeep Grand Cherokee - All Models & Limited Editions

  2017 Jeep Grand Cherokee - All Models & Limited Editions

  2018 Jeep Grand Cherokee - All Models & Limited Editions

  2019 Jeep Grand Cherokee - All Models & Limited Editions

  2020 Jeep Grand Cherokee - All Models & Limited Editions

  2021 Jeep Grand Cherokee - All Models & Limited Editions

  *  Fits USA & Export models.

  **  Fitment on Summit & High Altitude (2013-2016) requires permanent removal of the lower front fascia.

  ***  Fitment on Summit & High Altitude (2017-2021) and SRT (all model years) requires permanent removal of the lower front fascia and cutting of the plastic bumper.
  Product does NOT fit on the following vehicles:

  2011 Jeep Grand Cherokee - All Models & Limited Editions

  2012 Jeep Grand Cherokee - All Models & Limited Editions

  *  Does not fit (and is not needed) on 2011 & 2012 Jeep Grand Cherokees (due to a different front bumper design).
  Fitment unconfirmed on the following vehicles:

  2018-2020 Jeep Grand Cherokee - Trackhawk
  Fitment confirmed with the following products:

  WK2 LOWER FRONT GUARD

  WK2 NUDGE BAR

  WK2 RECOVERY POINT

  WK2 RECOVERY HOOK
  Product does NOT fit with the following products:

  WK2 OFF-ROAD FRONT BUMPER

  WK2 HIDDEN WINCH MOUNT
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Can I Install This Product Myself?

  Forged In Australia?

  What Warranty Do You Provide?

An installation kit for the WK2 Hidden Winch Mount. It provides a strengthening bracket for the WK2 Lower Front Guard. This bracket is recommended, but not required.

Chief Products ROOF RACK (Half-Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Half-Plank provides a channel for captive T-Nuts. This feature allows you to easily bolt accessories to the Half-Plank at any point along the entire length.

We provide (2) Half-Planks; each measuring 1146mm (45.12") long, 77mm (3.03") wide and an amazing 25mm (0.98") thin. We utilise a proprietary Aircraft-Grade Aluminium Alloy and an advanced Extrusion Manufacturing Process that allows us to deliver Half-Planks with an extremely high strength-to-weight ratio.

Chief Products WK2 Chassis Mounts (Front) provide a secure connection to the front of your WK2 (Jeep Grand Cherokee 2011-2020). Engineered to distribute forces to the chassis of your WK2 over multiple mounting points (for maximum strength and reliability). These Chassis Mounts play a critical role in the Engineer Certified Ratings (10,000lbs WLL) of our WK2 Off-Road Front Bumper and WK2 Hidden Winch Mount. They've been FEA tested, tested by independent 3rd parties (including crash testing for ADR compliance) and real-world tested in numerous scenarios; including off-axis recoveries and snatch block recoveries. In other words, this is a product you can count on when you're stuck in the middle of nowhere and you need it most.

An installation kit for the WK2 Hidden Winch Mount. It provides the required mounting bracket & hardware for the Adaptive Cruise Control Camera.

Chief Products WK2 ROOF RACK (Aero) delivers enhanced styling and aerodynamic performance. Engineered to reduce wind noise by restricting the amount of high-velocity air flowing through the confined space underneath your roof rack (diverting high-velocity air up and over your roof rack).

Ideal for customers wanting optimum aerodynamic performance in high-wind conditions, cross-wind conditions, or regular high-speed driving. WK2 ROOF RACK (Aero) can be used as a replacement for the ROOF RACK (Stealth Air Dam) or in combination.

* ROOF RACK (Stealth Air Dam) provides excellent performance for most customers and is included with every set of Chief Products Mounting Rails.

Chief Products ROOF RACK (Half-Plank End-Caps) provide a nice finish to the ends of our Half-Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Half-Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Half-Plank End-Caps; enough for (2) Half-Planks. They bolt on easily and feature (7) slots.

An installation kit for the WK2 Hidden Winch Mount. It provides the required mounting brackets & hardware for installation of OEM Tow Hooks with WK2 Hidden Winch Mount.

* Please note; this kit will not allow installation of OEM Tow Hooks with any other product. It only provides compatibility for the WK2 Hidden Winch Mount (when the WK2 Hidden Winch Mount is installed on its own).

Chief Products Light Bar Mount KIT provides an easy way to mount larger-deeper light bars on Chief Products WK2 Nudge Bar. Some light bars (with a lot of depth) need to be moved forward to avoid touching the grille, especially on 2013-2015 WK2s. Our Light Bar Mount KIT, moves the light bar forward while also providing extra mounting strength.

Chief Products WK2 ROOF RACK (Mounting Rails) act as the framework for our Modular Roof Rack System. Our unique modular approach, enables customers to build the roof rack they want, and easily reconfigure it whenever their needs change. Customers can have one configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). Customers get one roof rack, that can easily adapt to their needs.

Engineering our Mounting Rails as a key roof rack component, provides another important advantage; industry-leading load ratings (150kg dynamic & 600kg static). Our unique engineering approach, utilises a boxed design that resists deformation at any singular point, which helps transfer forces to the strongest points on the vehicle roof. When our Mounting Rails are combined with our Planks and Half-Planks, we're able to deliver a Modular Roof Rack System that provides customers with an unrivalled combination of modularity and strength.

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 REAR BUMPER GUARD (Corners) is engineered to bolt-on to the WK2 REAR BUMPER GUARD (Centre) and extend protection to the vulnerable rear corners of your WK2. The clean simple design hugs the lines of the rear bumper to provide maximum protection for the rear of your WK2 without ruining your Jeep’s good looks.

  To ensure the WK2 REAR BUMPER GUARD (Corners) is a top-notch product you can trust, we performed (12) months of real-world testing. Our real-world testing included 1000s of kilometers of on-road and off-road testing, including many extremely difficult off-road challenges. Those epxeriences and passionate attention-to-detail led to numerous refinements that increased ease-of-installation, lowered weight, maximised performance and increased strength.

  FEATURES

  HIGH-STRENGTH STEEL (High Strength to Weight Ratio)

  DURABLE POWDER COAT FINISH (Textured Black)

  E-COAT (Industry Leading Corrosion Protection)

  RECESSED MOUNTING BOLTS (Smooth Undercarriage)

  EASY INSTALLATION (Difficulty = 5/10)
  SPECIFICATIONS

  10.75kg	INSTALLED WEIGHT
  23.9°	DEPARTURE ANGLE (Standard Suspension)
  25.9°	DEPARTURE ANGLE (Air Suspension OR2)

  INCLUDES

  2	Corner Guards
  2	Main Mounting Brackets
  2	Corner Mounting Brackets
  2	Exhaust Support Brackets
  4	M10 x 25mm High Tensile (10.9) Bolts (Zinc Plated)
  12	M8 x 25mm High Tensile (10.9) Bolts (Zinc Plated)
  4	M8 x 16mm High Tensile (10.9) Bolts (Zinc Plated)
  4	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  16	M8 Wedge-Lock Extended Washers (Zinc Flake Coating)
  1	4g pouch Anti-Seize
  1	Installation Instructions

  ---

  * REQURIED *

  WK2 REAR BUMPER GUARD (Corners) cannot be installed without WK2 REAR BUMPER GUARD (Centre). The (2) products integrate seamlessly to provide robust protection for the rear of your WK2.
  
  

  * ATTENTION *

  This product does not fit 3.0L diesel models with a DEF Tank (North American 3.0L Models).
• High Strength Off-Road Protection

  Engineered and fully tested to provide off-road protection for the vulnerable rear corners of your WK2. Accomplished via high-strength steel braces and boxed sections to provide maximum strength.

  
  

  Contoured To Fit

  We designed the WK2 REAR BUMPER GUARD to hug the lines of the rear bumper, so it provides off-road protection while remaining unobtrusive.

  
  

  Perfect Integration

  Engineered to integrate seamlessly with the WK2 REAR BUMPER GUARD (Centre) and provide robust off-road protection for the rear of your WK2.

  
  

  Compatible With Rear Parking Sensors

  Unlike bulky off-road rear bumpers, the WK2 REAR BUMPER GUARD is fully compatible with the rear parking sensors and requires no alteration to the rear parking sensor system.

  
  

  Compatible With Jeep/Mopar Towbars

  Designed to integrate seamlessly with Jeep-Mopar Towbars (USA & Australian models).

  
  

  Recessed Mounting Bolts

  Engineered to deliver a smooth undercarriage and keep bolt heads protected off-road.

  
  

  Industry Leading Corrosion Protection

  We utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.

  
  

  Real World Testing

  There aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.

  
  

  Top Quality Finishing Touches

  We include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
• Requires WK2 REAR BUMPER GUARD (Centre). Bolts into existing mounting points in the frame, no drilling or cutting of OEM parts needed.
  WK2 Rear Bumper Guard (Corner Protection Kit) fits the following vehicles:

  2011 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)

  2012 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)

  2013 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)

  2014 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)

  2015 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)

  2016 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)

  2017 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)

  2018 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)

  2019 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)

  2020 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)

  2021 Jeep Grand Cherokee - All Models & Limited Editions (excl. models listed below)
  Does NOT fit on the following vehicles:

  2012-2019 Jeep Grand Cherokee - 3.0L Diesel with DEF Tank (USA Models ONLY)

  2014-2019 Jeep Grand Cherokee - Summit & High Altitude (including all models with same lower rear bumper/fascia)

  2012-2019 Jeep Grand Cherokee - SRT (including all models with same lower rear bumper/fascia)
  Fitment confirmed with the following products:

  MagnaFlow Stainless MF Series Cat-Back Performance Exhaust
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Can I Install This Product Myself?

  Forged In Australia?

  What Warranty Do You Provide?

  What Products Are Compatible With Luxury Model WK2s (Summit, High Altitude, SRT, etc.)?

Chief Products ROOF RACK (Adjustable Load Rails) are engineered to be multi-functional; acting as a border, divider, grab handle or high-strength way to secure gear. Using our T-Nuts, they can be easily mounted anywhere on your roof rack. Sideways, crossways, or bridging across multiple Planks. We provide (3) different sizes, so you can combine multiple Load Rails to create the exact configuration you need. Want to change your configuration? Loosen the t-nuts, slide the Load Rails into a new position, and retighten. It's that simple!

We've utilised the latest manufacturing techniques and Aircraft-Grade Aluminium Alloys to deliver a product that is light, strong, highly-durable and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.

An installation kit for the WK2 Off-Road Front Bumper. It provides the required mounting bracketry & hardware for the Adaptive Cruise Control Camera.

Chief Products WL74 ROOF RACK (Mounting Rails) act as the framework for our Modular Roof Rack System. Our unique modular approach, enables customers to build the roof rack they want, and easily reconfigure it whenever their needs change. Customers can have one configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). Customers get one roof rack, that can easily adapt to their needs.

Engineering our Mounting Rails as a key roof rack component, provides another important advantage; industry-leading load ratings (150kg dynamic & 460kg static). Our unique engineering approach, utilises a boxed design that resists deformation at any singular point, which helps transfer forces to the strongest points on the vehicle roof. When our Mounting Rails are combined with our Planks and Half-Planks, we're able to deliver a Modular Roof Rack System that provides customers with an unrivalled combination of modularity and strength.

Chief Products WL75 ROOF RACK (Mounting Rails) act as the framework for our Modular Roof Rack System. Our unique modular approach, enables customers to build the roof rack they want, and easily reconfigure it whenever their needs change. Customers can have one configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). Customers get one roof rack, that can easily adapt to their needs.

Engineering our Mounting Rails as a key roof rack component, provides another important advantage; industry-leading load ratings (150kg dynamic & 460kg static). Our unique engineering approach, utilises a boxed design that resists deformation at any singular point, which helps transfer forces to the strongest points on the vehicle roof. When our Mounting Rails are combined with our Planks and Half-Planks, we're able to deliver a Modular Roof Rack System that provides customers with an unrivalled combination of modularity and strength.

Chief Products ROOF RACK (Platform Frame) is designed to provide your roof rack with a smooth outside border that looks great, adds strength, and delivers improved aerodynamics. The corners of our Platform Frame are die-cast from a proprietary Aircraft-Grade Aluminium Alloy. The frame rails utilise the same Aircraft-Grade Aluminium Alloy combined with an advanced Extrusion Manufacturing Process. We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a product that is light, strong, highly durable and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.

An installation kit for WK2 Rear Bumper Guard (Corners). It provides the required exhaust mounting bracket & hardware for single exhaust WK2s.

Chief Products WK2 Nudge Bar (Mounting Arms Upgrade KIT) allows customers with an older WK2 Nudge Bar (purchased before October 2019) to upgrade to the latest Mounting Arms. These new Mounting Arms provide more adjustment, allowing customers to mount their WK2 Nudge Bar closer to (or farther from) the vehicle. Mounting closer to the vehicle can be helpful when having troubles with the parking sensor system. Mounting farther from the vehicle can be helpful when a customer needs more space to mount larger off-road lights.

Chief Products N280 ROOF RACK (Mounting Rails) act as the framework for our Modular Roof Rack System. Our unique modular approach, enables customers to build the roof rack they want, and easily reconfigure it whenever their needs change. Customers can have one configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). Customers get one roof rack, that can easily adapt to their needs.

Engineering our Mounting Rails as a key roof rack component, provides another important advantage; industry-leading load ratings (150kg dynamic & 460kg static). Our unique engineering approach, utilises a boxed design that resists deformation at any singular point, which helps transfer forces to the strongest points on the vehicle roof. When our Mounting Rails are combined with our Planks and Half-Planks, we're able to deliver a Modular Roof Rack System that provides customers with an unrivalled combination of modularity and strength.

Chief Products ROOF RACK (Platform Frame) is designed to provide your roof rack with a smooth outside border that looks great, adds strength, and delivers improved aerodynamics. The corners of our Platform Frame are die-cast from a proprietary Aircraft-Grade Aluminium Alloy. The frame rails utilise the same Aircraft-Grade Aluminium Alloy combined with an advanced Extrusion Manufacturing Process. We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a product that is light, strong, highly durable and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.

Chief Products P375-P703-AM2G-UP-UR ROOF RACK (Aero) delivers enhanced styling and aerodynamic performance. Engineered to reduce wind noise by restricting the amount of high-velocity air flowing through the confined space underneath your roof rack.

Ideal for customers wanting optimum aerodynamic performance in high-wind conditions, cross-wind conditions, or regular high-speed driving. P375-P703-AM2G-UP-UR ROOF RACK (Aero) can be used as a replacement for the ROOF RACK (Stealth Air Dam) or in combination.

* ROOF RACK (Stealth Air Dam) provides excellent performance for most customers and is included with every set of Chief Products Mounting Rails.

Chief Products J200 ROOF RACK (Mounting Rails) act as the framework for our Modular Roof Rack System. Our unique modular approach, enables customers to build the roof rack they want, and easily reconfigure it whenever their needs change. Customers can have one configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). Customers get one roof rack, that can easily adapt to their needs.

Engineering our Mounting Rails as a key roof rack component, provides another important advantage; industry-leading load ratings (150kg dynamic & 460kg static). Our unique engineering approach, utilises a boxed design that resists deformation at any singular point, which helps transfer forces to the strongest points on the vehicle roof. When our Mounting Rails are combined with our Planks and Half-Planks, we're able to deliver a Modular Roof Rack System that provides customers with an unrivalled combination of modularity and strength.

Chief Products P375-P703-AM2G-UP-UR ROOF RACK (Mounting Rails) act as the framework for our Modular Roof Rack System. Our unique modular approach, enables customers to build the roof rack they want, and easily reconfigure it whenever their needs change. Customers can have one configuration for around town (surfing-kayaking-mountain biking). Then easily change to another configuration for camping-expedition-overlanding (maximum gear, roof top tent, etc.). Customers get one roof rack, that can easily adapt to their needs.

Engineering our Mounting Rails as a key roof rack component, provides another important advantage; industry-leading load ratings (150kg dynamic & 460kg static). Our unique engineering approach, utilises a boxed design that resists deformation at any singular point, which helps transfer forces to the strongest points on the vehicle roof. When our Mounting Rails are combined with our Planks and Half-Planks, we're able to deliver a Modular Roof Rack System that provides customers with an unrivalled combination of modularity and strength.

Chief Products ROOF RACK (Platform Frame) is designed to provide your roof rack with a smooth outside border that looks great, adds strength, and delivers improved aerodynamics. The corners of our Platform Frame are die-cast from a proprietary Aircraft-Grade Aluminium Alloy. The frame rails utilise the same Aircraft-Grade Aluminium Alloy combined with an advanced Extrusion Manufacturing Process. We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a product that is light, strong, highly durable and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.

Chief Products ROOF RACK (Platform Frame) is designed to provide your roof rack with a smooth outside border that looks great, adds strength, and delivers improved aerodynamics. The corners of our Platform Frame are die-cast from a proprietary Aircraft-Grade Aluminium Alloy. The frame rails utilise the same Aircraft-Grade Aluminium Alloy combined with an advanced Extrusion Manufacturing Process. We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a product that is light, strong, highly durable and accomplishes a degree of fit-and-finish you have to see in person to truly appreciate.