WK2 ROCK RAILS (Treads)
by: Chief Products
Out of Stock Pre-Order $211.99 USD $309.99 USD
Notify Me
Give us a few of your details and we'll notify you when this product is available.
Success!
You'll be notified when the product becomes available again.
Oops!
Something went wrong. Please try again later.
Chief Products WK2 ROCK RAIL (Treads) have been specifically designed to add extra styling to your WK2 ROCK RAILS (Apex Edition). The treads utilise a dual layer design that increases step traction and provides maximum visual impact. The lower plate is Aluminium with a durable powder coat finish, providing a highly corrosion resistant layer that looks great. The upper plate is made from high-strength steel with E-Coat corrosion protection and heavy-duty textured black powder coating. Together they provide a great looking and very durable step tread for the WK2 ROCK RAILS.
Chief Products Tread KIT has been specifically designed as a way to add extra styling to the Chief Products WK2 ROCK RAIL (Treads) have been specifically designed to add extra styling to your WK2 ROCK RAILS (Apex Edition). The treads utilise a dual layer design that increases step traction and provides maximum visual impact. The lower plate is Aluminium with a durable powder coat finish, providing a highly corrosion resistant layer that looks great. The upper plate is made from high-strength steel with E-Coat corrosion protection and heavy-duty textured black powder coating. Together they provide a great looking and very durable step tread for the WK2 ROCK RAILS.
Category: EXTRA PRODUCT SIDE VEHICLE (Component)
Share:
- SPStephen P.Verified BuyerI recommend this productRated 5 out of 5 stars3 years agoRock runners and treads
A very well engineered produce and are truely built to be rock runners as well as looking great. A few things when you go to install them however. Make sure you read through everything to begin with in particular the little special notes for various parts of the job. Don't think you are going to rush the job either, give yourself plenty of time. I did the first side in about 3 hours by myself which was a comfortable amount of time and once I know the little tricks the second side was half that. You will need to go back to the computer a few time to get a closer look at to which way the clamps and some parts go so you know you are getting them in the correct way. You will also have to lean on the tread pattern O or R when you go to screw these down as the clamp rails B sit up proud of the rock runner A before they are screwed down. You may need to put some heavy pressure on the clamp tab to get it down enough to start the fixing bolts. Once started you can work them along the rail and they pull down flat, a solid tap with a drift and hammer on the tabs to make sure they slot down into the relief notch in the rail helps also. The good thing however is that they are a very firm fit and once clamped down do not rattle and are not moving.
Was this helpful? - LLarsVerified BuyerI recommend this productRated 4 out of 5 stars4 years agoRails for Summit
I recently purchased the rock rails for my 2018 WK2 Summit. The installation went fairly well with the exception of the first mounting hole not lining up with the body. The other 5 were fine. I had to grind the slotted holes larger by more than half the diameter of the hole. Also after it was installed I noticed the rails are about 1 inch to short on each end and do not line up with the body. I emailed Chief Products about the issues and they informed me that they design the rails to a certain model WK2 which happens to be not the Summit.
The over all quality seems to be good, I have not had time to try them out on the trail.
Was this helpful?
Related Items
ROOF RACK (2x Planks) [1146mm]
Out of Stock Pre-Order $199.99 USD
Chief Products ROOF RACK (Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to easily bolt accessories to the Plank at any point along the entire length.
Chief Products ROOF RACK (Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to easily bolt accessories to the Plank at any point along the entire length.
We provide (2) Planks; each measuring 1146mm (45.12") long, 156mm (6.14") wide, and an amazing 25mm (0.98") thin. We utilise a proprietary Aircraft-Grade Aluminium Alloy and an advanced Extrusion Manufacturing Process that allows us to deliver Planks with an extremely high strength-to-weight ratio.
1146mm | PLANK LENGTH (45.12 inches) |
156mm | PLANK WIDTH (6.14 inches) |
25mm | PLANK THICKNESS (0.98 inches) |
2.52kg | INSTALLED WEIGHT --> 1 Plank |
Keep me updated
Give us a few of your details and we'll keep you updated on this product.
Notify Me
Give us a few of your details and we'll notify you when this product is available.
ROOF RACK (4x Plank End-Caps)
Out of Stock Pre-Order $29.99 USD
Chief Products ROOF RACK (Plank End-Caps) provide a nice finish to the ends of our Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Plank End-Caps; enough for (2) Planks. They bolt on easily and feature (7) slots.
Chief Products ROOF RACK (Plank End-Caps) provide a nice finish to the ends of our Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Plank End-Caps; enough for (2) Planks. They bolt on easily and feature (7) slots.
Keep me updated
Give us a few of your details and we'll keep you updated on this product.
Notify Me
Give us a few of your details and we'll notify you when this product is available.
WK2 LOWER FRONT GUARD (Guard KIT)
Out of Stock Pre-Order $46.99 USD
An installation kit for the WK2 LOWER FRONT GUARD. It provides the appropriate centre guard for the WK2 LOWER FRONT GUARD.
An installation kit for the WK2 LOWER FRONT GUARD. It provides the appropriate centre guard for the WK2 LOWER FRONT GUARD.
Keep me updated
Give us a few of your details and we'll keep you updated on this product.
Notify Me
Give us a few of your details and we'll notify you when this product is available.
Keep me updated
Give us a few of your details and we'll keep you updated on this product.
Notify Me
Give us a few of your details and we'll notify you when this product is available.